Jump to content

RAW IRONS POST YOUR PICS


magsgolfho

Recommended Posts

2 hours ago, tmz016 said:

 

Depends on how you remove the finish. Some finishes is removed by vinegar and that won’t effect the weight at all.

 

Removing chrome will strip a few grams but that’ll be compensated with tip weights rather than lead tape, especially on raw heads (my own opinion of course). Im using lead tape quite frequently but I prefer tip weights when dealing with raw heads 

Got it. That's easy enough. I'm a novice when it comes to club building, as you can tell...

Link to comment
Share on other sites

3 hours ago, dvq9654 said:

Sorry if this was already asked, but for those who have stripped a set of heads, how did you account for the change in swing weight? I don't see a lot of lead tape in the photos, so assuming you just accepted the difference in swing weight. Any issues there?

Tip weights in mine 

Cobra LTDx LS  9* fuji ventus black 6x

Callaway Rogue ST LS 15* Ventus Black 8x 

Titleist TSi3 20* hybrid Matrix Black Tie 90x 
Mizuno MP20 - 4-Pw  / Dg120 x100 
Cleveland RTX4 50/54/ S400 TI Onyx 
Vokey Wedgeworks 60* V-grind 
Oddessey 7CS Tour / white ice #1 
Link to comment
Share on other sites

16 hours ago, dvq9654 said:

Sorry if this was already asked, but for those who have stripped a set of heads, how did you account for the change in swing weight? I don't see a lot of lead tape in the photos, so assuming you just accepted the difference in swing weight. Any issues there?

I weighed them all before hand, they all lost (z785) about 7-8 grams so we did 8g tip weights in all of them on the rebuild. I had a set once that lost 2-3 grams so I didnt bother with tip weights

Titleist TSi3 8° (set to 7°) - Accra TZ6 65 M5 

Cobra Rad Speed Tour 5 Wood 16° - Speeder 757 Evo TS X

Mizuno MP Fli Hi 18° - C Taper 125 S+
Mizuno MP Fli Hi 23° - C Taper 120 S
Srixon z785 5-PW - KBS TourV X
Ping Glide Pro Forged 50°/54°/Eye Toe 59°  - Tour S400
Seemore mFGP2 
Podcast - "Rough Fairways - A Journey to the PGA Tour" available on Spotify - Pandora - Apple

Link to comment
Share on other sites

This off season I had my Wishon SLs stripped raw and blasted smooth. I also bought a set of Haywood awedges in raw. I'll betting these patina naturally. 

IMG_20220209_132609_715.jpg

IMG_20220209_132616_747.jpg

IMG_20220209_132623_843.jpg

  • Like 2

PING G400 Max w/ Aldila Rogue Silver
Wishon 929  Fairway - Aldila Rogue Max

Wishon 929 Hybrid - Aldila Rogue Black

Wishon Sterling Irons - FST 115
Cleveland CBX Zipcore Wedges - Nippon Modus 115 

BBFandCo Roulette
MannKrafted Carbon Rattler XL
TP Mills Stainless Softtail
Cevevelend HB SOFT 11 - SGC modified 

Link to comment
Share on other sites

18 minutes ago, mogc60 said:

Here are the iron blanks I’ve been grinding into shape. I was going to plum brown finish these but after running them through a tumbler the finish turned out so good I’m just going to leave them and try to keep rust in check by adding barricade rust preventer on a regular basis. 

8B320D91-5FB6-45CA-B0B9-3C895F1B20BC.jpeg

9A41A7A4-5FBF-4A62-932C-BC10F298204A.jpeg

D0977DAB-3117-4A1E-9930-2EBE5F4E194E.jpeg

9252FAE1-1191-48B5-84CD-2DD9F75A872C.jpeg

0F4E9780-177D-42F4-8C16-D4DDBCB3A906.jpeg

Wow, very cool and unique.  Hope you have an awesome set when all finished

Taylormade M4 tour 8.5*   Attas 4U 6X

Callaway Maverick  13.5*   Rogue 70X 

Taylormade P790 2 iron  HZRDUS 6.5

Srixon Z785 4 iron Modus 120x

Callaway Apex MB 5-PW Modus 120x

Bridgestone WestCoast design wedges 56,60

Cleveland CMM 48 Bullseye 
-----------------------------------------

Link to comment
Share on other sites

58 minutes ago, NixLix26 said:

Wow, very cool and unique.  Hope you have an awesome set when all finished

Thanks man it’s been a fun project I’ve wanted to do for a long time. Probably going to shaft them up today. 

COBRA LTDX LS 9* MATRIX MARU RED 70 TX 
COBRA FLY Z + 14.5* EVENFLOW BLACK 75 X                                                                             WILSON M5 TOUR 17* ALDILA ROGUE STIFF.                                           TITLEIST U510 3 ALDILA PHENOM 100 stiff.                                    

OICHI CUSTOM GROUND BLANKS 5-PW CATALYST 100 6.5                                    CALLAWAY JAWS FULL 54* MMT 125 Stiff.                                        CALLAWAY JAWS FULL 58* MMT 125 Stiff.                                         NATIONAL CUSTOM NICOLL BLADE SNELL MTB-X

 

 

Link to comment
Share on other sites

On 2/10/2022 at 4:36 AM, mogc60 said:

Here are the iron blanks I’ve been grinding into shape. I was going to plum brown finish these but after running them through a tumbler the finish turned out so good I’m just going to leave them and try to keep rust in check by adding barricade rust preventer on a regular basis. 

8B320D91-5FB6-45CA-B0B9-3C895F1B20BC.jpeg

9A41A7A4-5FBF-4A62-932C-BC10F298204A.jpeg

D0977DAB-3117-4A1E-9930-2EBE5F4E194E.jpeg

9252FAE1-1191-48B5-84CD-2DD9F75A872C.jpeg

0F4E9780-177D-42F4-8C16-D4DDBCB3A906.jpeg

2C8857BB-4937-4792-A808-B5D77D745983.jpeg

Very cool. Where did you get the blanks? 

WITB: Epon, Ryoma, A-Grind, Yururi, Bettinardi
[url="http://www.golfwrx.com/forums/topic/1408766-my-bag-pic-heavy-jdm/"]http://www.golfwrx.c...-pic-heavy-jdm/[/url]

[b]Trees may be 90% air but they're 100% angry.[/b]

Link to comment
Share on other sites

28 minutes ago, marmaduk said:

Very cool. Where did you get the blanks? 

Tourspec golf out of Japan 

COBRA LTDX LS 9* MATRIX MARU RED 70 TX 
COBRA FLY Z + 14.5* EVENFLOW BLACK 75 X                                                                             WILSON M5 TOUR 17* ALDILA ROGUE STIFF.                                           TITLEIST U510 3 ALDILA PHENOM 100 stiff.                                    

OICHI CUSTOM GROUND BLANKS 5-PW CATALYST 100 6.5                                    CALLAWAY JAWS FULL 54* MMT 125 Stiff.                                        CALLAWAY JAWS FULL 58* MMT 125 Stiff.                                         NATIONAL CUSTOM NICOLL BLADE SNELL MTB-X

 

 

Link to comment
Share on other sites

On 1/21/2022 at 11:06 PM, jorgesgolf2 said:

Question:  does anyone REGRET having their irons raw?  You'll lose some weight and that could make the subsequent build tricky but has anyone found that the feel is worse (blasphemy, I know)?  We all know how rechroming can potentially be detrimental to feel and I don't want to ruin a good set of irons.  

 

Case in point:  I just picked up some MP-29 heads in 3-PW.  Here is a pic of the 7 iron (worst in the set):  

IMG_1830.jpg.abeff10ef78f5dfcb8c05d660b91c19b.jpg

 

Significant wear mark on the face but the chrome is in good shape and very little bag chatter for an iron this age:  What do you think?  Worthy of getting stripped or leave them alone?  I wouldn't rechrome them and I would like to have a unique set but also wouldn't want to lose so much weight that I ruin a set of irons that have a lot of life left in them - decisions, decisions...

925549314_IMG_1831copy.jpg.236f4525ab74cd1271ce1456a2c636d4.jpg

 

 

Don’t know if you e sent these off yet or not, but the MP29s are the one set I would not have stripped. They have a layer of copper between the nickel and chrome that made them one of the softest feeling irons of all time. 
 

I say that as a guy who loves Mizuno and played a set of raw MP33s until the grooves were gone and stripped his Honmas before he even hit them. Raw “feels” better/softer because the sound is more muted than the click of chrome and sound = feel which you can confirm by wearing headphones/ear plugs sometime when practicing. Muted sound = softer feel. Even Pinnacle range balls feel “softer” when you can’t hear the contact, IMO. 

  • Like 1

WITB:
Driver: Taylormade SIM 2  
3W: Honma TR21  
4-6: Honma TR-21V  

7-10: Honma TR21B  
52*: Vokey 52F
58*: Vokey 58D
64*: Vokey 64M (62 bent to 64)
Putter: Depends on the day and which ones are in time out
Ball: ProV1x

Link to comment
Share on other sites

On 12/8/2019 at 11:25 AM, seasuks said:

Here you go...full before and after on a set of Honma Rose Proto 4 - 10.

Before After

4 250g 245g

5 255g 253g

6 262g 253g

7 268g 265g

8 275g 270g

9 284g 280g

10 291g 286g

Obviously the weight loss on each head wasn't the same. The 5 iron only lost two grams while the 6 iron lost nine. Fortunately, I also measured the tip weights that were used when they were initially installed so I know what the total weights were assembled. When they came from the factory they were mostly in the D5 - D6 range, which I actually like, but to make sure they were consistent throughout the set when I reassembled, I went down to D3 since I couldn't find any tip weights that were more than 10g. If they feel too light when I hit them later this week I'll add lead tape to get them back up.

I'm a big believer that if I can't play good, I at least want my clubs to look good, so I went with some BB&F ferrules and let my nine year old son do the paint fill. I know the ferrules don't look as good as if many of y'all would have done it, but given that I only have a rag and acetone vice a 1" belt sander/polisher, it'll do since they eventually get beat up anyway.

I used gun blue on them like I did with my MP 33s many years ago because it hides the stage of orange rust between raw and the good brown oxide layer that develops over the course of a few months. In person it kind of looks like they were torched, but what's blue/black now will become a dark chocolate brown over time.

 

Q0XXZOMY1L7D.jpg

BWHLFKBABQHK.jpg

69NDOOWEBPNV.jpg

G1O0HUGHSZ1F.jpg

 

 

 

 

Current pics of same clubs after redoing the ferrules and paint fill in the summer of 2020.  They've sat in the garage since last spring due to a set of TR21Bs magically appearing on my porch one day from my buddy who had a great connection there.  

 

Never cleaned the rust off of them, just dipped them in acetone to take out the "sunset" paint fill and then put the blue paint fill on them.

 

I never really did anything to them except wipe them off if they had a bunch of dirt on them to be honest.  Apparently my last round with them wasn't that great since I didn't even clean them before putting them in the garage.

798B6771-DCDF-4895-BCEF-ADCAA4EB1605.heic 7EC7F29B-79A6-47B3-97D0-96B75923971F.heic 59BD8181-0923-44C0-869C-837ACC71458C.heic

  • Like 3

WITB:
Driver: Taylormade SIM 2  
3W: Honma TR21  
4-6: Honma TR-21V  

7-10: Honma TR21B  
52*: Vokey 52F
58*: Vokey 58D
64*: Vokey 64M (62 bent to 64)
Putter: Depends on the day and which ones are in time out
Ball: ProV1x

Link to comment
Share on other sites

7 hours ago, seasuks said:

 

Current pics of same clubs after redoing the ferrules and paint fill in the summer of 2020.  They've sat in the garage since last spring due to a set of TR21Bs magically appearing on my porch one day from my buddy who had a great connection there.  

 

Never cleaned the rust off of them, just dipped them in acetone to take out the "sunset" paint fill and then put the blue paint fill on them.

 

I never really did anything to them except wipe them off if they had a bunch of dirt on them to be honest.  Apparently my last round with them wasn't that great since I didn't even clean them before putting them in the garage.

798B6771-DCDF-4895-BCEF-ADCAA4EB1605.heic 3.33 MB · 15 downloads 7EC7F29B-79A6-47B3-97D0-96B75923971F.heic 2.49 MB · 3 downloads 59BD8181-0923-44C0-869C-837ACC71458C.heic 3.6 MB · 3 downloads

 

Love them and the customization over time. What product did you use to blue? 

G425 Max 10.5* Diamana S LTD

G425 Max 16.5* Diamana 75 FW 

G425 Max 19* MMT 80 

Srixon ZX UT 23* MMT 90

Srixon ZX5 5-AW MMT 105

Cleveland CBX Zipcore 54/58 MMT 105 SW

Ping Kushin 4

 

 

WITB

Link to comment
Share on other sites

On 2/15/2022 at 4:18 AM, Russ757 said:

 

Love them and the customization over time. What product did you use to blue? 

https://smile.amazon.com/gp/product/B002J1N6YA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

  • Like 1

WITB:
Driver: Taylormade SIM 2  
3W: Honma TR21  
4-6: Honma TR-21V  

7-10: Honma TR21B  
52*: Vokey 52F
58*: Vokey 58D
64*: Vokey 64M (62 bent to 64)
Putter: Depends on the day and which ones are in time out
Ball: ProV1x

Link to comment
Share on other sites

On 2/13/2022 at 9:44 PM, seasuks said:

Don’t know if you e sent these off yet or not, but the MP29s are the one set I would not have stripped. They have a layer of copper between the nickel and chrome that made them one of the softest feeling irons of all time. 
 

I say that as a guy who loves Mizuno and played a set of raw MP33s until the grooves were gone and stripped his Honmas before he even hit them. Raw “feels” better/softer because the sound is more muted than the click of chrome and sound = feel which you can confirm by wearing headphones/ear plugs sometime when practicing. Muted sound = softer feel. Even Pinnacle range balls feel “softer” when you can’t hear the contact, IMO. 

 

 

Getting into a set of backup 745s. The wedge and 9 have a decent wear spot, potentially more so in the 9. Would these be a candidate for repair or raw? I'm going to start hoarding Srixons.

Link to comment
Share on other sites

9 hours ago, OrangeGravy said:

Did you by chance measure the CG of those blanks when you got them? I'm really wanting to do this and I'm curious where the CGs start at. Toe miss guy here and don't want to much work trying to move CG towards the middle/toe

I did actually and to start it was just slightly towards the heel. I took a lot off the toe to get my shape and then I worked the heel area pretty well to get the COG back to center. With less off the toe I think it would be easy to keep it center or slightly toe side. Here’s where mine finished 

6E5738B2-0F97-485F-BCEC-508B10FC73DB.jpeg

34779FDC-A987-4F66-957D-6165AD0BC506.jpeg

  • Like 1

COBRA LTDX LS 9* MATRIX MARU RED 70 TX 
COBRA FLY Z + 14.5* EVENFLOW BLACK 75 X                                                                             WILSON M5 TOUR 17* ALDILA ROGUE STIFF.                                           TITLEIST U510 3 ALDILA PHENOM 100 stiff.                                    

OICHI CUSTOM GROUND BLANKS 5-PW CATALYST 100 6.5                                    CALLAWAY JAWS FULL 54* MMT 125 Stiff.                                        CALLAWAY JAWS FULL 58* MMT 125 Stiff.                                         NATIONAL CUSTOM NICOLL BLADE SNELL MTB-X

 

 

Link to comment
Share on other sites

On 2/10/2022 at 5:36 AM, mogc60 said:

Here are the iron blanks I’ve been grinding into shape. I was going to plum brown finish these but after running them through a tumbler the finish turned out so good I’m just going to leave them and try to keep rust in check by adding barricade rust preventer on a regular basis. 

8B320D91-5FB6-45CA-B0B9-3C895F1B20BC.jpeg

9A41A7A4-5FBF-4A62-932C-BC10F298204A.jpeg

D0977DAB-3117-4A1E-9930-2EBE5F4E194E.jpeg

9252FAE1-1191-48B5-84CD-2DD9F75A872C.jpeg

0F4E9780-177D-42F4-8C16-D4DDBCB3A906.jpeg

2C8857BB-4937-4792-A808-B5D77D745983.jpeg

Love where you stamped the number back by the heel, very cool look

  • Thanks 1
Link to comment
Share on other sites

11 hours ago, mogc60 said:

I did actually and to start it was just slightly towards the heel. I took a lot off the toe to get my shape and then I worked the heel area pretty well to get the COG back to center. With less off the toe I think it would be easy to keep it center or slightly toe side. Here’s where mine finished 

6E5738B2-0F97-485F-BCEC-508B10FC73DB.jpeg

34779FDC-A987-4F66-957D-6165AD0BC506.jpeg

Brilliant.  Thanks! That should be manageable for me. Im thinking a bit longer blade but similar square toe. 

I emailed TS, but they didn't have numbers for the initial CG location 

Link to comment
Share on other sites

On 2/24/2022 at 8:35 PM, eht8266 said:

 

 

Getting into a set of backup 745s. The wedge and 9 have a decent wear spot, potentially more so in the 9. Would these be a candidate for repair or raw? I'm going to start hoarding Srixons.

A lot of what appears to be sweet spot wear or browning is just in the chrome, so yeah, stripping the chrome certainly helps.  You can also be more aggressive about sanding/filing/grinding out dings and gouges with a raw finish than with chrome.

Link to comment
Share on other sites

3 hours ago, jmck said:

A lot of what appears to be sweet spot wear or browning is just in the chrome, so yeah, stripping the chrome certainly helps.  You can also be more aggressive about sanding/filing/grinding out dings and gouges with a raw finish than with chrome.

 

Thanks - it sounds like playing with them as is, could be an option too... since they'll be a backup, I can think about it. That said - the raw idea really sounds interesting. And from all the pics here, it's really enticing.

Link to comment
Share on other sites

On 2/13/2022 at 9:12 AM, jmck said:

Needed another iron set like I need another hole in my head, but hey, you know how it goes, couldn't resist these beauties.

 

spacer.png

 

spacer.png

 

spacer.png

 

spacer.png

These look awesome. I just picked up a set of MP-53 and have considered doing this. Is this a DIY or did you have someone else do them? Love the ferrules. 

  • Like 1
Link to comment
Share on other sites

5 hours ago, Soccerrick10 said:


That’s for sure!  Mine arrived at their shop two weeks ago today and it’s everything I can do not to send an email to ask on their status 😀

 

I think he might be backed up. Started chatting abt mid Jan. Estimated turn around time was 2 weeks. Sent them off and he confirmed arrival 9 Feb. 

 

Crickets. 

 

Emailed 22 Feb just to see if it started or had if there were any questions.. 

 

Crickets 

 

Sent another Mar 1 just asking if they've started  

 

Finally got a response that they should be done today 4 Mar, and that I'd be notified through Pp...

 

 

His work stands for itself, but was kinda.. Not sure word but didn't enjoy the silence. Mostly because during the back and forth, emails were always returned within hours. 

 

I have another project set on the bench that I planned on sending once this build was complete. But gonna see how this all shakes out. 

 

I'll update once if I get anything today. 

G425 Max 10.5* Diamana S LTD

G425 Max 16.5* Diamana 75 FW 

G425 Max 19* MMT 80 

Srixon ZX UT 23* MMT 90

Srixon ZX5 5-AW MMT 105

Cleveland CBX Zipcore 54/58 MMT 105 SW

Ping Kushin 4

 

 

WITB

Link to comment
Share on other sites

On 2/12/2022 at 12:20 PM, mogc60 said:

Tourspec golf out of Japan 

Are these the Oichi blanks on the TS site? Your set looks awesome, love the unique heel shape! Curious how the feel / forgiveness is, and how much time you spent on the custom grinds? Think I may grab a set of these or the Kyoei blanks to mess around with.

Link to comment
Share on other sites

6 hours ago, Russ757 said:

 

I think he might be backed up. Started chatting abt mid Jan. Estimated turn around time was 2 weeks. Sent them off and he confirmed arrival 9 Feb. 

 

Crickets. 

 

Emailed 22 Feb just to see if it started or had if there were any questions.. 

 

Crickets 

 

Sent another Mar 1 just asking if they've started  

 

Finally got a response that they should be done today 4 Mar, and that I'd be notified through Pp...

 

 

His work stands for itself, but was kinda.. Not sure word but didn't enjoy the silence. Mostly because during the back and forth, emails were always returned within hours. 

 

I have another project set on the bench that I planned on sending once this build was complete. But gonna see how this all shakes out. 

 

I'll update once if I get anything today. 

I'm in the same boat. Sent mine in beginning of February and still hadn't heard anything even after emailing him. Ended up calling yesterday to make sure he even had them.

 

He knew my order and said he had gotten my emails but hadn't had time to respond. He also said he has gotten a lot of heads in recently, thanks to us I assume, and that he would get to them as soon as he could.

 

If you need an update then calling him is going to be the best way to get a response, but it is still going to take some patience. There is still a foot of snow here in Minnesota so I'm not in too much of a rush, but I'm still excited to see how they come out!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Our picks

    • 2022 Hero World Challenge - Discussion and Links
      Please put questions or comments here
       
       
       
       
       
      General Albums
       
      2022 Hero World Challenge – Tuesday Pt. 1
       
       
       
       
      WITB Albums
       
      Collin Morikawa WITB (New "P-7CM" proto irons) – 2022 Hero World Challenge
      Justin Thomas WITB – 2022 Hero World Challenge
       
       
       
      Pullout Albums
       
      Albany Bahamas (Front Nine course tour) – 2022 Hero World Challenge
      Albany Bahamas (Back Nine course tour) – 2022 Hero World Challenge
      Tiger Woods (Press conference, Rolex watch, and "Hero Shot" Challenge) – 2022 Hero World Challenge
      Corey Conners new Ping G430 LST driver – 2022 Hero World Challenge
      Tony Finau's custom Utah Jazz staff bag – 2022 Hero World Challenge
       
       
      • 3 replies
    • 2022 RSM Classic - Discussion and Links
      Please put and questions or comments here
       
       
       
      General Albums
       
      2022 RSM Classic - Monday #1
      2022 RSM Classic - Monday #2
      2022 RSM Classic - Monday #3
       
       
       
       
       
      WITB Albums
       
      Matt Wallace - WITB - 2022 RSM Classic
      Erik Barnes - WITB - 2022 RSM Classic
      Spencer Ralston - WITB - 2022 RSM Classic
      Palmer Jackson - WITB - 2022 RSM Classic
      Scott Harrington - WITB - 2022 RSM Classic
      Kyle Westmoreland - WITB - 2022 RSM Classic
       
       
       
       
      Pullout Albums
       
      Nick Hardy's custom Swag putter - 2022 RSM Classic
       
       
       
        • Like
      • 19 replies
    • 2022 Cadence Bank Houston Open - Discussion and Links
      Please put any questions or comments here
       
       
      General Albums
       
      2022 Cadence Bank Houston Open - Monday #1
      2022 Cadence Bank Houston Open - Monday #2
       
       
       
      WITB Albums
       
      Johannes Veerman - WITB - 2022 Cadence Bank Houston Open
      Richy Werenski - WITB - 2022 Cadence Bank Houston Open
      Danny Lee - WITB - 2022 Cadence Bank Houston Open
      Ben Kern - So. Texas PGA Section Champ - WITB - 2022 Cadence Bank Houston Open
      Justin Rose (mini WTB) custom JR irons - 2022 Cadence Bank Houston Open
       
       
      Pullout Albums
       
      Carson Young's custom Cameron - 2022 Cadence Bank Houston Open
      New Mitsubishi Tensei K series shaft - 2022 Cadence Bank Houston Open
      Cameron putter - 2022 Cadence Bank Houston Open
      Garrick Higgo’s custom Cameron - 2022 Cadence Bank Houston Open
      Tyler Duncan's custom Cameron putter - 2022 Cadence Bank Houston Open
      New Super Stroke Zenergy grips - 2022 Cadence Bank Houston Open
       
       
       
       
        • Haha
      • 8 replies
    • The 2022 CJ Cup at Congaree Golf Club – Discussion Thread
      General Galleries
       
      The 2022 CJ Cup – Tuesday Pt. 1 The 2022 CJ Cup – Wednesday Pt. 1  
      WITB
       
      Tommy Fleetwood WITB Shane Lowry WITB – 2022 CJ Cup  
       
       
      Pullout Threads
       
      Scottie Scheffler's custom Scotty Cameron mallet putter Kevin Kisner's new Callaway Apex TCB irons (w/ Nippon prototype shafts) Congaree hole-by-hole walking tour (hole Nos. 1-11, and 18) New Bettinardi Hexperimental Proto mallet putters – 2022 CJ Cup Tommy Fleetwood's custom Scotty Cameron Buttonback Masterful putter – 2022 CJ Cup New Srixon ZX5 MKII irons, and ZX MKII utility – 2022 CJ Cup Cameron Young's new Titleist TSR2+ 3-wood, TSR2 5-wood, SuperStroke putter grip – 2022 CJ Cup LA Golf P-Series 135 "Tom Kim" backup putter shafts – 2022 CJ Cup New Srixon ZX MKII fairway wood – 2022 CJ Cup  
       
       
       
        • Like
      • 4 replies
    • Ping G430 LST and Max drivers, G430 Max fairway wood & G430 hybrid  – 2022 Shriners Children's Open
      Ping G430 LST and Max drivers, Ping G430 Max fairway wood – 2022 Shriners Children's Open
        • Haha
        • Like
      • 665 replies

×
×
  • Create New...