Jump to content

Has my shaft been tipped? Shaft Measurements from raw tip to graphics


The General
 Share

Recommended Posts

1000 thank yous to **benno_r** for compiling this list over the years!!!

 

Feel free to add or make corrections. Thought we needed a database for all shafts and if they've been tipped. Thanks.

 

Aldila

NV 75 Stiff. 26" to lower left corner of first "A" Aldila

NVS 75 Stiff. 26" to lower left corner of first "A" Aldila

Aldila RIP Alpha Red Eyes 70g Reg. 26 7/8" from tip to bottom of word Aldila.

Rogue Silver & Black. 31.5" from tip point of the "A" in the atom.

 

Fujikura

Fuel (non TS). 20.5" from tip to "x" in Flex

Speeder 6.1 Stiff. 17.5" from tip to "a" in Fujikura (reported same for all VC speeder shafts - not confirmed)

Speeder 661. 16" from tip to "a" in Fujikura

 

Grafalloy

BiMatrix Prototype. 8" Steel section.

 

Graphite Design

Tour AD-BB 6S. 24.75" Tip to first green ring.

Tour AD-DI 6S / 7S. 24.75" Tip to first green ring.

Tour AD-DI 7S "Black". 25.75" Tip to first green ring.

Tour AD-DI 6X. 23.75" Tip to first green ring.

Tour AD-DI 7X. 24.75" Tip to first green ring.

Tour AD-DJ 6S. 24.75" Tip to first green ring.

Tour AD-GT 7S. 24.75" Tip to first green ring.

Tour AD-MJ 6S. 24.75" Tip to first ring.

Tour AD-MT 7S. 24.75" Tip to first ring.

24.75"seems to be the go Graphite Design ADs in stiff

AD DI 7S - 24.75" to first green ring

AD BB 6S - 24.75" to first blue ring

I am guessing via comparison that X Flex are an inch shorter to the first ring.

AD DI 6s 24.75" first green ring

AD DI 6s 27.75" first green ring

Also checked an AD GT 7S, an ADDJ 6S, an ADDI 7S, and 7X, and all conform to the 24.75" to first green ring measurement principle.

Graphite Design - Black AD DI is 25.75" to first ring.

Graphite Design - AD DI 7S - 24.75" to first green ring

Graphite Design - AD BB 6S - 24.75" to first blue ring

GD AD MJ 6s 24.75 to first yellow ring.

DI 7s is 24.75" to band

An AD DI 6X is an inch shorter to the first green ring than a 6S, so a 6S tipped an inch (to give X flex equivalent) will have rings aligning to 6X out of the factory. The shaft in question was tipped half an inch, which is 3 wood tipping spec.

 

Matrix

Altus Hybrid Stiff. 15.5" tip to "S" in Altus

Radix HD7 stiff (blue shaft). 20.5" tip to "7"

Red Tie 7Q3 R Flex. 15.5” tip to "x" in flex

White Tie 7X3 R Flex. 16.25” tip to "x" in flex

Black Tie 7M3 R flex. 20.5” tip to "x" in flex

Ozik TP7HD S flex. 21-3/8ths" from tip to the centre of the S.

Redtie 7Q3 Reg shaft. It measure 14.5" from the tip to the start of the x on R Flex, how far has it been tipped??

7Q3 R Flex – 15 ½”

7X3 R Flex – 16 ¼”

7M3 R flex – 20 ½”

 

Mitsubishi-Rayon

Diamana Ahina. 18-3/16" tip to "N" in Rayon

Diamana Kai'li 70S. 18.25" tip to "N" in Rayon

Fubuki Tour 73s. 20-7/8" Tip to "S" in "Flex-S"

OG Redboard 18.75" tip to "N" in Rayon

OG Blueboard 20.75" tip to "N" in Rayon

Diamana D+ 72s. 19-5/8" tip to "N" in Rayon

Kuro Kage Silver TINI (all models). 17.75" tip to "N" in Rayon

Mitsubishi Rayon Kuro Kage Silver TINI 17.75" to the N in rayon, confirmed by MRC-Golf. That's for all shafts in the series.

Redboard 18.75" to the N in Rayon.

Blueboard 20.75" to the N in Rayon.

Diamana D+ 72 x5ct - 19 5/8" to the the "n" in rayon for a

Diamana B Series 60 Stiff 24" to last 'a' in Diamana

 

Miyazaki

Miyazaki c Kua Tour 43X. 28" tip to front of M

 

Oban Shafts

Devotion 65 04 flex. 24.25" from tip to bottom of small gold band

Kiyoshi Purple 65 04 flex. 24.25" from tip to 1st gold band

Kiyoshi Gold 65 04 flex. 24.25" from tip to 1st gold band

Kiyoshi White 65 05 flex. 24.25" from tip to 1st gold band

Kiyoshi White "TM special". 65 04 flex. 24" from tip to bottom of copper band.

 

Quadra Shafts

Fire Express TP-V 65 SR Flex, 23.5" tip to start of "c" in composite.

 

UST Mamiya

Attas T2 6S. 21.25" from tip to end of "SG for Shaft" logo

Attas 4u 6S. 19.5" from tip to beginning of black graphics

Attas 6star 7s. 20" from tip to start of graphics

Axivcore Red 69S/79S. 24.5" from tip to grey paint

Axivcore Black 89S. 24 9/16" from tip to grey band

Proforce V2 19-7/8" from tip to grey band

VTS Black 7s. 23" from to tip to "e" in Proforce

UST Mamiya Proforce AXIVCORE Black 89 Serries S Flex - 24 9/16" from tip to grey band.

 

Veylix

Attas T2 6S. 21.25" from tip to end of "SG for Shaft" logo

Veylix Alpina 673 wild eye. 20.1" from tip to the n in ION

Veylix Alpina 673 wild eye , 20.1" to the n in ION according to the VP of sales at Veylix. Recommended tipping for a 3 wood is 1".

 

MT7s is 23.75" to band

 

 

  • Thanks 1
Link to comment
Share on other sites

  • 3 months later...
  • 1 month later...

Aerotech Steelfiber HLS 880 f4 Hybrid shaft: 20 3/4" to orange f4 circle

 

Project X Evenflow t1100 White 75g 6.0 stiff: 21 5/8" to the X

Let me tell you what Wooderson is packin'
Titleist TSi2 9° AD IZ 6s
Titleist TS2 16.5°  EF White 65s
Ping G410 21° EF White 75s
Ping G410 22°/25°/30° Hybrid Tensei White
Mizuno HM 7-PW Recoil 95r
Ping Glide 3.0 GW/SW

Ping Eye 2 XG LW

Ping Sigma 2 Valor

Link to comment
Share on other sites

  • 5 months later...

I found it... jmcdonald has it right. The measurement for the other Tour AD Wood models of DJ, BB, GT, MT, MJ, M9003 and GP are also 24 5/8" from the tip to the first ring in the graphics closest to the tip on a brand new shaft. For the Tour DI Hybrids, it is 21 5/16", for the Tour HY hybrids it is 20 7/8". The Tour AD 9003's are 25 3/4".https://forums.golfwrx.com/discussion/comment/13241268/#Comment_13241268

 

 

  • Thanks 1
Link to comment
Share on other sites

  • 4 months later...

since this thread has a number of data points in it...

 

does anyone have the tip to graphic for the Aldila NV hybrid shaft (105x, shouldn't matter across weights and flexes)...

 

Thanks in advance

TM SIM 10.5* - Ventus Velocore Blue 6S
TEE  CBX119  2h  17* Aldila Rogue Black 85TS 
TEE  XCG7B  4h  22* Aldila Rogue Black 85TS
TEE  XCG7B  5h  25* Diamana Thump i465ct 4iron shaft
Wishon 560MC 5-PW (27,31,35,39,43.5,48) DG120 S300
Vokey SM4 52-08F S200
Wishon HM wedges 56/60 Wishon Smooth steel Stiff
2013-2016 SC Futura X5R 33' flownecked by Bastain-cerakote sniper gray-silver dots-white flange sight line-SS Flatso 2.0

2012-2013 SC California Sonoma 33" -SS Flatso 2.0
TM TP5x

Link to comment
Share on other sites

  • 7 months later...
12 hours ago, mstorey720 said:

Anyone know the tip to graphic for a Tensei Pro Orange?

 

I think I read somewhere that all the tensei ck pro series have the same measurements

Epic Speed + ZF 6 / TSi2 17.25 + AD HD 7 / TSi2 20.25 + AD MJ 8 / Apex 21 4 + RIP 100  / Apex 19 Pro + Modus3 120 / MD5 / Toulon JDM Austin 

Link to comment
Share on other sites

Heres more for recent diamanas:

 

Diamana BF tip to Rayon is 18 9/16”

Diamana BF tip to Chemical is 18 3/16”

 

Diamana ZF 22.75" from tip to the "a" in diamana

18" from the tip to the "L" in Chemical.

 

Diamana TB 30.25” tip to top of Circle D logo

  • Like 1

Epic Speed + ZF 6 / TSi2 17.25 + AD HD 7 / TSi2 20.25 + AD MJ 8 / Apex 21 4 + RIP 100  / Apex 19 Pro + Modus3 120 / MD5 / Toulon JDM Austin 

Link to comment
Share on other sites

7 minutes ago, junkfry said:

Which E in V"e"locor"e"?

The closest one to the tip

TM SIM 10.5* - Ventus Velocore Blue 6S
TEE  CBX119  2h  17* Aldila Rogue Black 85TS 
TEE  XCG7B  4h  22* Aldila Rogue Black 85TS
TEE  XCG7B  5h  25* Diamana Thump i465ct 4iron shaft
Wishon 560MC 5-PW (27,31,35,39,43.5,48) DG120 S300
Vokey SM4 52-08F S200
Wishon HM wedges 56/60 Wishon Smooth steel Stiff
2013-2016 SC Futura X5R 33' flownecked by Bastain-cerakote sniper gray-silver dots-white flange sight line-SS Flatso 2.0

2012-2013 SC California Sonoma 33" -SS Flatso 2.0
TM TP5x

Link to comment
Share on other sites

10 hours ago, third-times-a-charm said:

Heres more for recent diamanas:

 

Diamana BF tip to Rayon is 18 9/16”

Diamana BF tip to Chemical is 18 3/16”

 

Diamana ZF 22.75" from tip to the "a" in diamana

18" from the tip to the "L" in Chemical.

 

Diamana TB 30.25” tip to top of Circle D logo

 

So, in this photo I have both Diamana BF and DF shafts.

The BF looks to be at 17-3/16"to the l in Chemical, so that's tipped 1 inch.

 

The DF is at 18-1/8" to the l in Chemical is untipped in my mind.

 

That is if the DF and BF and, maybe by extension, RF and ZF all have the same tip to graphic dimension.

Diamana BF and DF tip to graphic.jpg

TM SIM 10.5* - Ventus Velocore Blue 6S
TEE  CBX119  2h  17* Aldila Rogue Black 85TS 
TEE  XCG7B  4h  22* Aldila Rogue Black 85TS
TEE  XCG7B  5h  25* Diamana Thump i465ct 4iron shaft
Wishon 560MC 5-PW (27,31,35,39,43.5,48) DG120 S300
Vokey SM4 52-08F S200
Wishon HM wedges 56/60 Wishon Smooth steel Stiff
2013-2016 SC Futura X5R 33' flownecked by Bastain-cerakote sniper gray-silver dots-white flange sight line-SS Flatso 2.0

2012-2013 SC California Sonoma 33" -SS Flatso 2.0
TM TP5x

Link to comment
Share on other sites

8 hours ago, geochitown said:

 

So, in this photo I have both Diamana BF and DF shafts.

The BF looks to be at 17-3/16"to the l in Chemical, so that's tipped 1 inch.

 

The DF is at 18-1/8" to the l in Chemical is untipped in my mind.

 

That is if the DF and BF and, maybe by extension, RF and ZF all have the same tip to graphic dimension.

Diamana BF and DF tip to graphic.jpg

1/8 or 3/16 - either way is fine. Its just error of the person who measured (I just copied those from other threads). 3/16 is like a hair over 1/8.

 

The point is that is your shaft is tipped .5" or 1" or 1.5" you would be able to tell even if we said it was just 18" from tip to graphic since those are much larger numbers.

 

 

  • Like 1

Epic Speed + ZF 6 / TSi2 17.25 + AD HD 7 / TSi2 20.25 + AD MJ 8 / Apex 21 4 + RIP 100  / Apex 19 Pro + Modus3 120 / MD5 / Toulon JDM Austin 

Link to comment
Share on other sites

  • 1 month later...

Bumping this useful thread for the following:

 

Anyone have the tip to graphic for the Fujikura Atmos Tour Spec Hybrid.

 

For the Blue 8S I have (unknown tipping, but unlikely untipped, likely 1/2") the tip to graphic is 14.25" from the tip (tip trimmed some amount) to the "a" in Fujikura

 

Edit to Add:  Response from Fujikura CS, thanks Chad!

 

15-1/8" to the "a" in Fujikura

 

Edited by geochitown
added tip to graphic dimension received from Fujikura CS

TM SIM 10.5* - Ventus Velocore Blue 6S
TEE  CBX119  2h  17* Aldila Rogue Black 85TS 
TEE  XCG7B  4h  22* Aldila Rogue Black 85TS
TEE  XCG7B  5h  25* Diamana Thump i465ct 4iron shaft
Wishon 560MC 5-PW (27,31,35,39,43.5,48) DG120 S300
Vokey SM4 52-08F S200
Wishon HM wedges 56/60 Wishon Smooth steel Stiff
2013-2016 SC Futura X5R 33' flownecked by Bastain-cerakote sniper gray-silver dots-white flange sight line-SS Flatso 2.0

2012-2013 SC California Sonoma 33" -SS Flatso 2.0
TM TP5x

Link to comment
Share on other sites

Fujikura Ventus HB hybrid shaft tip to graphic is the same as the driver shafts,

4" from the tip to the final "e" in Velocore.

TM SIM 10.5* - Ventus Velocore Blue 6S
TEE  CBX119  2h  17* Aldila Rogue Black 85TS 
TEE  XCG7B  4h  22* Aldila Rogue Black 85TS
TEE  XCG7B  5h  25* Diamana Thump i465ct 4iron shaft
Wishon 560MC 5-PW (27,31,35,39,43.5,48) DG120 S300
Vokey SM4 52-08F S200
Wishon HM wedges 56/60 Wishon Smooth steel Stiff
2013-2016 SC Futura X5R 33' flownecked by Bastain-cerakote sniper gray-silver dots-white flange sight line-SS Flatso 2.0

2012-2013 SC California Sonoma 33" -SS Flatso 2.0
TM TP5x

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Our picks

    • 2021 RSM Classic - Discussion and Links
      2021 RSM Classic - Monday
      2021 RSM Classic - Tuesday #1
      2021 RSM Classic - Tuesday #2
       
       
      Trey Mullinax - WITB - 2021 RSM Classic
      Brett Drewitt - WITB - 2021 RSM Classic
      Matt Wallace - WITB - 2021 RSM Classic
      Josh Creel - WITB - 2021 RSM Classic
      Ben Crane - WITB - 2021 RSM Classic
      Justin Lower - WITB - 2021 RSM Classic
      Adam Svensson - WITB - 2021 RSM Classic
      Brendon Todd - WITB - 2021 RSM Classic
      Webb Simpson - WITB - 2021 RSM Classic
      Chesson Hadley - WITB - 2021 RSM Classic
      Kiradech Aphibarnrat - WITB - 2021 RSM Classic
      Bill Haas - WITB - 2021 RSM Classic
      Max Homa - WITB - 2021 RSM Classic
      Nick Watney - WITB - 2021 RSM Classic
       
       
      New Odyssey Tri Hot putters - 2021 RSM Classic
       
       
       
       
      • 1 reply
    • 2021 Hewlett Packard Enterprise Houston Open - Discussion & Links
      Please put any questions or comments here
       
      Pat Perez - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Tony Finau - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Kramer Hickok - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Paul Barjon - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Nate Lashley - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Seamus Powers - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Dylan Frittelli - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      C.T. Pan - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Chase Koepka - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Branden Grace - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Marc Leishman - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Martin Laird - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Shane Lowery - WITB - @ 2021 Hewlett Packard Enterprise Houston Open
       
      Cameron CT T-11 putter - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      New Graphite Design shafts - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Cameron cover from 2021 ZOZO Championship - @ 2021 Hewlett Packard Enterprise Houston Open
      Bettinardi covers - @ 2021 Hewlett Packard Enterprise Houston Open
      Cameron CT putters - @ 2021 Hewlett Packard Enterprise Houston Open
       
       
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #1
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #2
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #3
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #4
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #1
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #2
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #3
       
       
       
       
      • 1 reply
    • APPLY NOW: L.A.B. Golf MEZZ.1 Putter (Early Access) Member Testing! 10 Testers Needed!
      L.A.B. Golf is choosing ten GolfWRX members to receive their MEZZ.1 putter early and put their brand new product to the test before reporting back to the community about what they see. The selected testers will be one of the first to experience the MEZZ.1 from L.A.B. GOLF, their newest Lie Angle Balanced design, ahead of it's January 2022 launch!
       
      About The L.A.B. Golf Mezz.1 Putter
      MEZZ.1 is our new mid-mallet putter that’s fully CNC machined from a billet of 6061 aircraft aluminum (body) and 303 stainless steel (midsection) to create our best-feeling — and we think best looking — putter to date. It includes 10 weights (eight on the bottom, two on the sides) that allow us to individually build each putter to a golfer’s exact specifications.
       
      How To Apply
      In a post below, answer the following questions.
       
      1. City, State?
      2. Handicap?
      3. What is your current putter?
      4. Have you ever used a L.A.B. Golf putter?
      5. Why do you want to review the MEAZZ.1 putter?
      6. Do you agree to participate in an ongoing testing thread, posting reviews and photos?
       
      That's it! @labgolf and GolfWRX will choose the testers in about 2 weeks! This testing event is for good-standing members in the USA only!
       
        • Thanks
        • Like
      • 435 replies
    • 2021 CJ Cup at The Summit Club - Discussion and Links
      Please put any questions or comments here
       
       
      2021 CJ Cup at The Summit Club - Tuesday #1
      2021 CJ Cup at The Summit Club - Tuesday #2
       
       
      Adam Scott - WITB - 2021 CJ Cup at The Summit Club
      Justin Rose - WITB - 2021 CJ Cup at The Summit Club
      Collin Morikawa - WITB - 2021 CJ Cup at The Summit Club
      Jason Day - WITB - 2021 CJ Cup at The Summit Club
      Justin Thomas - WITB - 2021 CJ Cup @ The Summit Club
      Erik Van Rooyen - WITB - 2021 CJ Cup @ The Summit Club
      Matt Jones - WITB - 2021 CJ Cup at The Summit Club
      Cam Davis - WITB - 2021 CJ Cup at The Summit Club
      Cam Smith - WITB - 2021 CJ Cup at The Summit Club
      Byeong Hun An - WITB - 2021 CJ Cup at The Summit Club
      Min Kyu - WITB - 2021 CJ Cup at The Summit Club
      Joohyung Kim - WITB - 2021 CJ Cup @ The Summit Club
      Tommy Fleetwood - WITB - 2021 CJ Cup @ The Summit Club
      Jordan Spieth - WITB - 2021 CJ Cup @ The Summit Club
      Lucas Glover - WITB - 2021 CJ Cup @ The Summit Club
      Keegan Bradley - WITB - 2021 CJ Cup @ The Summit Club
       
       
       
      Gary Woodland's new Cameron putter - 2021 CJ Cup @ The Summit Club
      Kevin Na's new Odyssey/Toulon putter - 2021 CJ Cup @ The Summit Club
      Jucie wedges & Proto irons - 2021 CJ Cup at The Summit Club
       
       
       
       
      • 6 replies
    • 2021 Shriners Hospitals for Children Open WITB Photos- Discussion & Links
      Please put any questions or comments here...
       
      Links:
       
      Harry Higgs - WITB - 2021 Shriners Hospitals for Children Open
      Ian Poulter - WITB - 2021 Shriners Hospitals for Children Open
      Corey Conners - WITB - 2021 Shriners Hospitals for Children Open
      Harry Higgs - WITB - 2021 Shriners Hospitals for Children Open
      Matt NeSmith - WITB - 2021 Shriners Hospitals for Children Open
      Doug Ghim - WITB - 2021 Shriners Hospitals for Children Open
      New Cameron Las Vegas covers - 2021 Shriners Hospitals for Children Open
      New Project X HZRDUS Smoke RDX shafts - 2021 Shriners Hospitals doe Children Open
       
       

       
        • Like
      • 15 replies

×
×
  • Create New...