Jump to content

Goodwood Golf Co


Recommended Posts

Hey everyone just wanted to share a putter I recently bought and haven't seen anyone post about them before. I was looking for a custom putter and looked at everyone I could find from TLamb to Mannkrafted. I found Goodwood on Instagram and his prices are incredibly affordable for a custom piece. He worked with me on doing the hammered bit as thats what I was really after. The feel off the putter is incredible I

was really surprised vs the scotty cameron pro platinum mid slant id been using for the past 10 years almost. I went with the unmilled face and am loving it. Also went with the raw finish as I wanted to eventually get the rusted look. Let me know what you think of it! Thanks!

vt64645ceewq.jpeg

e2kiflwltklt.jpeg

nzvxf72nqtzr.jpeg

 

  • Like 1
Link to comment
Share on other sites

Hey man, kudos for going with a new builder. It's nice to have a personalized putter with your own personal touch. In this case, I think it looks a little bit rough around the edges. The toe and topline look a little sharp for me and the stamping is a bit...well not my style.

 

Regardless with a little patina I think it will look cool

 

Why go with an unfilled face?

COBRA LTD w. Hzrdus Red
WISHON 919 w. Hzrdus Red
TAYLORMADE Issue Aeroburner w. Tensei Blue
PING G25 w. Tensei Blue
PING I200 w. AWT 2.0
PING Glide 2.0 Stealth
MannKrafted Carbon WB Rattler
Xenon Copper Wide X
SGC 902

Link to comment
Share on other sites

> 5hort5tuff said:

> Hey man, kudos for going with a new builder. It's nice to have a personalized putter with your own personal touch. In this case, I think it looks a little bit rough around the edges. The toe and topline look a little sharp for me and the stamping is a bit...well not my style.

>

> Regardless with a little patina I think it will look cool

>

> Why go with an unfilled face?

 

Yea I wanted something that actually looked handcrafted and imperfect like the stamping I didn't want it to look like it had been made in a factory like scottys. The unmilled I just wanted to try and see if had some better feel since I can always get it milled if I didn't like it. So far I'm loving the feel off of it. It rolls a lot better than my scotty which really surprised me

 

Link to comment
Share on other sites

Looks cool, I've been following him since the beginning, some of the usual suspects when it comes to models but his pricing is great and he's getting better as time goes on.

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

Just came by this topic on a whim and started following the guy on IG as a result. Turns out he's local, which is really cool. Also means I'm going to buy another putter I suppose.

Sim2 8* w/ Ventus Black 6X

Sim TI Rocket 14* w/ Atmos Black TS 7x

Cobra Speedzone Tour 18* w/ Speeder 867 TR 

Srixon z765 (4-P) w/ Project X 6.5

Vokey SM8 w/ Project X 6.5 (50/55/60)

Rife Iconic Vault 001

Link to comment
Share on other sites

> @MattM97 said:

> Looks cool, I've been following him since the beginning, some of the usual suspects when it comes to models but his pricing is great and he's getting better as time goes on.

 

Everyone has to have an allendale/newport/anser style in their lineup. But how many are dropping putters with bullet bottoms?

I got one just for that reason. David faded the face heel, dropped a dot on it, fabbed up a jig to stamp the sole... did everything I asked for. Just need to work on some painting techniques for bigger dots. :wink:

61j9pfnpj9rd.jpg

jqjxa1712809.jpg

gb0lvmcwwj4i.jpg

ycs8r0gtvh9d.jpg

 

Great to work with. He is looking to put out gamers first, and keep it relatively simple stamping wise.

But yes, the feel is incredible. Super solid and soft.

Oh yeah, using carbon. :smiley: Although some folks are pressuring Dave to do stainless.

  • Like 1
Link to comment
Share on other sites

  • 3 months later...

I ordered one as well. I missed the pre order but he messaged me and said a fella backed out so I got a blank slate one and had him do this. Still waiting on black shaft and grip to come in but so far I am happy with it and can't wait to roll it!!!

 

7RPL3GT8TLS3.png

  • Like 1

Titleist TSi2 9* Smoke RDX

Titleist 915fd 15* Smoke

Titleist 816 H2 19* Diamana

Titleist 716 T-MB 4 Iron PX 6.5

Titleist 690 MB 5-PW PX LS 6.0 or PXG 0311 T KBS C-Taper Stiff

Mizuno T20 52 & 56 PX 6.5, 61* S400

Piretti GOAT

Link to comment
Share on other sites

I recently bought a new putter from David. I went with the Anser 2 style in a gun blue finish. I considered some custom stamping, but at the end of the day I generally prefer a simple look. So I went with no custom stamping or paint fill. The owner is a younger guy and lives about 10 minutes from where I am, so I like the idea of supporting a local startup company rather than a more-established brand. He is eager to answer questions and will work with you to build what you want.

From a playability standpoint, I really like the look and weight of the putter. I used it a couple days ago for the first time and had my best putting day in a long time. I’m not sure whether it was purely the putter, but so far so good!

M05KZG23RCR6.jpeg

W8SVH8FNXC1D.jpeg

  • Like 1
Link to comment
Share on other sites

Looks good man!! Mine will be here tomorrow I believe! I also like the idea of giving him my money then a big name person that is already mass producing these things.

Titleist TSi2 9* Smoke RDX

Titleist 915fd 15* Smoke

Titleist 816 H2 19* Diamana

Titleist 716 T-MB 4 Iron PX 6.5

Titleist 690 MB 5-PW PX LS 6.0 or PXG 0311 T KBS C-Taper Stiff

Mizuno T20 52 & 56 PX 6.5, 61* S400

Piretti GOAT

Link to comment
Share on other sites

Very nice, how does it feel? Firm, medium, soft, clicky, dead?

He's posted reviews saying people are saying it's soft but never know. I assume for a carbon putter it's on the softer side.

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

I guess that's all that really matters in the end.

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

  • 3 weeks later...

Jeeze that's super clean. Enjoy that for sure.

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

  • 7 months later...
  • 4 weeks later...

I have just ordered a long neck left handed G6 from David. I love the look of his work and he is super nice to deal with and quick to reply.

I have high hopes as I have always wanted a long neck custom putter. He only has them in Carbon Steel, for those of you who have had a carbon steel putter what apart from rusting are the main differences from normal stainless steel?

 

Many thanks

Link to comment
Share on other sites

Definitely thinking of adding a putter from him either a very simple lefty G6 or his new Tracer which is a symmetrical wide body blade that can be done in several necks and neck locations. Just depends on the weight of the Tracer and if I get an NP2 from someone else. 

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

33 minutes ago, English13 said:

This is my lefty long neck G6 being built by David. He really is great to deal with and I can’t recommend him highly enough. Reasonably priced and I think his putters look fantastic.... Will update when he has finished it......

37E568AE-EFEA-43EF-BE5E-76CB92B4A7FB.jpeg

5822842B-A1BA-44CE-8A78-9AE9B7E52F23.jpeg

E662B0B7-DFBD-4F76-8361-B9A5940D5320.jpeg

676F71DB-AFCC-4B06-8535-927F2FADEEEB.jpeg

E7DAF063-6D04-416B-94D8-3BC20EBEFE6C.jpeg

7F66E369-520D-48D1-B37C-D2560687102C.jpeg

7E60255A-E319-408F-B26D-F29C81E93A53.jpeg

704F89A0-58A7-403C-B732-0E7C85DCEB24.jpeg

96C83BA7-4B11-4131-988D-95286587D1AF.jpeg

 

Can't wait to see it when done, his head shape is nice and priced really well, also like that he charges a few bucks for finishes vs 100+ like some other guys.

 

Also maybe dumb question but you have a RH putter in your profile and a LH here. Do you putt both ways or just one and a fan of Goodwood in general? 

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

2 minutes ago, MattM97 said:

 

Can't wait to see it when done, his head shape is nice and priced really well, also like that he charges a few bucks for finishes vs 100+ like some other guys.

 

Also maybe dumb question but you have a RH putter in your profile and a LH here. Do you putt both ways or just one and a fan of Goodwood in general? 

The picture was a stock photo i got from Kari Lajosi's site when i had a putter made a couple of years ago. I do indeed putt left handed hence why my new one is left handed. I love David's work and his price point, some of the other putter makers are starting to charge silly money.....

Link to comment
Share on other sites

Just now, English13 said:

The picture was a stock photo i got from Kari Lajosi's site when i had a putter made a couple of years ago. I do indeed putt left handed hence why my new one is left handed. I love David's work and his price point, some of the other putter makers are starting to charge silly money.....

 

Gotcha, hard to see the brand the profile pics are small.

 

But I do agree with you on putter prices, I'll always like custom or semi custom milled putters over OTR options, but some of these prices are insane and I generally have to pay 30-60% more for exchange rate, tax and potential duty charges being in Canada. So a putter from David or similar at say around $400 USD when all is said and done is better than $800-1000k. I'd love them both but I can drop money on a Goodwood quicker than a custom costing double unless I can pay bi-weekly until my putter is complete. 

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

Well here is the finished putter. I am delighted with what David has produced... Anyone who is thinking of ordering a putter from him, do so....

You will not find anyone easier to deal with, quick replies and an absolute desire for you to end up with exactly the putter you wanted....

Now the wait as it makes its way to the UK....😃🏌️♂️⛳

E0C11C22-04E3-482D-A599-034E8E644696.jpeg

E5B31797-B74B-4A49-B620-3D67B620CEA2.jpeg

EFA63E80-BA8F-4651-9998-2E3CB5D83DC3.jpeg

D05D3DE7-B3BE-45F5-9663-193203E2520A.jpeg

63C3E0B3-E844-4C5A-959A-778D8D08757C.jpeg

0B03FD64-E77B-40A5-B583-C8358F385082.jpeg

B977E288-6FE2-4FA8-A210-7C798D5D4E91.jpeg

90D2BF79-5762-459F-9878-B8D3E096985C.jpeg

  • Like 3
Link to comment
Share on other sites

3 hours ago, English13 said:

Well here is the finished putter. I am delighted with what David has produced... Anyone who is thinking of ordering a putter from him, do so....

You will not find anyone easier to deal with, quick replies and an absolute desire for you to end up with exactly the putter you wanted....

Now the wait as it makes its way to the UK....😃🏌️♂️⛳

E0C11C22-04E3-482D-A599-034E8E644696.jpeg

E5B31797-B74B-4A49-B620-3D67B620CEA2.jpeg

EFA63E80-BA8F-4651-9998-2E3CB5D83DC3.jpeg

D05D3DE7-B3BE-45F5-9663-193203E2520A.jpeg

63C3E0B3-E844-4C5A-959A-778D8D08757C.jpeg

0B03FD64-E77B-40A5-B583-C8358F385082.jpeg

B977E288-6FE2-4FA8-A210-7C798D5D4E91.jpeg

90D2BF79-5762-459F-9878-B8D3E096985C.jpeg

 

That's a sweet looking stick. I asked David the weight on that and he said 355g which isn't bad. I know if I order a Goodwood I'd definitely have to slap some lead tape on the sole for me.

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

So I got bored and laid out/priced my build for a lefty G6, not gonna pull the trigger just yet. Want to see if I can just get the head shipped to me as I have shafts and grips and would rip out what would come with it anyways. 

 

Will see if I get bored and/or have some spare cash and pull the trigger on it. 

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

59 minutes ago, MattM97 said:

So I got bored and laid out/priced my build for a lefty G6, not gonna pull the trigger just yet. Want to see if I can just get the head shipped to me as I have shafts and grips and would rip out what would come with it anyways. 

 

Will see if I get bored and/or have some spare cash and pull the trigger on it. 

I'm sure David would ship you just the head I think it is a .370 tip shaft

Titleist TSi2 9* Smoke RDX

Titleist 915fd 15* Smoke

Titleist 816 H2 19* Diamana

Titleist 716 T-MB 4 Iron PX 6.5

Titleist 690 MB 5-PW PX LS 6.0 or PXG 0311 T KBS C-Taper Stiff

Mizuno T20 52 & 56 PX 6.5, 61* S400

Piretti GOAT

Link to comment
Share on other sites

Just now, luke1333 said:

I'm sure David would ship you just the head I think it is a .370 tip shaft

 

I'll ask closer to when I'm ready to pull the trigger. I just went through his build page and didn't like the shafts he offered and I have a pile of grips I can use. Plus cheaper to ship a head vs a whole putter. 

 

But I'm going to keep looking at his page to see if a certain finish, milling, color combo catches my eye. I'm kinda on the fence for paint fill which is stopping me. 

Lefty

Driver: 9° Ping G410 Plus - HZRDUS RDX Smoke Blue 6.0

3W: 13.5° Ping G410 LST - Aldila NV 2KXV Green 75X

3H: 19° Ping G410 - Tensei CK Pro Orange 90TX

Irons: 4i - 7i Srixon 585 / 8i - PW Srixon 785 - AMT Tour White S300

Wedges: 51° MD3 - 56° Glide 2 - 60° PM2

Putter(s): TP Mills Handmade - Kingdom Putter - NCW Boyd - and more. 

WITB Thread

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Our picks

    • 2021 Fortinet Championship - Discussion and Links
      Please put and questions or comments here
       
       
      2021 Fortinet Championship - Tuesday #1
      2021 Fortinet Championship - Tuesday #2
      2021 Fortinet Championship - Tuesday #3
      2021 Fortinet Championship - Tuesday #4
      2021 Fortinet Championship - Tuesday #5
      2021 Fortinet Championship - Tuesday #6
      2021 Fortinet Championship - Tuesday #7
      2021 Fortinet Championship - Tuesday #8
       
       
      New Ping putter - 2021 Fortinet Championship
      New Bettinardi putters & Cover - 2021 Fortinet Championship
      Ping Putters - 2021 Fortinet Championship
      Odyssey putters - 2021 Fortinet Championship
      Cameron putter and new ball marker - 2021 Fortinet Championship
       
       
      Sneds - WITB - 2021 Fortinet Championship
      Peter Uihlein - WITB - 2021 Fortinet Championship
      Charles Howell, III - WITB - 2021 Fortinet Championship
      Scott Piercy - WITB - 2021 Fortinet Championship
      Brandan Steele - WITB - 2021 Fortinet Championship
      Mito Pereira - WITB - 2021 Fortinet Championship
      Kevin Tway - WITB -2021 Fortinet Championship
      Joseph Bramlett - WITB - 2021 Fortinet Championship
       
       
       
      • 19 replies
    • 2021 Tour Championship - Discussion and Comments
      Please put any questions or comments here
       
       
       
       
      Odyssey putters - 2021 Tour Championship
      LA Golf putter shafts - 2021 Tour Championship
       
       
       
      • 25 replies
    • 2021 BMW Championship - Discussion and Links
      Put any questions of comments here
       
       
      2021 BMW Championship - Tuesday #1
      2021 BMW Championship - Tuesday #2
      2021 BMW Championship - Tuesday #3
      2021 BMW Championship - Tuesday #4
      2021 BMW Championship - Tuesday #5
      2021 BMW Championship - Tuesday #6
      2021 BMW Championship - Tuesday #7
       
       
      Cameron T-11 & T-11.5 putters at 2021 BMW Championship
      Mizuno Pro FliHi and 225 irons - 2021 BMW CHampionship
       
       
       
      • 18 replies
    • 2021 Ping i59 irons & Glide Forged wedges in hand comparison pics!!!
      In hand pics of the new 2021 Ping i59 irons and Glide Forged wedges...
       

       
      Ping i59 7 iron
       

       
       
      Ping i59 PW
       

       
      Ping i59 Comparison Photos

       

       

       

       
       
       
       
      PING Glide Forged Wedges

       
      Ping Glide Eye Toe Wedge
       
        • Thanks
        • Like
      • 99 replies
    • 2021 The Northern Trust - Discussion and Links
      Please put any questions or comments here
       
       
       
      2021 The Northern Trust - Tuesday #1
      2021 The Northern Trust - Tuesday #2
      2021 The Northern Trust - Tuesday #3
      2021 The Northern Trust - Tuesday #4
      2021 The Northern Trust - Tuesday #5
      2021 The Northern Trust - Tuesday #6
      2021 The Northern Trust - Tuesday #7
       
       
      New Cameron for JT - 2021 The Northern Trust
      New Cameron putters for Garrick Higgo - 2021 The Northern Trust
      New Odyssey putter covers - 2021 The Northern Trust
       
       
      • 6 replies

×
×
  • Create New...