Jump to content

Taylormade P7MC and P770 2020


Recommended Posts

  • Replies 1.8k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Hey all, I know you're frustrated with delivery dates on the new irons, but golf was closed at the time we placed orders for the first wave of these products and as soon as golf opened again and we st

all of you guys complaining about your pre-orders really need to stop. The clubs have far exceeded their expectations in sales, and no matter what happens when you have a successful launch, there

Well got in my first round with the P770 2020 irons today(18 holes and an hour of range time) and thought I'd share some things I experienced today..I play anywhere from a 5 to a 9 with my driver bein

Posted Images

On 9/8/2020 at 12:09 PM, nikeblades00 said:

Thats crazy that you are just as long as your 790s. Some of the appeal of the 770s was more traditional lofts.

This is one of the reasons I just pulled the trigger on a set of P7MCs instead of 770s. I have the 790s, gave them to my brother who's newer to golf. The control was the deciding factor. Tighter front to back dispersion. Can't wait for them to come in this weekend!

Driver TBD

Woods TBD

Irons TBD

Rory McIlroy "RORS" 61 Hi-Toe & 56 Hi-Toe

Rory McIlroy "RORS" Scotty Cameron

Link to post
Share on other sites

I am surprised the MC doesn't get more love, I recently tested it for the first time and was very impressed with performance and feel 

Driver = Taylormade SIM 8* Hzrdus green 6.0

1 iron = Titleist U510 Hzrdus smoke 6.0
3 iron = Titleist U500 Hzrdus smoke 6.0
Irons = Wilson Staff FG59,  4-PW
Wedges = Bettinardi HLX 3.0 52*

                   Taylormade 56* and 60* MG2

Putter = Odyssey white hot pro 1WS 

Ball = Mizuno RB Tour

Link to post
Share on other sites
19 minutes ago, craz-e said:

I am surprised the MC doesn't get more love, I recently tested it for the first time and was very impressed with performance and feel 

 

I thought it was awesome, probably the best looking players cavity? For me they had a surprising amount of pop for an iron its size but I couldn't get the spin down, and they are for sure way less forgiving when you put them beside a ZX7 or a 921 Tour even.

  • Like 1

D - Epic Speed | Ventus Blue 6X

3W - TSi3 | Tensei Raw Blue 7TX

3H - Apex Pro | AD DI 8X

4-PW - X Forged CB | DG TI X100

50 - SM8.12 F | DG TI S400

55 - SM8.10 S | DG TI S400

60 - SM8.08 M | DG TI S400

P - Phantom X 5.5/White Hot OG 7/Special Select NP2

B - ProV1x

B - Hoofer

Link to post
Share on other sites

I finally got my 770 set this week. Ordered in mid December so I have been waiting patiently. I am coming from Z585 set with Ctaper 130x shafts and ordered C taper 120 in my 770 set. I have been happy with the feel/dispersion/spin of this set up in the limited play this week. Feel like I retained the dispersion I had with the Ctaper130 but gained a little more height and spin. Not sure if that is completely due to the change in weight/flex of shaft or the difference in loft/launch of the club heads. I did not lose any distance, still hit my 8 iron into the 162yrd par 3 at my home course as I would with my previous set, which was a good sign. Overall I am happy with the change, the Srixon VT sole was not for me and I prefer the turf interaction of the 770s. While they are a little less forgiving on my toe misses, they hold their line pretty well. Coming up short on mishits I can deal with. 

Driver: Taylormade SIM2 Max - Accra TZ5 75 M5

3 Wood:  Taylormade SIM Ti - Accra TZ6 85 M5

Hybrid:  Taylormade DHY - Diamana Thump 100x

Irons:  Taylormade P770 4-PW  - KBS C Taper 125S+

Wedges: Taylormade MG2 51/10, 56/12, 60/10 - KBS 610 125S+

Putter: TM Spider X Chalk 

Link to post
Share on other sites
  • 2 weeks later...

Any more updates?  we are hitting 50-60 degree weather even in the northeast so most people must be having the warm days.. 🙂  I hope to bring the P7MCs outside this week...  

DRIVER: TaylorMade R1 10.5° Stock Shaft Regular Flex

3/4 WOOD: TaylorMade Rballz 14°HL Stock Shaft Regular Flex

IRONS 3-PW: TaylorMade P7MC Nippon Modus Tour 105S

GW: TaylorMade Milled Grind 2 52.09 Nippon Modus Tour 105S

SW: TaylorMade Milled Grind 2 56.12 Nippon Modus Tour 105S

LW: TaylorMade Milled Grind 2 60.08 Nippon Modus Tour 105S

Putter: TaylorMade Daytona 12 traditional bladed putter

BALL: Callaway Chrome Soft and Titleist ProV1

Link to post
Share on other sites

seems like 2 months is the norm from your order date.. 

 

TM said there is a shaft shortage.. i thought it was just for some shafts.. but clearly now saying its every shaft.. i found my shaft at stores and online so ive tried to change my orders to get just the heads to put on my shafts myself.. but stated its to late to change best to just wait for the complete set.. kinda frustrating .. tournament season starting 2 weeks .. 

Link to post
Share on other sites

Have had my P770s (4-PW) since December and have been very happy with them. Came from OG P790s and while I have to give a majority of the credit to finally being fit into proper shafts (came from Modus 120S to KBS $ Taper R hardstepped), the P770s are just as long as my 790s but feel much better and the distance dispersion seems to be tighter as well.

 

Will say that if I didn't need the extra distance I absolutely would have pulled the trigger on the P7MCs. The MCs may take over my MP-18SCs as the set I grab and hold on to strictly for aspirational purposes. 

SIM 9* Tour AD IZ 6S //  SIM 15* YS NanoReloaded 7S //  SIM 19* Tour AD DI 7S //  P770 KBS $-Taper 110 //  MG2 KBS $-Taper 110 //  Hi-Toe KBS $-Taper 110 //  Spider X SuperStroke 1.0 PT //  TP5X

Link to post
Share on other sites

Picked up my p790/770 set today. 4-5 790 and 6-PW AW 770. I thought the p790’s felt really light so I checked all the swing weights. 770’s all D2-D3. 790’s C8. WTF. Lengths are +3/4”. Nippon neo R 95g shafts. Superstroke 48g 2 wrap standard grips.

With extra length i was expecting swing weight to be more around D4 D5 for all the irons. Hit into the net and the 770’s felt fine at their weight but 790’s at C8 I’m not so sure. How could they be so light? Did they forget to add the tungsten when they built the heads? I’m taking them out on the course tomorrow. Lead tape might be on order.
 

Anyone else have this problem?
 

 

Edited by Jim E
Link to post
Share on other sites

My 770s were light, I had them reshafted at Club Champion and had them all built to D4.

TaylorMade SIM2 10.5*, Ventus Black 6X 
TaylorMade SIM2 3W 15*, Ventus Blue 7X
TaylorMade SIM2 3H 19.5*, Ventus Blue 9X

TaylorMade P770 4-5, P7MC 6-PW, DG TI X100
TaylorMade MG2 50, 54, 58, DG TI S400

TaylorMade Spider X

 

Link to post
Share on other sites
39 minutes ago, Jim E said:

Played 9 yesterday. 770’s at D2 was fine. 790’s at C8 little light. I don’t like the idea of shaft weights. I’d prefer the weight to be in the head. I’ll probably just slap some lead tape on. Or just return the 790’s for something else.

I’ve still not hit a ball with mine after having received the in early Jan due to England Lockdown, but I’m pretty sure I already need to regroup them from all  the waggles I’ve done with them sat in my office with me.

 

Just checked SW on my 790/770’s


I make them D2.5 on 4-7 790s and 8&9 770’s

 

i then make the PW and AW D4

 

PW and AW were delivered a month ahead of the rest

 

All are modus 120, 1/2” longer.

mall measure on my Golfworks basic SW balance - so not sure how accurate they are, but are of course ‘accurate’ from measure to measure. 

 

Just cannot wait for 29th March when we are allowed out again....

Link to post
Share on other sites
1 hour ago, Re*Ax said:

I’ve still not hit a ball with mine after having received the in early Jan due to England Lockdown, but I’m pretty sure I already need to regroup them from all  the waggles I’ve done with them sat in my office with me.

 

Just checked SW on my 790/770’s


I make them D2.5 on 4-7 790s and 8&9 770’s

 

i then make the PW and AW D4

 

PW and AW were delivered a month ahead of the rest

 

All are modus 120, 1/2” longer.

mall measure on my Golfworks basic SW balance - so not sure how accurate they are, but are of course ‘accurate’ from measure to measure. 

 

Just cannot wait for 29th March when we are allowed out again....

It just seems very odd that my 4 and 5 790’s are C8 with 3/4” longer shafts. When they state swing weight as D2. I assume to get the D2 they’re just glueing head to the shaft with nothing added. How the heck can mine be C8? If I ordered standard length they would have come to me at like C3 C4? WTF! If I  hit these slightly towards the toe it’s harsh and goes nowhere. Seriously wondering if they forgot to put the tungsten weight in. Very disappointed. I guess I’m lucky the 770’s came at D2. For the prices they charge this is very upsetting. Especially after waiting 2 months.

Link to post
Share on other sites
6 hours ago, Jim E said:

It just seems very odd that my 4 and 5 790’s are C8 with 3/4” longer shafts. When they state swing weight as D2. I assume to get the D2 they’re just glueing head to the shaft with nothing added. How the heck can mine be C8? If I ordered standard length they would have come to me at like C3 C4? WTF! If I  hit these slightly towards the toe it’s harsh and goes nowhere. Seriously wondering if they forgot to put the tungsten weight in. Very disappointed. I guess I’m lucky the 770’s came at D2. For the prices they charge this is very upsetting. Especially after waiting 2 months.

I know when I got a set of P7mc's I took off the heads and removed the bullet weights that are found in the hosel, they're almost hidden.  Anyways, I play at .50 or a little above but with removing a 10g weight I was still only down around d2-d3 range.  Let us know if you ever find out what happened.

Taylormade Sim2 Accra RPG 462 M4+

Callaway Epic speed 15* Accra Rpg 382 M5 

PXG 19*  Accra Tz5 85

Wilson Staff mode CB  5-pw  DG 120 X100 ss1x

Wilson Staff wedge 54/58  

Betti  BBf1 

 

 

Link to post
Share on other sites
14 minutes ago, Oett11 said:

I know when I got a set of P7mc's I took off the heads and removed the bullet weights that are found in the hosel, they're almost hidden.  Anyways, I play at .50 or a little above but with removing a 10g weight I was still only down around d2-d3 range.  Let us know if you ever find out what happened.

I brought them back to the shop I ordered from. We’ll see what happens. Also the 5 iron was only an 1/8” longer than the 6 iron. All ordered with same specs. I think next time I need new irons I’ll stick to the used market. It’s amazing to me companies can stay in business when they push s*** out the door like this. 

Link to post
Share on other sites
1 minute ago, Jim E said:

I brought them back to the shop I ordered from. We’ll see what happens. Also the 5 iron was only an 1/8” longer than the 6 iron. All ordered with same specs. I think next time I need new irons I’ll stick to the used market. It’s amazing to me companies can stay in business when they push s*** out the door like this. 

Clubs said “heads made in Vietnam assembled in Mexico”. Probably sweat shops with kids building clubs that don’t even know what golf is. 

Link to post
Share on other sites

so ive gotten about 3/4 rounds since December when I finally got my irons.

 

I really love the P7MC's but not too fond of the p770s.  Wish I had originally ordered all my irons in the MC's.

 

770s are just to artificial feeling, really dislike the clicky sound. 

My WITB:

Team NIKE

TM Sim - PX Green Hulk PVD 6.5

TM Sim Rocket - AD-BB 8x

TM UDI - Tensei Pro White 100TX

TM P770/P7MC - Nippon Modus3 120TX

Titleist Vokey SM6 Raw (50, 54) - DG S400

TM HiToe 60 - DG S400

Toulon Design Las Vegas

Link to post
Share on other sites

Hi 

I was fitted for the p770 today. I was fitted for the Dynamic Gold 105 stiff shaft.

however, I was only able to try different shafts in the 7-iron. Tried the DG 105 and KBS Tour stiff and couldn’t really tell a difference. I also tried a 4-iron with the KBS shaft only since he couldn’t change the shaft, and I hit the 4-iron perfectly.

So now I’m confused as to whether the fitter was right in recommending me for the DG shaft....

Has anyone been fitted to the DG shaft and want to share their experience with me? 
I’m a 7 handicap and have been playing with the same irons for 8 years...

kind regards, Jeppe 

Link to post
Share on other sites

So I was able to get the P7MCs to the range on Saturday for an extensive range session with the irons and all i can say is I am SO happy with them and glad I got my set in 2020 as the delays and back orders are just as bad now as they were back then if not worse. As for the clubs, I was crushing shots and the feel is amazing. No crazy sounds in fact they are not that loud outside unless you toe it a bit and then its a brighter sound, on pure hits it felt really soft and buttery even on the 3 iron (butter knife).  I can't wait to take them out again. Anyone else getting out to the range or the course?  On Saturday my range was so packed there was only 2 open stations available when I arrived.  

DRIVER: TaylorMade R1 10.5° Stock Shaft Regular Flex

3/4 WOOD: TaylorMade Rballz 14°HL Stock Shaft Regular Flex

IRONS 3-PW: TaylorMade P7MC Nippon Modus Tour 105S

GW: TaylorMade Milled Grind 2 52.09 Nippon Modus Tour 105S

SW: TaylorMade Milled Grind 2 56.12 Nippon Modus Tour 105S

LW: TaylorMade Milled Grind 2 60.08 Nippon Modus Tour 105S

Putter: TaylorMade Daytona 12 traditional bladed putter

BALL: Callaway Chrome Soft and Titleist ProV1

Link to post
Share on other sites
3 hours ago, Magnificat said:

So I was able to get the P7MCs to the range on Saturday for an extensive range session with the irons and all i can say is I am SO happy with them and glad I got my set in 2020 as the delays and back orders are just as bad now as they were back then if not worse. As for the clubs, I was crushing shots and the feel is amazing. No crazy sounds in fact they are not that loud outside unless you toe it a bit and then its a brighter sound, on pure hits it felt really soft and buttery even on the 3 iron (butter knife).  I can't wait to take them out again. Anyone else getting out to the range or the course?  On Saturday my range was so packed there was only 2 open stations available when I arrived.  

Man, I would love to be able to show up to a range and have two open stations. Mine has been 20-45 min wait for an open stall pretty much all day every day the past 9 months. I tried to go Friday afternoon and the line snaked out into the parking lot. 


 

Tsi3 9* Ventus Black 6S
SIM Ti 3 wood, stock shaft
Mizuno CLK 19* Tensei White 90tx
PING G425 hybrid *22 Accra TZ5 95 M4
PING i210 5-PW MMT 105tx
Zipcore Black 50, 54 Full
Fourteen RM4 60H
Newport 2 

Link to post
Share on other sites
On 2/25/2021 at 12:15 PM, JoeJoeJoeUrBoat said:

This is one of the reasons I just pulled the trigger on a set of P7MCs instead of 770s. I have the 790s, gave them to my brother who's newer to golf. The control was the deciding factor. Tighter front to back dispersion. Can't wait for them to come in this weekend!

Did you get your MCs yet?  I can't stop raving how much I am enjoying them.  I hit them far better than my old clubs, even the dreaded 3 iron... 

DRIVER: TaylorMade R1 10.5° Stock Shaft Regular Flex

3/4 WOOD: TaylorMade Rballz 14°HL Stock Shaft Regular Flex

IRONS 3-PW: TaylorMade P7MC Nippon Modus Tour 105S

GW: TaylorMade Milled Grind 2 52.09 Nippon Modus Tour 105S

SW: TaylorMade Milled Grind 2 56.12 Nippon Modus Tour 105S

LW: TaylorMade Milled Grind 2 60.08 Nippon Modus Tour 105S

Putter: TaylorMade Daytona 12 traditional bladed putter

BALL: Callaway Chrome Soft and Titleist ProV1

Link to post
Share on other sites

For anyone waiting on their orders I placed mine end of January and they were just delivered yesterday, actually a little earlier then expected so TM must be ramping up their assembly.  P770 w/KBS $-Taper Lite. Took them straight to range and they are better then I remember. I was nervous after being fit indoors in the middle of winter but it seems like everything was spot on.  These clubs flat out launch the ball, first thing I noticed being outdoors is the ball speed, the ball takes off like a rocket, seems to keep climbing and then drop perfectly.  I remember the peak height numbers from the fitting but it’s tough to visualize from a simulator, after seeing it outside...it’s freaking high, but not ballooning and can still be easily knocked down when needed.  The other big thing I noticed is these clubs want to go straight, but that’s probably a good thing for most hacks like me.  You can still turn them over either way it just takes a little extra effort,I.e. I play a 10 yard cut/draw and maybe it only moves 5yards, big whoop I just look at that like needing to relearn my distances and big motivation to NOT try and hit a 30 yard draw out the trees.  Hit around 100 balls and didn’t notice 1 “flyer”, a few misses off the tow or a little thin didn’t seem to be punished too bad. 10/10 would recommend these clubs.

  • Like 1
Link to post
Share on other sites

Had a chance about a month ago to hit the P770 and P7MC.  Didn't hate the feel of the P770 but didn't love it either.  My Srixon ZX7 feel much better and the flight/distance was very similar.  The P7MC was completely different.  Absolutely LOVED the feel off those irons.  I hadn't warmed up and wasn't flushing them perfectly but the feel off the club face was fantastic.  I'd guess they had a bit more spin to them just from the flight but I noticed front-to-back dispersion was tight.  Didn't care for the KBS Tour shafts personally.  If I was to build out a set I'd probably go P770 in the 4/5 irons and P7MC the rest of the way down to PW.

Link to post
Share on other sites
20 hours ago, Silverstang38 said:

For anyone waiting on their orders I placed mine end of January and they were just delivered yesterday, actually a little earlier then expected so TM must be ramping up their assembly.  P770 w/KBS $-Taper Lite. Took them straight to range and they are better then I remember. I was nervous after being fit indoors in the middle of winter but it seems like everything was spot on.  These clubs flat out launch the ball, first thing I noticed being outdoors is the ball speed, the ball takes off like a rocket, seems to keep climbing and then drop perfectly.  I remember the peak height numbers from the fitting but it’s tough to visualize from a simulator, after seeing it outside...it’s freaking high, but not ballooning and can still be easily knocked down when needed.  The other big thing I noticed is these clubs want to go straight, but that’s probably a good thing for most hacks like me.  You can still turn them over either way it just takes a little extra effort,I.e. I play a 10 yard cut/draw and maybe it only moves 5yards, big whoop I just look at that like needing to relearn my distances and big motivation to NOT try and hit a 30 yard draw out the trees.  Hit around 100 balls and didn’t notice 1 “flyer”, a few misses off the tow or a little thin didn’t seem to be punished too bad. 10/10 would recommend these clubs.

When were they supposed to arrive? I ordered my set of 770's middle of February and when I checked a couple of weeks ago I was told they would arrive the beginning of May. I had to change the shaft or else I was looking at a June arrival. Fingers crossed that they come sooner as I am heading to Williamsburg, VA for a golf trip at the beginning of May, but I wont get my hopes up.

Link to post
Share on other sites
2 hours ago, cer5059 said:

When were they supposed to arrive? I ordered my set of 770's middle of February and when I checked a couple of weeks ago I was told they would arrive the beginning of May. I had to change the shaft or else I was looking at a June arrival. Fingers crossed that they come sooner as I am heading to Williamsburg, VA for a golf trip at the beginning of May, but I wont get my hopes up.

I ordered through PGATSS and were supposed to ship 4/15, but I had been calling every week hoping for a surprise.  Checked 3/19 and they we still scheduled for 4/15 but call on 3/30 and was told they were out for delivery.  It seems like TM is building everything quick and it just depends how backordered certain parts are.

Link to post
Share on other sites
2 hours ago, Silverstang38 said:

I ordered through PGATSS and were supposed to ship 4/15, but I had been calling every week hoping for a surprise.  Checked 3/19 and they we still scheduled for 4/15 but call on 3/30 and was told they were out for delivery.  It seems like TM is building everything quick and it just depends how backordered certain parts are.

That's good to know, there might be some hope! I ordered mine from GG on 2/13. I changed from KBS shafts to PX shafts because the KBS were so far out. I think the heads were holding up my order now so hopefully they'll get shipped out sooner!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   1 member

  • Our picks

    • 2021 RBC Heritage - discussions and links
      Please post any questions and comments here.
       
      2021 RBC Heritage - Tuesday #1
      2021 RBC Heritage - Tuesday #2
      2021 RBC Heritage - Tuesday #3
      2021 RBC Heritage - Tuesday #4
      2021 RBC Heritage - Tuesday #5
      2021 RBC Heritage - Tuesday #6
      2021 RBC Heritage - Tuesday #7
      2021 RBC Heritage - Tuesday #8
      2021 RBC Heritage - Tuesday #9
      2021 RBC Heritage - Tuesday #10
       

       
      2021 RBC Heritage - Tuesday #1
      2021 RBC Heritage - Tuesday #2
      2021 RBC Heritage - Tuesday #3
      2021 RBC Heritage - Tuesday #4
      2021 RBC Heritage - Tuesday #5
      2021 RBC Heritage - Tuesday #6
      2021 RBC Heritage - Tuesday #7
      2021 RBC Heritage - Tuesday #8
      2021 RBC Heritage - Tuesday #9
      2021 RBC Heritage - Tuesday #10
       
       

       
      Custom Cameron putters - 2021 RBC Heritage
      Bettinardi putter - 2021 RBC Heritage
      Robert Streb's custom stamped Vokey wedge - 2021 RBC Heritage
      Ben An's custom stamped Vokey - 2021 RBC Heritage
        • Like
      • 6 replies
    • 2021 Valero Texas Open - discussion & links
      Please put any questions or comments here. 
       
      This week, the PGA Tour is at TPC San Antonio on the Oaks Course for the Valero Texas Open. GolfWRX was on-site Tuesday to catch a glimpse into the bags of some of the world’s top golfers.
       
      The field of 144 is getting ready to battle starting Thursday for the $7.7 million purse, with $1.386 million going to the winner. The tournament is also the last event where players can qualify for The Masters, just like Canadian Corey Conners did last year.
       
      Check out our "Most interesting photos" Part 1, and Part 2.
       

       
      2021 Valero Texas Open - Tuesday #1 2021 Valero Texas Open - Tuesday #2 2021 Valero Texas Open - Tuesday #3 2021 Valero Texas Open - Tuesday #4 2021 Valero Texas Open - Tuesday #5 2021 Valero Texas Open - Tuesday #6 2021 Valero Texas Open - Tuesday #7 2021 Valero Texas Open - Tuesday #8  


       
      Cameron putters (added Bernd Wiesberger's custom T-11) -2021 Valero Texas Open Piretti putters -2021 Valero Texas Open Branden Grace testing AutoFlex shaft @ 2021 Valero Texas Open  
      Check out our "Most interesting photos" Part 1, and Part 2.
       

       
        • Like
      • 29 replies
    • **GIVEAWAY** Odyssey Ten Triple Track Putter! ENTER NOW!
      NEW Odyssey Ten Triple Track putter giveaway!!!.To enter reply in this thread that you're IN!
       
      That's it. You'll be entered into the giveaway (one entry per person). Winner chosen at random in two weeks. Be sure to check out the attached pics. Good luck!
       
      If you are not a member her please register here to allow you to reply to this post and enter. Registration is free... https://forums.golfwrx.com/register/
      ======================================================================================================
      We randomize all the number of posts and the #1 number on the top is the winner. Say there is 1,000 replies from members. We will randomize 1 to 1,000 using a website that has a randomizer. It scrambles the numbers and the #1 is the first place and the #2 is the second etc. If the winner has duplicate entries we count the first
       





       
      • 1,599 replies
    • 2021 WGC Dell Technologies Match Play - discussion and links
      Please put any questions or comments here
       
       

       
      2021 WGC Dell Technologies Match Play - Monday #1
      2021 WGC Dell Technologies Match Play - Monday #2
      2021 WGC Dell Technologies Match Play - Monday #3
      2021 WGC Dell Technologies Match Play - Monday #4
      2021 WGC Dell Technologies Match Play - Monday #5
      2021 WGC Dell Technologies Match Play - Monday #6
       
       

       
      Hideki testing putters at WGC Dell Technologies Match Play
      Odyssey/Toulon Atlanta putter - 2021 WGC Dell Technologies Match Play
      Cameron putters - 2021 WGC Dell Technologies Match Play
      Patrick Reed testing TPT shafts 2021 WGC Dell Technologies Match Play
       
       
      • 54 replies
    • 2021 Players - discussion and links
      Please post any questions or comments here
       
       

       
      2021 Players - Monday #1
      2021 Players - Monday #2
      2021 Players - Monday #3
      2021 Players - Monday #4
      2021 Players - Tuesday #1
      2021 Players - Tuesday #2
      2021 Players - Tuesday #3
      2021 Players - Tuesday #4
      2021 Players - Tuesday #5
      2021 Players - Tuesday #6
       
       

       
      Maverick McNealy's custom 1 of 1 Callaway Apex MB irons - 2021 Players
      Adam Long's Cameron T-5 proto - 2021 Players
      Abraham Ancer's custom Muira irons and custom MMT shafts - 2021 Players
      Bettinardi putters & cover - 2021 Players
      Jon Rahm's bag - 2021 Players
      Xander Schauffele's bag - 2021 Players
      Sergio with a Cameron putter - 2021 Players
      Cameron T11 & 11.5 putters - 2021 Players
      Sergio Garcia's clubs - 2021 Players
      Scott Brown's Odyssey gamer - 2021 Players
       
       
       
      • 52 replies

×
×
  • Create New...