Mizuno MP-20 HMB - July 2019

[MBBG]

I’d been going round and round over whether to break my HMB/MB set at the 6 or 7 iron. After seeing your pics I’m glad I went 7-P in the MB because the HMB is probably a little chunkier than what I’d like to see in that slot.

[Lenny2]

Hit the HMB today for about 45 minutes and it’s very nice. Such great soft feel like you expect from Mizuno. Looked very good at address. I was on grass and they are very easy to hit and still I hit 2 bad shots one of the toe and one thin and both shots were only a few yards off . Very easy to work the ball. These will for sure be my 4,5,6 and maybe 7. Can’t wait you hit the MMC.

[chinaski]

> @mtex22 said:

> So I spent some time with the HMB today. They are a bit bigger than I thought but not in the way that I thought. The offset is fine, the blade length is fine. The top line is very thick but what really stood out for me was the size from the top line to the sole. It has a bigger footprint vertically but compact blade length. I hit about 10 shots with them with a few different shafts and they felt great for a hollow iron especially since its not filled in side. Feels forgiving. It will definitely capture the market for those who need more forgiveness and need a higher launch. I did also spend some time with the MMC, they are more my cup of tea as far as size, topline, feel more solid and I did hit them further for some reason probably do the the launch angle differences. Again this is all on a launch monitor so I take results with a grain of salt. I am not the best indoor swinger. Here are some pics I snapped vs AP2 718

>

>

>

>

 

I hit the HMB 7i yesterday. Only was able to get in 4 swings since I was just running in for a grip and didn't expect to see them there yet. They feel great. Numbers seemed a little shorter than my 745's, but I didn't warm up and didn't hit side by side. I agree that the top line is a little thicker, but the angle of your pic is a little deceiving. I'd compare the 7i topline to P770. They look pretty good. I'm excited to see the whole set, especially the short irons.

 

[Warrick]

The sole looks massive, like the fli-hi

[BostonWRX]

TXG review today on the HMB at 10AM

[chinaski]

> @Warrick said:

> The sole looks massive, like the fli-hi

 

Yeah they are thicker. They look beveled to play thinner though. I would definitely want to hit off grass before considering.

[Warrick]

> @chinaski said:

> > @Warrick said:

> > The sole looks massive, like the fli-hi

>

> Yeah they are thicker. They look beveled to play thinner though. I would definitely want to hit off grass before considering.

 

That is always the best way. I thought about trying a #5 iron for added launch

[phatchrisrules]

I was originally thinking of going full HMB when I heard the announcement but now I'm not sure if that's a good idea now that I have seen it in person. I think I might do 2 of each: 5-6 HMB, 7-8 MMC, 9-P MB. I would have to hit them side by side to see, but I do agree with others on here that the new 790 definitely looks better at address as does the i500. Then again, no pictures on the scorecard right?

[Lumberjack627]

Maybe no pictures on the scorecard but looking down at the club If you are unhappy or not confident with the club you will hit poor shots that’s how I see it. I was very excited for these clubs have not seen them in person yet but from the looks topline is huge! Maybe mmc and mb for me.

[Warrick]

I like the whole line, but am staying with 919T, just works and prefer the satin look and overall profile

[BearQ]

> @Warrick said:

> I like the whole line, but am staying with 919T, just works and prefer the satin look and overall profile

 

You are bound to stick with most of your bag after disappointment in T20 wedges too. Watching ya ;)

 

 

[tsecor]

whats wrong with the T20 wedges? I finally need to replace an old vokey and was deciding between the Sm7 and the T20.....> @BearQ said:

> > @Warrick said:

> > I like the whole line, but am staying with 919T, just works and prefer the satin look and overall profile

>

> You are bound to stick with most of your bag after disappointment in T20 wedges too. Watching ya ;)

>

>

 

 

[BearQ]

> @tsecor said:

> whats wrong with the T20 wedges? I finally need to replace an old vokey and was deciding between the Sm7 and the T20.....> @BearQ said:

> > > @Warrick said:

> > > I like the whole line, but am staying with 919T, just works and prefer the satin look and overall profile

> >

> > You are bound to stick with most of your bag after disappointment in T20 wedges too. Watching ya ;)

> >

> >

>

>

Nothing to me, especially from just pics so far T20 looks like a great wedge. Warrick is the resident Mizuno guy, and it seems he’s not making any moves (surprised!).

 

But yeah mostly just jokin

 

 

[MBBG]

I guess I don’t really get the point of throwing in 1-2 MMC in the middle of a set. From what I’ve gathered the HMB and MMC are your equally forgiving options for longer irons one just launches higher. (HMB)

 

So it seems logical to me if someone is going to make a combo set using the blades in the short irons, they would then select one of the HMB or MMC in the longer irons depending on launch needs.

 

I don’t care what anyone wants to play as long as they’re happy, it just doesn’t make a ton of sense to me. Plus I think the resale value would be hurt.

[Warrick]

I have 2 sets of 919T, a set of 900F and full sets of T7 for all 3, newest set is even 45,49,53,58 in T7. I expected to want something from this line but am sticking, tired of bag changes.

[tsecor]

Vorshel says the HMBs are more forgiving than the MMC's across the line...but how do you measure that? I tend to agree with you but I would assume, based on the technology, the HMB's are longer than the MMC across the board. > @MBBG said:

> I guess I don’t really get the point of throwing in 1-2 MMC in the middle of a set. From what I’ve gathered the HMB and MMC are your equally forgiving options for longer irons one just launches higher. (HMB)

>

> So it seems logical to me if someone is going to make a combo set using the blades in the short irons, they would then select one of the HMB or MMC in the longer irons depending on launch needs.

>

> I don’t care what anyone wants to play as long as they’re happy, it just doesn’t make a ton of sense to me. Plus I think the resale value would be hurt.

 

 

[tbowles411]

> @Warrick said:

> I have 2 sets of 919T, a set of 900F and full sets of T7 for all 3, newest set is even 45,49,53,58 in T7. I expected to want something from this line but am sticking, tired of bag changes.

I'm sorry sir, I need put a punch in your Wrx card...nothing personal. This is your first warning... ;)

 

[tsecor]

I am watching or should I say trying to watch all the you-tubers review the MP20's....I am already ready to punch the screen in....Is this all about entertainment now? I used to love James Robinson but after watching him act like a 12 yr old when hitting the new Mizuno line, i had to shut it off..

[tsecor]

Watching these you tubers is ridiculous now.

[VGVG]

> @arobbins3 said:

> > @soap1984 said:

> > They explicitly stated they hadn't made blades in a while and so went this route and I assume will go back to the middle of the road nonsense (which seems to please no one) on the next release for lefties. I'm happy with the release for onc

> @arobbins3 said:

> > @soap1984 said:

> > They explicitly stated they hadn't made blades in a while and so went this route and I assume will go back to the middle of the road nonsense (which seems to please no one) on the next release for lefties. I'm happy with the release for once.

> >

> > I also don't totally understand why every other company can make lefty and mizuno does not; I can't imagine they are selling a ton of 2 irons and even 3 irons at this point in right handed and yet they still make them. I may be wrong but I bet they sell close to as many lefty sets of these as they sell right handed drivers at full price...

> >

> > Anyway sorry don't want to turn the thread into a lefty debate I know everyone hates that lol.

>

> Lefties need a voice! Hahaha. But seriously, it's an interesting position and I do understand the business aspect. But, as a lefty, I'm tired of getting left out of so many great irons. The HMBs look like they're gonna be an outstanding option for a lot of people and I would at least like to hit that in a 7i compared to the SEL blades. But, like other manufacturers not releasing their most-intriguing clubs (to me), it is something that lefties have to deal with!

 

Ouch!

 

https://mygolfspy.com/2019-most-wanted-utility-iron/

[arobbins3]

> @VGVG said:

> > @arobbins3 said:

> > > @soap1984 said:

> > > They explicitly stated they hadn't made blades in a while and so went this route and I assume will go back to the middle of the road nonsense (which seems to please no one) on the next release for lefties. I'm happy with the release for onc

> > @arobbins3 said:

> > > @soap1984 said:

> > > They explicitly stated they hadn't made blades in a while and so went this route and I assume will go back to the middle of the road nonsense (which seems to please no one) on the next release for lefties. I'm happy with the release for once.

> > >

> > > I also don't totally understand why every other company can make lefty and mizuno does not; I can't imagine they are selling a ton of 2 irons and even 3 irons at this point in right handed and yet they still make them. I may be wrong but I bet they sell close to as many lefty sets of these as they sell right handed drivers at full price...

> > >

> > > Anyway sorry don't want to turn the thread into a lefty debate I know everyone hates that lol.

> >

> > Lefties need a voice! Hahaha. But seriously, it's an interesting position and I do understand the business aspect. But, as a lefty, I'm tired of getting left out of so many great irons. The HMBs look like they're gonna be an outstanding option for a lot of people and I would at least like to hit that in a 7i compared to the SEL blades. But, like other manufacturers not releasing their most-intriguing clubs (to me), it is something that lefties have to deal with!

>

> Ouch!

>

> https://****.com/2019-most-wanted-utility-iron/

 

At least they are making the 3-4 iron in HMB which helps!

[PowerCobra98]

Placed my order for a full HMB set 4i-PW. Going to be a tough 2 week wait for them to arrive.

[JDMRN81]

Got a chance to hit the HMB's today at GG. I was very impressed with how they feel and they don't look as large in person IMO. I like when they release clubs this late in the season......can usually pick up a great deal on a used set before my season starts up here in the North.

[Cheesehead42]

My local shop does not have the heads yet. I was about to pull the trigger on the 919 Forged when I saw the HMB's coming. Anyone have insight between feel, distance, forgiveness of the HMB vs 919 Forged?

[MTgolf]

> @phatchrisrules said:

> I was originally thinking of going full HMB when I heard the announcement but now I'm not sure if that's a good idea now that I have seen it in person. I think I might do 2 of each: 5-6 HMB, 7-8 MMC, 9-P MB. I would have to hit them side by side to see.

 

I was thinking similar to you except doing the 6-7 in the MMC and 8-PW in MB to be able to keep ball flight down a little bit and throw in the 5 HMB to get the height. Would have to work out the lofts to not have too large of gaps between the MB's and transition into the MMC or HMB.

 

 

[noodle3872]

Here is a table with the club specs. You can also use the 3D comparison to look at the clubs.

 

https://golf.mizunoeurope.com/irons-comparison-table/

[Oldboy]

mizuno europe >>>>mizunousa

 

can we get some of the mizuno soft goods here in the US??

[colinhlau]

Some love for the lefties!

[JoeJoeJoeUrBoat]

Hit these today against the 790s. They didn’t feel as good and the dispersion was worse front to back. Disappointed to say the least. I hit them high though. Mind you, this was only with the 7 iron. I really want to hit the 9 iron and the 4 iron.

[PowerCobra98]

> @Cheesehead42 said:

> My local shop does not have the heads yet. I was about to pull the trigger on the 919 Forged when I saw the HMB's coming. Anyone have insight between feel, distance, forgiveness of the HMB vs 919 Forged?

 

Let you know in 2 weeks once I get my HMB's. I'm gaming 919 Forged right now.