Jump to content

Recommended Posts

I have recently tried this shaft and thought it felt great. I am strongly thinking about getting a set with this shaft. I wanted to get the opinions of those that play it. Especially if you are a stronger player. Thanks.

Driver: Titleist TSi3 Ventus blue 6x

3 wood: Titleist Tsi2 15 Ventus blue 7x

& Wood: Titleist TSi2 Ventus Red 9X
Taylormade Gapr low 2 ventus blue 9x
4-PW Cobra king forged CB KBS $ Taper 130 X flex
Wedges 50, 54, 60 Cleveland ZIPCORE
PUTTER; LAB DF2.1
BALL; Bridgestone BX, OR Taylomade TP5x PIX

Link to post
Share on other sites
  • Replies 35
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

I tried these at a fitting with Club Champion, fitter recommended the C-Tapper lite over the $-tapper do to the lower spin on the $-tappers. I went with my gut and put a set into my Apex forged and lo

I had modus 105s in my i210s. I was fit for PX 6s and $ tapers. The PX feel more board like and the feel isn’t quite as good. I went for the $ tapers based on that. They have knocked my spin and fligh

Stiff. Swing my driver about 110-112. 7 iron is 88-90. Stiff was plenty. I was looking for a shaft to tighten my dispersion, reduce spin and height, and help my tempo

I went in to get fitted specifically for iron shafts last year, and the $ taper was, by far, the best shaft I hit. And I hit them ALL. I've been playing them for about half a year now and love them. I used to play the KBS Tour, which I liked a lot for the feel but didn't love the trajectory. The $ taper gives me that same feel, but much better flight. Really stable feeling while also feeling soft. I've hit some roped iron shots this season that have held their line and went exactly where I was aiming. Just for reference, my average swing speed with a 6i is 90.

Link to post
Share on other sites

Interested in these shafts as well. I tend to get steep and have high launch high spin and need something to help me lower my flight. My 7i swing speed is same, 89-91. Currently playing modus 120s. Like the weight, but getting really high launch.

Titleist  TSi3 9* Oban Hashimoto LTD 65 04

Titleist TS3 15* Diamana S+ ltd Blueboard 70s tipped 1" 

Titleist U500 2i Fujikura Motore Speeder Tour Spec 9.8 hb

Callaway  18 X Forged UT 4i  Accra iCWT 105

Wilson Staff   CB 5-pw  Nippon Modus 125 stiff

National Custom Works   50, 53, 58  DG TI s400 Black Onyx

Cushman Custom   C&C 1.0 Welded Hex Flow Neck  KBS CT Tour Matte Black, Lamkin Deep Etch Full Cord

Bridgestone Tour B XS

Link to post
Share on other sites

Thanks, I am looking for those that would fit in the X flex range. Sounds like you would be there. I have been playing DG AMT whites in X flex and i am just not sure we get along all that well. The ascending mass thing may be a miss for me.

Driver: Titleist TSi3 Ventus blue 6x

3 wood: Titleist Tsi2 15 Ventus blue 7x

& Wood: Titleist TSi2 Ventus Red 9X
Taylormade Gapr low 2 ventus blue 9x
4-PW Cobra king forged CB KBS $ Taper 130 X flex
Wedges 50, 54, 60 Cleveland ZIPCORE
PUTTER; LAB DF2.1
BALL; Bridgestone BX, OR Taylomade TP5x PIX

Link to post
Share on other sites

> @QuigleyDU said:

> I have recently tried this shaft and thought it felt great. I am strongly thinking about getting a set with this shaft. I wanted to get the opinions of those that play it. Especially if you are a stronger player. Thanks.

 

Similar SS to "2me". Played them for a while in the Rogue Pro. Not bad but not for me.

 

Have tried them on another iron head as well. Feel is a bit more stout than the DGS300 I have. Also "feel" a bit heavier than my DGS as well (but they're not). Similar to the C-Tapers which I had for a while.

 

According to the LM they seem to kill a fair bit of spin,,,,,,, so for a high spin player that wants to bring their spin down a bit they're certainly worth a try.

Want more posters to read and reply ? "[EMBRACE] THE LINE BREAK"

 

Callaway Epic Flash SZ Triple Diamond 9.0 Tour AD TP-6 Stiff

Ping G400 hybrid, 19*, 70 gr Stock Stiff

Ping G20, 5-PW, DGS300

Ping Glide Forged, 48, 52, 60, DGS300

Vokey SM8 56/08 (Thanks WRX !!!)

Seemore MT7 Face Balanced (Today)

Chrome Soft Truvis Yellow/Black

Link to post
Share on other sites

I'm actually playing the $ taper in stiff. I didn't try an X as I typically don't get along with them....I feel like I have to swing out of my shoes....it's a mental thing for sure. For what it's worth, I did hit the C taper lite in X. Got comparable numbers with that shaft and the $ taper. The C taper was my second favorite shaft that I hit.

Link to post
Share on other sites

> @nsxguy said:

> > @QuigleyDU said:

> > I have recently tried this shaft and thought it felt great. I am strongly thinking about getting a set with this shaft. I wanted to get the opinions of those that play it. Especially if you are a stronger player. Thanks.

>

> Similar SS to "2me". Played them for a while in the Rogue Pro. Not bad but not for me.

>

> Have tried them on another iron head as well. Feel is a bit more stout than the DGS300 I have. Also "feel" a bit heavier than my DGS as well (but they're not). Similar to the C-Tapers which I had for a while.

>

> According to the LM they seem to kill a fair bit of spin,,,,,,, so for a high spin player that wants to bring their spin down a bit they're certainly worth a try.

 

Thanks. Spin killing may be a need.

Driver: Titleist TSi3 Ventus blue 6x

3 wood: Titleist Tsi2 15 Ventus blue 7x

& Wood: Titleist TSi2 Ventus Red 9X
Taylormade Gapr low 2 ventus blue 9x
4-PW Cobra king forged CB KBS $ Taper 130 X flex
Wedges 50, 54, 60 Cleveland ZIPCORE
PUTTER; LAB DF2.1
BALL; Bridgestone BX, OR Taylomade TP5x PIX

Link to post
Share on other sites

I tested them at Club Champion and they felt great... a bit heavier in the hands and certainly lower spin, about 500 rpms. My launch was about half a degree or so higher on average... forget the trackman numbers. I gained about 7 yards of carry and was hitting my 6 ~200+ carry with them and they rolled about 10 yards. I was playing standard x100s before hand.

 

The money tapers are great shafts for sure. They felt great in 130x and kill spin. Are they worth the $55 a shaft or whatever? I'm on the fence on that, chose to stick with X100s since I know the feel and can shape them a bit easier. Also, the data set is so small that I don't truly feel like the dispersion increase was there.

Have you tried normal x100s and not the AMT? If you are a stronger player, you can certainly handle those. I have heard mixed things about the AMT, but i do know that heavier gets along with me better.

Link to post
Share on other sites

> @gricky said:

> I tested them at Club Champion and they felt great... a bit heavier in the hands and certainly lower spin, about 500 rpms. My launch was about half a degree or so higher on average... forget the trackman numbers. I gained about 7 yards of carry and was hitting my 6 ~200+ carry with them and they rolled about 10 yards. I was playing standard x100s before hand.

>

> The money tapers are great shafts for sure. They felt great in 130x and kill spin. Are they worth the $55 a shaft or whatever? I'm on the fence on that, chose to stick with X100s since I know the feel and can shape them a bit easier. Also, the data set is so small that I don't truly feel like the dispersion increase was there.

> Have you tried normal x100s and not the AMT? If you are a stronger player, you can certainly handle those. I have heard mixed things about the AMT, but i do know that heavier gets along with me better.

 

I played the standard X100 for years. I know they are good. The AMT shafts I think are good, but I just do not seem to be consistent with them especially the longer lighter irons.

Driver: Titleist TSi3 Ventus blue 6x

3 wood: Titleist Tsi2 15 Ventus blue 7x

& Wood: Titleist TSi2 Ventus Red 9X
Taylormade Gapr low 2 ventus blue 9x
4-PW Cobra king forged CB KBS $ Taper 130 X flex
Wedges 50, 54, 60 Cleveland ZIPCORE
PUTTER; LAB DF2.1
BALL; Bridgestone BX, OR Taylomade TP5x PIX

Link to post
Share on other sites

I played X100s for years and then 6.5 rifle and have tried many shafts since my swingswing went down just slightly and I play a bit less. I am a plus handicap and former club pro. I put the $taper in S+ flex in play about a month ago and they are a very nice shaft. Solid but smooth and the ball flight is mid with controlled spin. I can flight these however I want and the balance and weight feel great. I am very happy with these. Its the first KBS shaft I’ve liked and that fit me.

SRIXON ZX5 9.5 MIYAZAKI MIZORE 60X.                                              SRIXON ZX 13.5 MIYAZAKI MIZORE 70X                                               SRIXON H85 16 MATRIX BLACKTIE 95 SRIXON Z FORGED 4-PW CATALYST 100 6.5                                   CLEVELAND RTX4 50* CATALYST 100 6.0                                        CLEVELAND RTX4 54* CATALYST 100 6.0                                         CLEVELAND RTX4 58* CATALYST 100 6.0.                                             SEEMORE mFGP20 PLATINUM 38” SNELL MTB-X

Link to post
Share on other sites

Swung the 120g $ Taper and it felt really nice, reminds me of modus 120.

Taylormade SIM Max 9* @9.75*- Ventus Black 6x

Taylormade Sim Ti @16.5* - Fujikura Pro 2.0 TS 8x (Testing Cobra F9 w/ Accra FX2.0 380 M5)

SIM Max 19* - HZRDUS SMOKE BLACK 90 6.5 (trialing Cobra Speedzone w/ Fujikura Pro 95X & Fujikura Pro 2.0 TS 8x)

Titleist 818H1 - Ventus Blue 10x

Cobra Forged Tec Black 6i, Forged CB 6-GW - AMT X100 Onyx

Titleist SM8 54.12D, 58.8M @59* - S400 Tour Issue Onyx

Compass Golf Co. Atwood (Newport 2 Timeless Tri sole clone)

TP5 (testing Vice Pro)

 

Link to post
Share on other sites

I really wanted to like these but the tour v 125 just gave me better numbers.

TM M6 9 GD Tour AD HD 6x
TM M6 15 GD Tour AD TP 7x
TM M6 18 GD Tour AD VR 8x
Ping I200, IBlade 4-P power spec Nippon SPO
Ping Glide 2.0 - 49ss, 55ws heel grind, 60ss wrx grind Nippon SPO
Byron Morgan DH89 SSS 350g KBS CT TOUR BLACK
Best Grips leather grips
Snell MTB-X yellow

Link to post
Share on other sites

I think as everyone is posting the feel is impeccable, it just comes down to how you release and if you spin is in check. I played PX for many years, Ctapers, and X100’s before that and never really loved any of them.

 

I seriously love these shafts and they’re flat out performing for me. Tight dispersion and a beautiful mid flight.

Link to post
Share on other sites

I was fitted for them in X flex, at a club champion, a few months back and they have been performing great so far. I was overspinning the ball, with the Project X LZ, and these brought my spin down to an acceptable level and lowered my ball flight a bit. To me, they play somewhat similar to the C-Taper, but with much better feel. They seem to do a great job keeping my dispersion in check as well. I highly recommend them.

Titleist TS3 9.5* w/Accra TZ5 65 X-Stiff
Titleist TS3 15* w/Fujikura Ventus 7X
Callaway Apex19 Hybrid 20* w/Accra TZ5 95X
Callaway Apex19 Hybrid 23* w/Accra TZ5 95X
Titleist 718 CB 5 iron w/KBS $Taper X-Stiff
Titleist 718 MB 6-PW w/KBS $Taper X-Stiff
Titleist SM7 Wedges 50*, 54*, 58* w/KBS $Taper X-Stiff
Bettinardi Queen B 10 34.5"
Titleist Pro V1 

Link to post
Share on other sites

Anyone playing these coming from Modus 120s? Need to lower my spin and launch and curious if anyone can compare. Like the feel of modus, but just not working out for me. Had some really good results in a fitting with project x 6.0, but not crazy about the feel. Wondering if these will be similar in performance.

Titleist  TSi3 9* Oban Hashimoto LTD 65 04

Titleist TS3 15* Diamana S+ ltd Blueboard 70s tipped 1" 

Titleist U500 2i Fujikura Motore Speeder Tour Spec 9.8 hb

Callaway  18 X Forged UT 4i  Accra iCWT 105

Wilson Staff   CB 5-pw  Nippon Modus 125 stiff

National Custom Works   50, 53, 58  DG TI s400 Black Onyx

Cushman Custom   C&C 1.0 Welded Hex Flow Neck  KBS CT Tour Matte Black, Lamkin Deep Etch Full Cord

Bridgestone Tour B XS

Link to post
Share on other sites

> @"Charles.eichman" said:

> Former C taper user who has dabbled with the $taper. I have always preffered the KBS C taper 130X but have always had the issue of bending them at the tip. Pulled my $tapers and the tips were bent on 4 different irons.

 

Wow. I had a 130x C-Taper bend too, and I was between going to try the $ tapers or back to X100s. I can't deal with the bending... that really freaks me out.

Link to post
Share on other sites

> @wam78 said:

> Anyone playing these coming from Modus 120s? Need to lower my spin and launch and curious if anyone can compare. Like the feel of modus, but just not working out for me. Had some really good results in a fitting with project x 6.0, but not crazy about the feel. Wondering if these will be similar in performance.

 

I don't game the $ Taper but I've hit them twice now while demo'ing irons. I'v ebeen in Modus 120 for a few years now and these felt right at home for me, and I'm fairly sensitive to big changes in profile.

 

Don't get caught up in flex designations though. The X flex on modus 120 plays very similar in feel to the 120g $ taper, which is labeled as S flex by KBS. If you just went from X to X, you'll be adding 10g of weight approximately, which will likely affect your swing and your resulting ball flight. I could maybe see going to S+ if I wanted a touch more firmer feel without adding too much mass.

Taylormade SIM Max 9* @9.75*- Ventus Black 6x

Taylormade Sim Ti @16.5* - Fujikura Pro 2.0 TS 8x (Testing Cobra F9 w/ Accra FX2.0 380 M5)

SIM Max 19* - HZRDUS SMOKE BLACK 90 6.5 (trialing Cobra Speedzone w/ Fujikura Pro 95X & Fujikura Pro 2.0 TS 8x)

Titleist 818H1 - Ventus Blue 10x

Cobra Forged Tec Black 6i, Forged CB 6-GW - AMT X100 Onyx

Titleist SM8 54.12D, 58.8M @59* - S400 Tour Issue Onyx

Compass Golf Co. Atwood (Newport 2 Timeless Tri sole clone)

TP5 (testing Vice Pro)

 

Link to post
Share on other sites

> @wam78 said:

> Anyone playing these coming from Modus 120s? Need to lower my spin and launch and curious if anyone can compare. Like the feel of modus, but just not working out for me. Had some really good results in a fitting with project x 6.0, but not crazy about the feel. Wondering if these will be similar in performance.

 

I came from modus 120s. The $taper do play a little stiffer the same flex so I soft stepped my set to get them to play that way. I love them though. Great feel.

Twitter: @itsnotgriffin
Site: [url="http://www.thebottomgroove.com/"]www.thebottomgroove.com[/url]

WITB:
Callaway Big Bertha Epic 10.5
Callaway BBA 5 Wood
Callaway XR 7 Wood - Frankenstyle
Apex Hybrid 23deg
Apex Pro 5i-PW
MD3 52, 56 W-Grind
MD3 60 PM Grind
Odyssey O-Works - #1/3T (putter commitment issues)

Link to post
Share on other sites

The $ Tapers have great rapport and backing behind. I, personally, didn't care for them in feel (Stiff flex only used). I'd love to give them a try in the X flex. The KBS Tours in 130 are great and very similar to the X100s that I use. I've played C-Tapers, C-Taper Lites, Modus 120 and 130s and tried a couple Project Xs here and there. I just can't get away from the X100s.

Check it out though, trying a new ball with these shafts can totally change your perception of a shaft. I always mix and match balls / shaft combos with club heads when getting fit. It makes a huge difference.

Link to post
Share on other sites

> @"Charles.eichman" said:

> Former C taper user who has dabbled with the $taper. I have always preffered the KBS C taper 130X but have always had the issue of bending them at the tip. Pulled my $tapers and the tips were bent on 4 different irons.

 

That's disappointing..... Seems KBS quality control still isnt up to snuff

Link to post
Share on other sites

> @"Charles.eichman" said:

> Former C taper user who has dabbled with the $taper. I have always preffered the KBS C taper 130X but have always had the issue of bending them at the tip. Pulled my $tapers and the tips were bent on 4 different irons.

 

Just had a set of my $tapers replaced because Of the bent tip. It sucks to always be nervous of that occurring, but it’s their customer service that makes me keep using it.

Twitter: @itsnotgriffin
Site: [url="http://www.thebottomgroove.com/"]www.thebottomgroove.com[/url]

WITB:
Callaway Big Bertha Epic 10.5
Callaway BBA 5 Wood
Callaway XR 7 Wood - Frankenstyle
Apex Hybrid 23deg
Apex Pro 5i-PW
MD3 52, 56 W-Grind
MD3 60 PM Grind
Odyssey O-Works - #1/3T (putter commitment issues)

Link to post
Share on other sites

I tried these at a fitting with Club Champion, fitter recommended the C-Tapper lite over the $-tapper do to the lower spin on the $-tappers. I went with my gut and put a set into my Apex forged and love the flight and feel. The heavier weight allows the club to create a release that works for me. All shafts release differently for every swing, you will just have to test to see if they work for you. Plus for me is the added weight and trajectory control.

  • Like 1

Driver... Ping G410 w/ Hzrdus Yellow 63 gram-S
TM....Sim Max Ti 3 Wood w/ Hzrdus Green 70 gram -S
TM..Stage 2 w/Speeder HB-8-S

Srixon ZX w/i95  Steelfiber-S

Srixon ZX7 w/i95 Steelfiber -S 5-W
Vokey sm8 52*, 58* PM Grind
Scotty Cameron Big Sur Pro Platinum 
Ping Crazy-E lite 
Pro v1

Link to post
Share on other sites

There is some good info here. Thank you.

Driver: Titleist TSi3 Ventus blue 6x

3 wood: Titleist Tsi2 15 Ventus blue 7x

& Wood: Titleist TSi2 Ventus Red 9X
Taylormade Gapr low 2 ventus blue 9x
4-PW Cobra king forged CB KBS $ Taper 130 X flex
Wedges 50, 54, 60 Cleveland ZIPCORE
PUTTER; LAB DF2.1
BALL; Bridgestone BX, OR Taylomade TP5x PIX

Link to post
Share on other sites
  • 1 year later...

I’m sorry for digging up an old thread.

 

I previously played Project X LZ 6.0 and for whatever reason wanted to try a lighter shaft, so I tried the Modus 3 105 but haven’t really gotten a long with it and am thinking that I just really do like the heavier shaft. I did an online shaft fitting (COVID and whatnot) and one of the recommended shafts was the $ Taper....how is this comparable to the LZ 6.0 if I was to do the Stiff in the $ Taper?

 

thanks in advance

Link to post
Share on other sites
6 hours ago, Beej said:

I’m sorry for digging up an old thread.

 

I previously played Project X LZ 6.0 and for whatever reason wanted to try a lighter shaft, so I tried the Modus 3 105 but haven’t really gotten a long with it and am thinking that I just really do like the heavier shaft. I did an online shaft fitting (COVID and whatnot) and one of the recommended shafts was the $ Taper....how is this comparable to the LZ 6.0 if I was to do the Stiff in the $ Taper?

 

thanks in advance

I had modus 105s in my i210s. I was fit for PX 6s and $ tapers. The PX feel more board like and the feel isn’t quite as good. I went for the $ tapers based on that. They have knocked my spin and flight down considerably vs the 105s and Spun less than the PX.  I’ve had them for about 2 weeks now, and my timing and tempo is off from making such a big weight change, but they feel great and flight is much better.  I know not exactly what you were looking for, however my fitter said the LZ was just a spinnier version of the PX. 

  • Thanks 1

Gunga Galunga Golf - Golf Photography

Link to post
Share on other sites
23 minutes ago, jpbova said:

I had modus 105s in my i210s. I was fit for PX 6s and $ tapers. The PX feel more board like and the feel isn’t quite as good. I went for the $ tapers based on that. They have knocked my spin and flight down considerably vs the 105s and Spun less than the PX.  I’ve had them for about 2 weeks now, and my timing and tempo is off from making such a big weight change, but they feel great and flight is much better.  I know not exactly what you were looking for, however my fitter said the LZ was just a spinnier version of the PX. 

jpbova thanks for the response. did you do the stiff or the stiff+ in the $ Tapers.

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Our picks

    • 2021 RBC Heritage - discussions and links
      Please post any questions and comments here.
       
      2021 RBC Heritage - Tuesday #1
      2021 RBC Heritage - Tuesday #2
      2021 RBC Heritage - Tuesday #3
      2021 RBC Heritage - Tuesday #4
      2021 RBC Heritage - Tuesday #5
      2021 RBC Heritage - Tuesday #6
      2021 RBC Heritage - Tuesday #7
      2021 RBC Heritage - Tuesday #8
      2021 RBC Heritage - Tuesday #9
      2021 RBC Heritage - Tuesday #10
       

       
      2021 RBC Heritage - Tuesday #1
      2021 RBC Heritage - Tuesday #2
      2021 RBC Heritage - Tuesday #3
      2021 RBC Heritage - Tuesday #4
      2021 RBC Heritage - Tuesday #5
      2021 RBC Heritage - Tuesday #6
      2021 RBC Heritage - Tuesday #7
      2021 RBC Heritage - Tuesday #8
      2021 RBC Heritage - Tuesday #9
      2021 RBC Heritage - Tuesday #10
       
       

       
      Custom Cameron putters - 2021 RBC Heritage
      Bettinardi putter - 2021 RBC Heritage
      Robert Streb's custom stamped Vokey wedge - 2021 RBC Heritage
      Ben An's custom stamped Vokey - 2021 RBC Heritage
      • 15 replies
    • 2021 Valero Texas Open - discussion & links
      Please put any questions or comments here. 
       
      This week, the PGA Tour is at TPC San Antonio on the Oaks Course for the Valero Texas Open. GolfWRX was on-site Tuesday to catch a glimpse into the bags of some of the world’s top golfers.
       
      The field of 144 is getting ready to battle starting Thursday for the $7.7 million purse, with $1.386 million going to the winner. The tournament is also the last event where players can qualify for The Masters, just like Canadian Corey Conners did last year.
       
      Check out our "Most interesting photos" Part 1, and Part 2.
       

       
      2021 Valero Texas Open - Tuesday #1 2021 Valero Texas Open - Tuesday #2 2021 Valero Texas Open - Tuesday #3 2021 Valero Texas Open - Tuesday #4 2021 Valero Texas Open - Tuesday #5 2021 Valero Texas Open - Tuesday #6 2021 Valero Texas Open - Tuesday #7 2021 Valero Texas Open - Tuesday #8  


       
      Cameron putters (added Bernd Wiesberger's custom T-11) -2021 Valero Texas Open Piretti putters -2021 Valero Texas Open Branden Grace testing AutoFlex shaft @ 2021 Valero Texas Open  
      Check out our "Most interesting photos" Part 1, and Part 2.
       

       
        • Like
      • 29 replies
    • **GIVEAWAY** Odyssey Ten Triple Track Putter! ENTER NOW!
      NEW Odyssey Ten Triple Track putter giveaway!!!.To enter reply in this thread that you're IN!
       
      That's it. You'll be entered into the giveaway (one entry per person). Winner chosen at random in two weeks. Be sure to check out the attached pics. Good luck!
       
      If you are not a member her please register here to allow you to reply to this post and enter. Registration is free... https://forums.golfwrx.com/register/
      ======================================================================================================
      We randomize all the number of posts and the #1 number on the top is the winner. Say there is 1,000 replies from members. We will randomize 1 to 1,000 using a website that has a randomizer. It scrambles the numbers and the #1 is the first place and the #2 is the second etc. If the winner has duplicate entries we count the first
       





       
        • Thanks
        • Like
      • 1,599 replies
    • 2021 WGC Dell Technologies Match Play - discussion and links
      Please put any questions or comments here
       
       

       
      2021 WGC Dell Technologies Match Play - Monday #1
      2021 WGC Dell Technologies Match Play - Monday #2
      2021 WGC Dell Technologies Match Play - Monday #3
      2021 WGC Dell Technologies Match Play - Monday #4
      2021 WGC Dell Technologies Match Play - Monday #5
      2021 WGC Dell Technologies Match Play - Monday #6
       
       

       
      Hideki testing putters at WGC Dell Technologies Match Play
      Odyssey/Toulon Atlanta putter - 2021 WGC Dell Technologies Match Play
      Cameron putters - 2021 WGC Dell Technologies Match Play
      Patrick Reed testing TPT shafts 2021 WGC Dell Technologies Match Play
       
       
      • 54 replies
    • 2021 Players - discussion and links
      Please post any questions or comments here
       
       

       
      2021 Players - Monday #1
      2021 Players - Monday #2
      2021 Players - Monday #3
      2021 Players - Monday #4
      2021 Players - Tuesday #1
      2021 Players - Tuesday #2
      2021 Players - Tuesday #3
      2021 Players - Tuesday #4
      2021 Players - Tuesday #5
      2021 Players - Tuesday #6
       
       

       
      Maverick McNealy's custom 1 of 1 Callaway Apex MB irons - 2021 Players
      Adam Long's Cameron T-5 proto - 2021 Players
      Abraham Ancer's custom Muira irons and custom MMT shafts - 2021 Players
      Bettinardi putters & cover - 2021 Players
      Jon Rahm's bag - 2021 Players
      Xander Schauffele's bag - 2021 Players
      Sergio with a Cameron putter - 2021 Players
      Cameron T11 & 11.5 putters - 2021 Players
      Sergio Garcia's clubs - 2021 Players
      Scott Brown's Odyssey gamer - 2021 Players
       
       
       
      • 52 replies

×
×
  • Create New...