Jump to content

Sub 70 Clubs


apex17

Recommended Posts

3 hours ago, bryanwmilburn said:

Looking like I'll be ordering a set of Sub70 699 Pro in the near future. Not that the prices are high (at all), but just curious - does Sub70 run any sort of Black Friday deals at all? I'll be buying regardless but just wondering if I should hold off (no rush) 🙂

 

I'd take the plunge as soon as possible to make sure you can get the components (shaft, grip, etc) you want. Supply chains are going to get really jacked over the next couple of months as Christmas orders take over everything.

  • Like 2
Link to comment
Share on other sites

Has anyone ordered their Sub70 irons with weaker lofts. I have been fanboying the site since the Canadian one launched. The only thing I'm not liking is the stronger lofts mainly the 639CB. Going two stronger than my current setup deters me as my lofts have been what they are for 15 years. 

From a Design standpoint would a 2* weakening change what they are designing.

  • Like 2
Link to comment
Share on other sites

7 hours ago, golfinrig24 said:

Has anyone ordered their Sub70 irons with weaker lofts. I have been fanboying the site since the Canadian one launched. The only thing I'm not liking is the stronger lofts mainly the 639CB. Going two stronger than my current setup deters me as my lofts have been what they are for 15 years. 

From a Design standpoint would a 2* weakening change what they are designing.


Going two weak won’t impact the performance, but it will open the club face slightly. If you are ok with that, then it wouldn’t be a problem 

  • Like 2
Link to comment
Share on other sites

18 hours ago, golfinrig24 said:

Has anyone ordered their Sub70 irons with weaker lofts. I have been fanboying the site since the Canadian one launched. The only thing I'm not liking is the stronger lofts mainly the 639CB. Going two stronger than my current setup deters me as my lofts have been what they are for 15 years. 

From a Design standpoint would a 2* weakening change what they are designing.


i have done this several times. Two degrees is well within range of reasonable adjustability. Only thing it affects is spin and distance, does not hurt playability. 

  • Like 2
Link to comment
Share on other sites

43 minutes ago, Liveonce said:

@JaySub70

 

curious as to why the standard lie is 72* when most manufacturers are 70*? 
 

going to order shortly and debating if I should have the lie altered or not…

 

thanks!

There is no std lie among manufacturers. And why would you debate having the lie altered? Choose the lie that works for your stroke.

Link to comment
Share on other sites

On 10/17/2021 at 7:38 AM, DHoch said:

Not clubs related, but are there any previews or info available about the stand bags that should be back in stock soon? Number of full length dividers, etc?

 

Our next batch will be the same as the ones we had earlier this year...you can find more info at https://www.golfsub70.com/sub-70-golf-stand-bag-black-white-885.html  There is also a gray version

Link to comment
Share on other sites

On 10/18/2021 at 11:45 AM, JaySub70 said:

 

Our next batch will be the same as the ones we had earlier this year...you can find more info at https://www.golfsub70.com/sub-70-golf-stand-bag-black-white-885.html  There is also a gray version

I actually just sent your support team an email, then found you on here. If I order a custom set of 699 pro and want bb&f ferrules would I be able to purchase them and send them in for my build? Assuming they need to be put on when the irons are shafted ( I don't know much about that)

  • Like 1
Link to comment
Share on other sites

6 hours ago, eball33 said:

I actually just sent your support team an email, then found you on here. If I order a custom set of 699 pro and want bb&f ferrules would I be able to purchase them and send them in for my build? Assuming they need to be put on when the irons are shafted ( I don't know much about that)

 

No worries! I think I replied via social media as well...but yeah that shouldn't be an issue. I'd just coordinate it with our customer support team to make sure it gets taken care of

Link to comment
Share on other sites

On 10/6/2021 at 5:55 PM, golfinrig24 said:

Has anyone ordered their Sub70 irons with weaker lofts. I have been fanboying the site since the Canadian one launched. The only thing I'm not liking is the stronger lofts mainly the 639CB. Going two stronger than my current setup deters me as my lofts have been what they are for 15 years. 

From a Design standpoint would a 2* weakening change what they are designing.

Did it with the 639 MB CB split combo,

 

I wanted them Modern MB lofts, so starting 46, 42, 38 etc.  They weakened them to my specs and helped a touch with the offset.  Unfortunately the offset was still not my preferred cup of tea so I have moved to the 649mbs.  They are already modern MB lofts 46* PW starting.

 

So yes they surely can do it and 2* from the specs builders point of view said not a problem! 

  • Like 1

Cobra SZ - Rogue 60s
TM 15* M2v1 - RIP Phenom 60S
TM 18* M2v1 - Rogue 60S
Sub70- 649mbs-PW-6 ,639 CBs-5-4   PX 6.0 Rifles
Vokey SM7 - 50*/8*, 56*/10* & 60*/8* S200
Scotty Newport 2 - 33"

Link to comment
Share on other sites

On 8/11/2021 at 11:29 AM, 13ITZ said:

I also have a grand plan for my bag and will wait until the 699 Pro comes in LH next year to build a combo set with the 5,7,9. Ordered the 286 wedge today in 46* to start on the bottom end gapping.

 

Said I'd wait until next year, but received my 699 5i - 9i today. 3 weeks to the day of order which was nice. Had the lofts weakened a bit for consistent gapping through the set. Decided not to (i.e. didn't want to) wait for the LH 699 Pro and will hope to add the 699U 4i if it comes in LH next year. Had a chance to go the range this afternoon and look forward to playing them.

 

RE: Ferrules

My personal experience, I was told BB&F ferrules could not be sent in and added to the order. However, they do offer a solid selection of custom ferrules in house if that interests you. Posted a pic in the Recent Purchase thread of an option that came out classy.

  • Like 2
Link to comment
Share on other sites

18 hours ago, JaySub70 said:

 

No worries! I think I replied via social media as well...but yeah that shouldn't be an issue. I'd just coordinate it with our customer support team to make sure it gets taken care of

HaHa! @JaySub70, that was me who asked you about the BBF's via Insta yesterday!  🙂

  • Like 1

Cally Epic Flash D
Cally Epic Flash 5w (Old school - TM 15* Tour Burner FlexTwist Titanium Shaft)

MacGregor CB92, DG115, 4-SW or BeCu Eye2's 3-SW, zz65 

BeCu Zing2

Link to comment
Share on other sites

On 10/19/2021 at 8:14 PM, JaySub70 said:

 

No worries! I think I replied via social media as well...but yeah that shouldn't be an issue. I'd just coordinate it with our customer support team to make sure it gets taken care of

 

On 10/19/2021 at 8:14 PM, JaySub70 said:

 

No worries! I think I replied via social media as well...but yeah that shouldn't be an issue. I'd just coordinate it with our customer support team to make sure it gets taken care of

Interestingly I was in an email conversation with a well known clubmaker to various forums members (and general good guy) the other day regarding your sticks. He owned a Sub 70 wedge and after our exchange proceeded to order a combo set from you. I have conversed with the guy for years and trust his judgement. I am simply debating my 699/699 pro,or combo option. Kind of funny he ordered right  after we talked. Sure you know who I am referring to but don't find it proper to mention here n open forum. Anyway your welcome,LOL.

  • Like 1
Link to comment
Share on other sites

18 hours ago, tomc262 said:

HaHa! @JaySub70, that was me who asked you about the BBF's via Insta yesterday!  🙂

 

Well it sounds like our policy on that may have changed.  I know we had done it in the past...but it does put some pressure on our assembly team when they're working with a set of ferrules that someone else bought from a third party.  If they have any issue installing or turning them then we'd feel terrible

 

25 minutes ago, hardten said:

 

Interestingly I was in an email conversation with a well known clubmaker to various forums members (and general good guy) the other day regarding your sticks. He owned a Sub 70 wedge and after our exchange proceeded to order a combo set from you. I have conversed with the guy for years and trust his judgement. I am simply debating my 699/699 pro,or combo option. Kind of funny he ordered right  after we talked. Sure you know who I am referring to but don't find it proper to mention here n open forum. Anyway your welcome,LOL.

 

I think I have a decent idea who you are referring to haha...but our CEO Jason probably worked with him directly.  Thanks for discussing Sub 70 with him further!  If you ever have any questions just let us know

Link to comment
Share on other sites

Also are you able to get the utilities with kbs proto or Ventus hyb shafts?

  • Like 1

Driver: Callaway Epic Max LS with Hzrdus RDX Blue 70g 6.0 

2H: Callaway Super Hybrid with Tensei Orange Pro Hyb 80 Stiff 

3H: Sub70 939X UST proforce V2 black F5 hybrid soft stepped XStiff 

4-AW: PXG OG 0211  with KBS Tour Stiff 2.5* up 1/4" long 

Wedges: Cleveland Zipcore 54 Full/58 Mid (Backup 54*,60*: Ping S Tour KBS Tour Stiff 3* up)

Putter: Putter: TAII #2  

Ball: Snell MTB-X

Tracked by Arccos

 

Link to comment
Share on other sites

On 10/12/2021 at 8:10 PM, tucker_jct said:

The new Sub 70 Forged Raw TAIII irons 4-AW arrived today to take their place in my bag.   Lots of extras included in the box thanks to @JaySub70 and thanks to Jason and Cody for the quick turnaround -  2 weeks from order to delivery.

Dynamic Gold 105 R300,  1* upright, Midsize Golf Pride MCC Plus 4 Align 

 

some pictures of the unboxing: 

 

20211012_172826.jpg

20211012_172843.jpg

20211012_172849.jpg

20211012_172912.jpg

20211012_172936.jpg

20211012_172953.jpg

20211012_173344.jpg

20211012_173424.jpg

20211012_173452.jpg

20211012_173820.jpg

20211012_173838.jpg

20211012_174115.jpg

20211012_174119.jpg

20211012_175546.jpg

20211012_175622.jpg

Those TA3’s are so gorgeous! I wish I had the game to hit them.

  • Like 1
Link to comment
Share on other sites

That's correct on the question above...it sticks to your phone or phone case and allows you to put your ID, credit cards, etc in there so that you don't need to have your entire wallet all the time

 

We can do the Ventus HB shafts in utilities and the KBS Proto shouldn't be an issue...not 100% sure if we have any of those in stock or if KBS even does at the moment

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   1 member

  • Our picks

    • 2021 RSM Classic - Discussion and Links
      2021 RSM Classic - Monday
      2021 RSM Classic - Tuesday #1
      2021 RSM Classic - Tuesday #2
       
       
      Trey Mullinax - WITB - 2021 RSM Classic
      Brett Drewitt - WITB - 2021 RSM Classic
      Matt Wallace - WITB - 2021 RSM Classic
      Josh Creel - WITB - 2021 RSM Classic
      Ben Crane - WITB - 2021 RSM Classic
      Justin Lower - WITB - 2021 RSM Classic
      Adam Svensson - WITB - 2021 RSM Classic
      Brendon Todd - WITB - 2021 RSM Classic
      Webb Simpson - WITB - 2021 RSM Classic
      Chesson Hadley - WITB - 2021 RSM Classic
      Kiradech Aphibarnrat - WITB - 2021 RSM Classic
      Bill Haas - WITB - 2021 RSM Classic
      Max Homa - WITB - 2021 RSM Classic
      Nick Watney - WITB - 2021 RSM Classic
       
       
      New Odyssey Tri Hot putters - 2021 RSM Classic
       
       
       
       
      • 2 replies
    • 2021 Hewlett Packard Enterprise Houston Open - Discussion & Links
      Please put any questions or comments here
       
      Pat Perez - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Tony Finau - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Kramer Hickok - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Paul Barjon - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Nate Lashley - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Seamus Powers - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Dylan Frittelli - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      C.T. Pan - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Chase Koepka - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Branden Grace - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Marc Leishman - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Martin Laird - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Shane Lowery - WITB - @ 2021 Hewlett Packard Enterprise Houston Open
       
      Cameron CT T-11 putter - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      New Graphite Design shafts - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Cameron cover from 2021 ZOZO Championship - @ 2021 Hewlett Packard Enterprise Houston Open
      Bettinardi covers - @ 2021 Hewlett Packard Enterprise Houston Open
      Cameron CT putters - @ 2021 Hewlett Packard Enterprise Houston Open
       
       
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #1
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #2
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #3
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #4
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #1
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #2
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #3
       
       
       
       
      • 1 reply
    • APPLY NOW: L.A.B. Golf MEZZ.1 Putter (Early Access) Member Testing! 10 Testers Needed!
      L.A.B. Golf is choosing ten GolfWRX members to receive their MEZZ.1 putter early and put their brand new product to the test before reporting back to the community about what they see. The selected testers will be one of the first to experience the MEZZ.1 from L.A.B. GOLF, their newest Lie Angle Balanced design, ahead of it's January 2022 launch!
       
      About The L.A.B. Golf Mezz.1 Putter
      MEZZ.1 is our new mid-mallet putter that’s fully CNC machined from a billet of 6061 aircraft aluminum (body) and 303 stainless steel (midsection) to create our best-feeling — and we think best looking — putter to date. It includes 10 weights (eight on the bottom, two on the sides) that allow us to individually build each putter to a golfer’s exact specifications.
       
      How To Apply
      In a post below, answer the following questions.
       
      1. City, State?
      2. Handicap?
      3. What is your current putter?
      4. Have you ever used a L.A.B. Golf putter?
      5. Why do you want to review the MEAZZ.1 putter?
      6. Do you agree to participate in an ongoing testing thread, posting reviews and photos?
       
      That's it! @labgolf and GolfWRX will choose the testers in about 2 weeks! This testing event is for good-standing members in the USA only!
       
        • Thanks
        • Like
      • 435 replies
    • 2021 CJ Cup at The Summit Club - Discussion and Links
      Please put any questions or comments here
       
       
      2021 CJ Cup at The Summit Club - Tuesday #1
      2021 CJ Cup at The Summit Club - Tuesday #2
       
       
      Adam Scott - WITB - 2021 CJ Cup at The Summit Club
      Justin Rose - WITB - 2021 CJ Cup at The Summit Club
      Collin Morikawa - WITB - 2021 CJ Cup at The Summit Club
      Jason Day - WITB - 2021 CJ Cup at The Summit Club
      Justin Thomas - WITB - 2021 CJ Cup @ The Summit Club
      Erik Van Rooyen - WITB - 2021 CJ Cup @ The Summit Club
      Matt Jones - WITB - 2021 CJ Cup at The Summit Club
      Cam Davis - WITB - 2021 CJ Cup at The Summit Club
      Cam Smith - WITB - 2021 CJ Cup at The Summit Club
      Byeong Hun An - WITB - 2021 CJ Cup at The Summit Club
      Min Kyu - WITB - 2021 CJ Cup at The Summit Club
      Joohyung Kim - WITB - 2021 CJ Cup @ The Summit Club
      Tommy Fleetwood - WITB - 2021 CJ Cup @ The Summit Club
      Jordan Spieth - WITB - 2021 CJ Cup @ The Summit Club
      Lucas Glover - WITB - 2021 CJ Cup @ The Summit Club
      Keegan Bradley - WITB - 2021 CJ Cup @ The Summit Club
       
       
       
      Gary Woodland's new Cameron putter - 2021 CJ Cup @ The Summit Club
      Kevin Na's new Odyssey/Toulon putter - 2021 CJ Cup @ The Summit Club
      Jucie wedges & Proto irons - 2021 CJ Cup at The Summit Club
       
       
       
       
      • 6 replies
    • 2021 Shriners Hospitals for Children Open WITB Photos- Discussion & Links
      Please put any questions or comments here...
       
      Links:
       
      Harry Higgs - WITB - 2021 Shriners Hospitals for Children Open
      Ian Poulter - WITB - 2021 Shriners Hospitals for Children Open
      Corey Conners - WITB - 2021 Shriners Hospitals for Children Open
      Harry Higgs - WITB - 2021 Shriners Hospitals for Children Open
      Matt NeSmith - WITB - 2021 Shriners Hospitals for Children Open
      Doug Ghim - WITB - 2021 Shriners Hospitals for Children Open
      New Cameron Las Vegas covers - 2021 Shriners Hospitals for Children Open
      New Project X HZRDUS Smoke RDX shafts - 2021 Shriners Hospitals doe Children Open
       
       

       
        • Like
      • 15 replies

×
×
  • Create New...