Jump to content

Low/low 95g driving iron shaft


mBiden2
 Share

Recommended Posts

I’m looking for some suggestions for a low/low driving iron shaft. It will only be used of the tee. Thanks!

Driver: TaylorMade SIM MAX (10.5 degrees - set to 9.75 and 1.5 degrees open)

Shaft: Aldila Rogue 130 White 70 TX (at 45" and tipped 1")

3-wood: TaylorMade SIM (15 degrees)

Shaft: Aldila Rogue 130 Black 70 TX (at 43" and tipped 1")

UDI: *** Under Construction ***

Irons: TaylorMade P-7MC 4-PW (1 degree upright)

Shaft: Nippon Pro Modus3 Tour 120 X

Wedges: Cleveland RTX Zipcore Tour Rack (Raw) 52.10, 56.12 & 60.12

Shaft: Nippon Pro Modus3 Wedge 125

Putter: Scotty Cameron Newport 2 Mid-Slant (at 34")

Link to comment
Share on other sites

  • Replies 26
  • Created
  • Last Reply

Top Posters In This Topic

recoil makes a good driving iron shaft. I forget the model number but it's an option on the new Callaway x forged driving iron if you wanted to check there.

 

Thanks. I’ll have to check it out

Driver: TaylorMade SIM MAX (10.5 degrees - set to 9.75 and 1.5 degrees open)

Shaft: Aldila Rogue 130 White 70 TX (at 45" and tipped 1")

3-wood: TaylorMade SIM (15 degrees)

Shaft: Aldila Rogue 130 Black 70 TX (at 43" and tipped 1")

UDI: *** Under Construction ***

Irons: TaylorMade P-7MC 4-PW (1 degree upright)

Shaft: Nippon Pro Modus3 Tour 120 X

Wedges: Cleveland RTX Zipcore Tour Rack (Raw) 52.10, 56.12 & 60.12

Shaft: Nippon Pro Modus3 Wedge 125

Putter: Scotty Cameron Newport 2 Mid-Slant (at 34")

Link to comment
Share on other sites

KBS Prototype hybrid graphite can be sanded slightly to fit a driving iron. One word ...Awesome

Ping G410 Plus Project X HZRDUS Green smoke 6.0
Callaway Epic Flash SZ 3w with Project X HZRDUS Smoke 6.0
Titleist 813H PX evenflow blue
Srixon ZU65 4iron KBS prototype graphite
Srixon Z785 5-P with KBS S-taper

Ping glide stealth 50, 54 project x LZ
Callaway Pm 2 60 KBS Hi Rev
Bettinardi BBZero DASS with Stability shaft
Link to comment
Share on other sites

KBS Prototype hybrid graphite can be sanded slightly to fit a driving iron. One word ...Awesome

 

That’s one of the ones I’ve been looking at, so that’s good to hear!

Driver: TaylorMade SIM MAX (10.5 degrees - set to 9.75 and 1.5 degrees open)

Shaft: Aldila Rogue 130 White 70 TX (at 45" and tipped 1")

3-wood: TaylorMade SIM (15 degrees)

Shaft: Aldila Rogue 130 Black 70 TX (at 43" and tipped 1")

UDI: *** Under Construction ***

Irons: TaylorMade P-7MC 4-PW (1 degree upright)

Shaft: Nippon Pro Modus3 Tour 120 X

Wedges: Cleveland RTX Zipcore Tour Rack (Raw) 52.10, 56.12 & 60.12

Shaft: Nippon Pro Modus3 Wedge 125

Putter: Scotty Cameron Newport 2 Mid-Slant (at 34")

Link to comment
Share on other sites

KBS hybrid is not low/low at all.

 

Tensei Pro white

HZRDUS 105x if you can find one

Matrix Black Tie

Diamana Thump

  • G410 LST 9* - Diamana D+ Limited 70TX
  • TM SIM Ti 14.25* - Fuji Pro 2.0 Tour Spec 7X
  • TM M5 Ti 18.25* - Fuji Pro 2.0 Tour Spec 7X
  • PXG 0311T Gen3 4-PW MMT 125TX/105TX (4i)
  • Wilson FG Tour V4 50* - MMT 125TX
  • Mizuno T7 55* - PX LZ 6.5
  • Vokey TVD 60M - DG TI Onyx S400
  • Odyssey Rossie WHP
  • Bridgestone Tour B XS

 

 

 

Link to comment
Share on other sites

Fujikura Atmos Black Tour Spec HB, it's .370 hybrid tip but pretty sure I've seen a couple people sand them down to put them in driving irons. Easy to load but extremely stable and definitely LOW/LOW.

Driver: Epic SZ 9* / Fujikura Atmos TS Black 6X
Wood: TM Paint Break V Steel 16.5* 4W / Diamana BB 83X
Hybrid: Adams Pro Red Tour Issue 20* / Fujikura Atmos HB TS Black 9X
Irons: Mizuno MP-64 4-PW / KBS C-Taper S+ hs once
Wedges: Miura 51y / KBS C-Taper S+, Miura 55c/ KBS .610 S+, Miura 59c / KBS Tour S+
Putter: Bettinardi BB1F
Ball: 2015 Bridgestone Tour B330S or 2017 Srixon XV

Link to comment
Share on other sites

If you want low/low then

 

Tensei Pro White 90tx

 

Aldila RIP Alpha 105

 

Speeder 904HB

Cobra Bio Cell 9.5// HZRDUS Black
Cobra F6 Baffler 17.5 // HZRDUS Black
Cobra F7 Hybrid 20.5// ATMOS Tour Spec Blue
Mizuno JPX 900 Forged 5-GW // Project X
Taylormade Mill Grind 52 // Nippon 120
Taylormade Mill Grind 58 // Nippon 120
Taylormade Tour Spider Black

Link to comment
Share on other sites

Agree with Albatross85 above, KBS Hybrid Proto - while a fantastic shaft - is not low/low. I use it in my longest standard iron as its higher launching than my C-Tapers.

 

Would second the Hzrdus Black and Tensei White hybrids and also throw in the Oban Kiyoshi White which comes in a 95g option.

 

That’s interesting. I might have the give that a shot in my 4 iron

Driver: TaylorMade SIM MAX (10.5 degrees - set to 9.75 and 1.5 degrees open)

Shaft: Aldila Rogue 130 White 70 TX (at 45" and tipped 1")

3-wood: TaylorMade SIM (15 degrees)

Shaft: Aldila Rogue 130 Black 70 TX (at 43" and tipped 1")

UDI: *** Under Construction ***

Irons: TaylorMade P-7MC 4-PW (1 degree upright)

Shaft: Nippon Pro Modus3 Tour 120 X

Wedges: Cleveland RTX Zipcore Tour Rack (Raw) 52.10, 56.12 & 60.12

Shaft: Nippon Pro Modus3 Wedge 125

Putter: Scotty Cameron Newport 2 Mid-Slant (at 34")

Link to comment
Share on other sites

Agree with Albatross85 above, KBS Hybrid Proto - while a fantastic shaft - is not low/low. I use it in my longest standard iron as its higher launching than my C-Tapers.

 

Would second the Hzrdus Black and Tensei White hybrids and also throw in the Oban Kiyoshi White which comes in a 95g option.

 

That’s interesting. I might have the give that a shot in my 4 iron

 

That's exactly what I did. It's sort of a 3.5 iron now - slightly strong 4 iron head (23*) playing on a 3 iron length KBS Proto 95x. It sits well between my 5 iron and 2 hybrid - which I have shafted with the Oban I mentioned above.

Link to comment
Share on other sites

Veylix 988

TM SIM 10.5* - Ventus Velocore Blue 6S
TEE  CBX119  2h  17* Aldila Rogue Black 85TS 
TEE  XCG7B  4h  22* Aldila Rogue Black 85TS
TEE  XCG7B  5h  25* Diamana Thump i465ct 4iron shaft
Wishon 560MC 5-PW (27,31,35,39,43.5,48) DG120 S300
Vokey SM4 52-08F S200
Wishon HM wedges 56/60 Wishon Smooth steel Stiff
2013-2016 SC Futura X5R 33' flownecked by Bastain-cerakote sniper gray-silver dots-white flange sight line-SS Flatso 2.0

2012-2013 SC California Sonoma 33" -SS Flatso 2.0
TM TP5x

Link to comment
Share on other sites

Thanks for all the suggestions. I’m gonna try and get my hands on a pro white 90TX

Driver: TaylorMade SIM MAX (10.5 degrees - set to 9.75 and 1.5 degrees open)

Shaft: Aldila Rogue 130 White 70 TX (at 45" and tipped 1")

3-wood: TaylorMade SIM (15 degrees)

Shaft: Aldila Rogue 130 Black 70 TX (at 43" and tipped 1")

UDI: *** Under Construction ***

Irons: TaylorMade P-7MC 4-PW (1 degree upright)

Shaft: Nippon Pro Modus3 Tour 120 X

Wedges: Cleveland RTX Zipcore Tour Rack (Raw) 52.10, 56.12 & 60.12

Shaft: Nippon Pro Modus3 Wedge 125

Putter: Scotty Cameron Newport 2 Mid-Slant (at 34")

Link to comment
Share on other sites

Black Tie HM3 comes in 95g. For iron shafts, I've heard the Fuji Pro 95i Tour Spec is low/low, or at least very flat hitting. I have the Tensei Pro White 90 in my hybrid and love it. My personal favorite is the old Project X HB6 which also came in .355 taper tip. SteelFiber i95 isn't as low hitting as others but if you hard step it, it'll hit lower. A cheap experiment would be the UST Elements Earth/Terra 100.

SiM2 Max 9°  Fujikura Ventus 6
SiM  5° Fujikura Atmos TS 7
790UDI  PX Catalyst 80  //  818H2  19°  GD Tour AD IZ-85
0311T  4i / Z745  5-9  Nippon 950GH 
SM7 46F 52F 58D  DG 115
SM7 62M  KBS Tour
putter, KBS CT Tour, Pro Only *
(¬¬)

Link to comment
Share on other sites

The Fujikura Pro 95 Tour Spec iron shafts would fit the description

TaylorMade SIM2 10.5* (turned down to 9*) - Fujikura Speeder TR 857X

TaylorMade SIM2 Rocket 13.5* - Fujikura Rombax P95X

NIKE Vapor Fly Pro 3-4 - Fujikura Pro Tour Spec 95X

Mizuno JPX 919 Tour 5-9 - DG TI X100

TaylorMade MG Tour Chrome 46*, Raw 50*, Raw 55* - DG TI S400

TaylorMade Tour Hi Toe Raw Face 60* - DG TI S400

Scotty Cameron Select Squareback +

 

Link to comment
Share on other sites

I would skip the hybrid shafts and go Aerotech i95, Accra 95 cwt or 100i Tour, Ust Recoil 95 proto, or Fuji Pro 95 TS

Callaway Mav SZ 10.5° - Aldila Rogue White 60
Titleist 915 fairway 15° - Aldila Tour Blue 75

Ping G410 Crossover (2) - Nippon Modus 105
Taylormade P790 (4-PW) - Nippon Modus 105
Vokey SM8 49° & 54° SM4 59° - Nippon 1050gh
Bettinardi Inovai 6.0 CTR

Link to comment
Share on other sites

Nobody said it but an ADDI 95 or 105x if you tip it a smidge is as low low as I can imagine you wanting. I mean I can hit it high if I want to. But I can hit it as a low bullet In a 816 h2 21 degree hybrid. Lower than that spike have to be steel of some make.

TM Sim2 max 9* TB 70TX

TM 300 13.5* Tensei CK blue 80TX

TM Sim2 max 17hL MMT 70x 

Callaway  xforged UT 21 ventus blue 9x 

Titleist T100 4-pw MMT 125 TX 

Edel sms 54 58 MMT 125 TX 

Cameron GSS 009  1.5 , sound slot , tungsten sole weights , head speed shaft. 

Link to comment
Share on other sites

Project X Tour Issue Hybrid (the BLUE)

 

HB6 - 97 grams flex 7.0

HC1 - 95 grams flex 6.5

HD2 - 92 grams flex 6.0

 

This shafts can be hard or soft stepped to get wgt and flex right, and is the best LOW/LOW shafts ive been working on for both hybrids and driving irons, and since its discontinued now, it can be found as bargains.

 

i use the HE6 - 85 grams 5.5 flex in my 2 hybrids (H5/27* and H4/24*) smooth and stable

Link to comment
Share on other sites

Aldila Rip Tour iron shafts are pretty low/low form my experience, and are roughly $40 shipped to your door.

Epic Speed LS 🔷🔷🔷 9* Hzrdus Hulk Smoke 6.5TX
Nike Vapor Fly 3HL Matrix 8M2
Titleist 910HD Fuji HB 90/Nike VFP 3 Fuji P95X
T-MB 4 C-Taper 130X

T-MB 5 PX LS 7.0
6-PW Cobra King Forged CB PX LS 7.0
Vokey TVD 52/58 KBS Tour 130X
PM Grind 64 KBS Tour 130X
Studio Design 1.5 Circle T/Arm Lock Double Wide

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Our picks


×
×
  • Create New...