Rickie Fowler-RF Proto REV 33-Coming to Retail?

[halfsumo]

I would be interested if they had a thinner top line and less offset. 😄

[rnolan79]

Fairway Jockey is letting you build a custom set as long as you order 4-pw. Must resist must resist! With custom options I was over 3k when building the set. 

[golfmatt]

So all the talk of no customisation was wrong, on cobra site you can adjust, shaft, loft, lie, length & grip. Doesn't make them any better value but good to see.

[GarretG]

On 10/19/2020 at 4:38 PM, Golfingfanatic said:

You know what's funny?

That's the wrong grip, shaft and clubhead if you'd actually want the irons Rick plays.

Hard to keep track with him always Tinkering his set 😕

[GarretG]

44 minutes ago, halfsumo said:

I would be interested if they had a thinner top line and less offset. 😄

I have a set of mint kitchen knives I could ship you? 😂

[StiffShaft]

.64 mm offset for the whole set.  when are they releasing the cheap non milled version?  i cant do 2.5k

[elwhippy]

If they are so good why is RF dropping down the rankings? 

[QuigleyDU]

47 minutes ago, golfmatt said:

So all the talk of no customisation was wrong, on cobra site you can adjust, shaft, loft, lie, length & grip. Doesn't make them any better value but good to see.

Interesting all the changes here. 

Edited January 25, 2021 by QuigleyDU

[eddiebigeddie]

Just now, QuigleyDU said:

It wont let you change anything.. It shows options but does not allow it. 

You have to select Custom under product configuration (Cobra's website)

[StrokesGainedBreakfastBall]

I really like the Copper PVD finish on these.  If you could choose another set of blades to apply the copper PVD to, which set would it be?  I would go with Titleist 620 MB's.  Or the CNCPT-02.

[Buzzkill]

18 minutes ago, eddiebigeddie said:

You have to select Custom under product configuration (Cobra's website)

Just priced them out with my specs (graphite), $2800 before tax & shipping!

[eddiebigeddie]

9 minutes ago, Buzzkill said:

Just priced them out with my specs (graphite), $2800 before tax & shipping!

Well luckily they have free shipping 😜

[Buzzkill]

36 minutes ago, eddiebigeddie said:

Well luckily they have free shipping 😜

Sweet - that might be the deciding factor for me then!

[The4TH]

47 minutes ago, Buzzkill said:

Just priced them out with my specs (graphite), $2800 before tax & shipping!

For that MMT shaft to be exact same combo as Rickie 🙂 

[Nard_S]

3 hours ago, golfmatt said:

So all the talk of no customisation was wrong, on cobra site you can adjust, shaft, loft, lie, length & grip. Doesn't make them any better value but good to see.

I edited my comment, I only will say customization as defined by Miura is quite different than that of most OEM's.

Edited January 25, 2021 by Nard_S

[rnolan79]

If they keep the profile the same on the new blades and the difference is the milling then it really is a no-brainer. The finish really makes these pop but what I really love is the non-tapered hosel. I just can't make myself spend that much when it is not a custom grind project that is exactly to my specs. 

[Kaexo]

Going to be alot of these for sale on the BST in a few weeks when people realize they can't hit them. There is blades then there is butterknives.

 

I will take Rory's advice and say if he can't hit them then I don't need even try.

Edited January 25, 2021 by Kaexo

[TheMoneyShot]

2 hours ago, QuigleyDU said:

Interesting all the changes here. 

The CPG rep in my area still says they cannot be customized🤦‍♂️

[QuigleyDU]

4 minutes ago, TheMoneyShot said:

The CPG rep in my area still says they cannot be customized🤦‍♂️

Club pro guy??

[TheMoneyShot]

Just now, QuigleyDU said:

Club pro guy??

No, it’s our area CPG rep.  

[QuigleyDU]

1 minute ago, TheMoneyShot said:

No, it’s our area CPG rep.  

I was joking. CPG, Club pro guy. I know its cobra, puma. Sorry joke only I laughed at I guess. haha. 

[Nard_S]

Kind of surprised by .370" bore. Not a bad thing imo, I'm fond of descending weight shafts (S400U), the tungsten in the toe will make these much more CB like in hit zone. Less Hogan Precision, more Nike VR Pro II.

[Rory4Pres]

Still available. Fair to say these didnt sell out by noon as some had guessed.

 

They really should be $1699-1899. The other $600+ is for the fancy box and picture of Rickie to hang by your family photos on the stairway. 

[The4TH]

Quite expensive for some to buy it and hang on the wall as a decoration piece. Way too pretty to hit!

 

Unlike the not-so-pretty 3D putter, still manageable financially to jump on and try something different.

[ddubose]

Also no sales tax if you buy from a shop that doesn’t have a store in your state. 

[TheMoneyShot]

10 hours ago, StiffShaft said:

i cant find them on the cobra site. did the sell out already?

They are on cobras site.

 

https://www.cobragolf.com/rf-proto

[stevemac]

Today at PGA Superstore they had a Forged Tec fitting cart head with this finish-------wow it looked sweet.  Just checked but it is not on the website yet.

[TheMoneyShot]

11 minutes ago, stevemac said:

Today at PGA Superstore they had a Forged Tec fitting cart head with this finish-------wow it looked sweet.  Just checked but it is not on the website yet.

Wonder how this finish will wear over time?

[The4TH]

26 minutes ago, stevemac said:

Today at PGA Superstore they had a Forged Tec fitting cart head with this finish-------wow it looked sweet.  Just checked but it is not on the website yet.

Managed to snap a pic? 🙂 It’s not announced yet.

[Go Horns!]

For $2,500 they should let you have any grip you want. I was going to get them but $70 for grips is where I draw the line.