Show off your gamer!

[IronWolf]

2020 Scotty Cameron special select SquareBack 2, 

standard 70° lie angle, 3 1/2° of loft, 34 inches, the large sensr grip is 124 g, so I added the 20 g bottom weights, original was 15 gr wts, I believe that head is now 360 grams, to counterbalance/raise the swing weight backup. Feels absolutely amazing. especially the grip, I added the red electrical tape for alignment aid to the top edge, gives me an extremely precise center contact patch in the sweet spot.  

[TinCup87]

I think this baby speaks for herself. TEI3 with kbs shaft & studio design grip! 34”

[High Draws Low Fades]

[IronWolf]

6 hours ago, TinCup87 said:

I think this baby speaks for herself. TEI3 with kbs shaft & studio design grip! 34”

OOOOOOoooooo goes the crowd..  golf clap.....🤗

[Phabs]

34 minutes ago, High Draws Low Fades said:

Love this thing.   The fuel finish is what I want from them 

[biliscupidez]

Fujimoto Black Copper

Sm490a steel

 

Fujimoto Gikoh

 

The history of Fujimoto Gikoh begins with a simple, yet apt analogy – a tree with three branches. The three boys who would eventually become the patriarchs of JDM equipment enterprises Kyoei, Miura, and Fujimoto not only grew up in the same small area of western Japan (Ichikawa) – they’re blood-related. The exact lineage isn’t entirely clear, but while they are at least a step removed from siblings, some level of close relation makes sense. Ichikawa is roughly 350 miles west of Tokyo and is typified by a small population with several generations continuing to occupy approximately the same geographic area as predecessors. The familial connection isn’t essential to establish credibility, but because there’s an element of truth it, it’s both novel and interesting for those who fancy themselves experts on all things JDM.

 

As a company, the history of Fujimoto Ginkoh dates to the early 1960s when Japan was working to recover from WWII. During the war period, gifted blacksmiths – technically swordsmiths – were directed by the government to focus their skills on making weapons for the war effort. Making anything else – namely forged golf equipment – was banned by the Japanese government. Katanas and other swords held value as sacred art treasures for the Japanese, and in the secondary collectible market, which still exists to some degree today, a sword’s value depended largely upon the artisan of record. Though rare, some blades reached into the mid-six figures at auction with entire collections selling for several million dollars.

[Joe Jordan]

[JahSteve]

On 12/24/2020 at 9:13 AM, Warrick said:

Garage Portland 

tour satin black with blue and white paint fill

34”

1 flat

40g tungsten plate

black steel shaft

slant neck

Lamkin deep etch blue + 2 wraps 

 

 

Really want one of these!  only available in RH... Im a lefty... 

[MattM97]

20 hours ago, High Draws Low Fades said:

 

They really can make a nice putter, now only if they can respond to an email. 

[Phabs]

On 1/3/2021 at 4:51 PM, TinCup87 said:

I think this baby speaks for herself. TEI3 with kbs shaft & studio design grip! 34”

Really really nice...

[N8dogg2669]

2020 Scotty Cameron Newport 

 

[cjr534s]

Been playing this Scotty Cameron NPII for a long...  Long.. time..  

35"

340 Gram head

[Yzmerf]

Haven’t actually got to game it yet but i have a feeling it will be in my bag for a while

[Jaygolf37]

One-Off or T-issue Taylor made TP Collection Berwick with L-neck.  365g.  68 lie + loft of 4 degrees.  Length is 34 inches, but I grip down an inch on the SS+ grip.  Weights give it a small amount of toe-hang.

Edited January 11, 2021 by Jaygolf37

[memphishorn]

Nothing fancy. 2019 Newport Select 35” bent 2 degrees flat with standard SC grip

[Jonesy]

Here we go...

 

Ping Scottsdale something or other... the headcovers a nightmare

Loft - No idea, probably standard

Lie - who knows

Length - 33" probably the only spec I do know

Headweight - about right, might throw on another strip of lead tape

Grip - Golf Pride something

Been in and out of the bag since 2013? currently in the bag cause it's holing everything...

 

[03trdblack]

16 minutes ago, Jonesy said:

Here we go...

 

Ping Scottsdale something or other... the headcovers a nightmare

Loft - No idea, probably standard

Lie - who knows

Length - 33" probably the only spec I do know

Headweight - about right, might throw on another strip of lead tape

Grip - Golf Pride something

Been in and out of the bag since 2013? currently in the bag cause it's holing everything...

 

 

That's funny!  It's the Ping Scottsdale Half Pipe in case anyone else was curious 🙂

[MattM97]

46 minutes ago, Jonesy said:

Here we go...

 

Ping Scottsdale something or other... the headcovers a nightmare

Loft - No idea, probably standard

Lie - who knows

Length - 33" probably the only spec I do know

Headweight - about right, might throw on another strip of lead tape

Grip - Golf Pride something

Been in and out of the bag since 2013? currently in the bag cause it's holing everything...

 

 

Pretty much sound like how a lot of pros describe their clubs. 

[Jonesy]

11 hours ago, 03trdblack said:

 

That's funny!  It's the Ping Scottsdale Half Pipe in case anyone else was curious 🙂

That's it! Thanks 😆

[Jonesy]

10 hours ago, MattM97 said:

 

Pretty much sound like how a lot of pros describe their clubs. 

I am by no means a pro but I'll accept this 😆

 

I was actually fit for this putter way back when, been bouncing between this and my scotty newport over the years. The scotty has been misbehaving recently so the Ping is back in the bag. For now... 

[MattM97]

6 hours ago, Jonesy said:

I am by no means a pro but I'll accept this 😆

 

I was actually fit for this putter way back when, been bouncing between this and my scotty newport over the years. The scotty has been misbehaving recently so the Ping is back in the bag. For now... 

 

I just meant how you describe it. We go into so much detail about clubs or freak out over the smallest thing like toe hang is not exact, etc. Then you get some pros who go "yeah I like the look of it and roll it well" and we're on here arguing over alignment lines on a putter head. 

[Jonesy]

10 minutes ago, MattM97 said:

 

I just meant how you describe it. We go into so much detail about clubs or freak out over the smallest thing like toe hang is not exact, etc. Then you get some pros who go "yeah I like the look of it and roll it well" and we're on here arguing over alignment lines on a putter head. 

100%, I used to be big into specs and I still appreciate their importance but I've just come to realize it's what I like the look and feel of that matters.

 

Which is a really un-WRXer thing to say... I think I need to go buy a new putter now 😂

 

 

[tjcarsillo]

Some good looking flat sticks in this thread!

[choeppner]

Bettinardi BB-54 with a SuperStroke Wrist Lock Grip. 

[roundersmitty]

My gamer since beginning of 2020 is the Toulon Las Vegas H7 stroke lab.  34”, 2 degrees flat and 2 degrees loft. Swings at D5 like many stroke lab putters from stock specs

 

 

[Stuway08]

Just got an 006 from the Oven

[Phabs]

This will be making into my rotation as the #2 behind my DH89.  Nothing but good things to say about the attention to detail on it.  

[Pepperturbo]

On 12/24/2020 at 7:26 AM, PixlPutterman said:

Must be nice to have a gamer....... I cant make up my mind lol

 

I have commitment issues

These days, lots of people like you. 🤣

[LeftyMatt24]

Settled on this beauty after many failed experiments. Had my lowest three putting rounds ever in my last ten rounds with it. Put my initials on it so I can’t sell it haha 

[Phabs]

4 minutes ago, LeftyMatt24 said:

Settled on this beauty after many failed experiments. Had my lowest three putting rounds ever in my last ten rounds with it. Put my initials on it so I can’t sell it haha 

How’s the stability? Apparently decent if you’ve had your lowest avg 3 putts...