What size collared ferrules do I need?

[johnnybogey]

Going to be reshafting some apex irons. Heads are .370”, shafts are .355”.

 

Which size collared ferrules do I need?

 

Thanks

[Ri_Redneck]

You should use .355 ferrules with an outside diameter as large or larger than the OD of the hosel. Using .370 can lead to excessive creep up the shaft unless they are epoxied on really well. Remember that you also need shims for the shaft tips to ensure proper shaft fitting.

 

BT

[johnnybogey]

> @Ri_Redneck said:

> You should use .355 ferrules with an outside diameter as large or larger than the OD of the hosel. Using .370 can lead to excessive creep up the shaft unless they are epoxied on really well. Remember that you also need shims for the shaft tips to ensure proper shaft fitting.

>

> BT

 

Thanks BT.

 

Where can I get these ferrules from? Looking at the ones they sell on golfworks, not sure if those will work, e.g. top diameter .355 to fit shaft but .370 collar diameter to fit the head.

 

Have some shins ready to be ordered, just need to figure out the ferrules.

 

Thanks!

 

 

[third-times-a-charm]

For the callaway apex line, golfworks has a specific 'callaway ferrule' you need:

 

https://www.golfworks.com/callaway-collared-355-ferrule/p/bb9051/

 

here is the shim-T you need:

 

https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/shim/

[johnnybogey]

> @third-times-a-charm said:

> For the callaway apex line, golfworks has a specific 'callaway ferrule' you need:

>

> https://www.golfworks.com/callaway-collared-355-ferrule/p/bb9051/

>

> here is the shim-T you need:

>

> https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/shim/

 

Thanks for that. Yeah, those were the ones I was looking at. Going to order them.

 

[third-times-a-charm]

> @johnnybogey said:

> > @third-times-a-charm said:

> > For the callaway apex line, golfworks has a specific 'callaway ferrule' you need:

> >

> > https://www.golfworks.com/callaway-collared-355-ferrule/p/bb9051/

> >

> > here is the shim-T you need:

> >

> > https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/shim/

>

> Thanks for that. Yeah, those were the ones I was looking at. Going to order them.

>

 

I have modus .355 shafts in my .370 CF16 irons, those two items work great and I've assembled/reassembled my iron set 4-5 times with them without issue.

[johnnybogey]

> @third-times-a-charm said:

> > @johnnybogey said:

> > > @third-times-a-charm said:

> > > For the callaway apex line, golfworks has a specific 'callaway ferrule' you need:

> > >

> > > https://www.golfworks.com/callaway-collared-355-ferrule/p/bb9051/

> > >

> > > here is the shim-T you need:

> > >

> > > https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/shim/

> >

> > Thanks for that. Yeah, those were the ones I was looking at. Going to order them.

> >

>

> I have modus .355 shafts in my .370 CF16 irons, those two items work great and I've assembled/reassembled my iron set 4-5 times with them without issue.

 

Nice! thanks again for the input everyone!