Jump to content

Mitsubishi Tensei AV Raw White Series Prototype 2.0 TX-Flex


Recommended Posts

On 6/8/2021 at 5:15 PM, Mario Good Times said:

So how much did everyone tip this shaft?

No tipping, tsi4 8* set to 7*

 

Making some big swing changes, brought my launch down to 14*, spinning sub 2k pretty consistently, ball speeds ranging up into the mid 190s, avg in the upper 180s.  Not sure what tipping would accomplish for me, good strikes seem pretty optimized.  I guess 70 rpms less spin could add 2 yards to my avg lol

Tsi4

917f2

503h

Mp-67

Vokey

Zipcore

Studio stainless

Link to comment
Share on other sites

1 hour ago, Bdck said:

No tipping, tsi4 8* set to 7*

 

Making some big swing changes, brought my launch down to 14*, spinning sub 2k pretty consistently, ball speeds ranging up into the mid 190s, avg in the upper 180s.  Not sure what tipping would accomplish for me, good strikes seem pretty optimized.  I guess 70 rpms less spin could add 2 yards to my avg lol

 

I've got the one I mess around in new drivers (65tx) with tipped an 1" and then the one in my 3wood (75tx) tipped 1.5" 

 

These are one of the most consistent shafts on the market. I dont actually game it, but I use these shafts for all of my testing, before putting my gamer shaft in anything. 

D - Callaway Epic Speed LS Triple Diamond 9.0* @ All-Fit Upright w/ Aldila SYNERGY Green 75TX Prototype 46.00" (D8)

3W - Callaway Epic Speed 3+ Wood w/ Aldila Synergy Green '19 Proto 80tx 42.50" (D4)

UW - Apex UW 17* w/ VA Shafts Drago 85 FIVE Tipped 1.5" (D4)

5W - Callaway Epic Speed MAX 5 Wood w/ Aldila Synergy Green '19 Proto 80tx 42.00" (D4)

4H - Ping G425 Max w/ Aldila Rogue Black TX, Set to one higher, 42.00" (D4)

2i - Taylormade '19 P790 UDI 2 w/ Project X 6.5 @ 16* 42.00" (D5) || 3i - Taylormade Tour Preferred UDI 3 w/ Project X 6.5 41.50" (D5)

Irons - Taylormade '20 P770s 4-PW w/ Project X LS 6.0, 2* Weak (D5)

Wedges - Athem Koto Prototypes, 50* TR, 54*TR @ 56*, 60*NR @ 62* Wedges w/ Project X LS 6.0 (D6)

Grips - Golf Pride MCC Standard & SuperStroke S-Tech Cord White 1+2 wraps all with Arcoss Smart Sensor Screw-ins

Putter - Cobra 3D Printed Agera Mallet - 34", BGT Stability Carbon, SuperStroke Wristlock Grip w/ Arcoss Tracking

Link to comment
Share on other sites

On 7/15/2021 at 6:36 PM, Kovey10 said:

For anyone who has played both in their driver, how does this shaft in 65TX compare to a Hulk 70g 6.5TX? 


they're both different animals of sorts --- the hulk doesn't have the feel as the 2.0; and IMO launches a little higher than the 2.0. the 2.0 for me, has been more controllable and less spin. 

 

both are very stable. 

 

hope this helps - if you have more questions let me know, cheers. 

  • Like 1

SiM2 / 9* / TZ6 65M5 tipped 1"

SiM2 Ti / 5w (set 1 tick lower loft) / TZ6 85M5 tipped 1"

SiM Max 3H / Tensei PW Hybrid 100TX

TI Apex TCB / 3-PW / Modus 130X

RTX Zipcore Black / 50,54,60 / KBS Tour X/S+

Piretti Tour 801R / 35.5"  & Spider EX Navy / 36"

Link to comment
Share on other sites

  • 3 weeks later...
On 7/15/2021 at 6:36 PM, Kovey10 said:

For anyone who has played both in their driver, how does this shaft in 65TX compare to a Hulk 70g 6.5TX? 

Gioguy guy is spot on.  2.0 might launch a little lower for me, but not much.  Improved dispersion in the 2.0, and reading this thread, is why I switched.  *Was using the 60g option in both shafts.  My numbers and results were very similar with the Hulk and the AV Raw White X.  All are great options.

 

I'll miss that shiny green shaft.

Titleist TSi3 9.25*  Tensei AV Raw White Proto 2.0- TX  
Titleist TSi3 5W 18* Tensei AV Raw White- x
Srixon ZX5 (4-6) ZX7 (7-pw) KBS tour 130-x
Mizuno T20 51* 54* 60* TT x-100
Callaway PM Grind 64*
SC Futura Phantom
Pro V1

 

 
Link to comment
Share on other sites

  • 1 month later...

Can someone help me make a decision?

I got fitted yesterday and I did best on the Graphite Design AD XC 7X (75g). This shaft is a 200$ upcharge on titleist and a 450$ upcharge with my fitter.

 

My fitter recommended the Raw AV White 75g X as an alternative, but since the TX is "better" (boron tip), I want to get it for the value

About me:

  • relatively new player, but hit a lot of balls as a kid over many years before "quitting" for 15 years
  • Have broken 90 five times counting penalties and such since I've come back 2 months ago.
  • Yesterday was my first fitting of any kind.
  • Fitter didn't try a tour stiff, maybe it is already better for me
  • My swing speed is 113
  • I started the fitting at a 103 but went up as soon I got heavier shafts. They felt like they could take it, I didn't try to do this it just felt natural
  • I had a 20 year old Titleist 983k with a stiff shaft before this. I think this subconsciously taught me to swing slow.
  • I have never worked on making my driver faster yet
  • For this reason I think with practice I will pick up some more SS.

 

So although my fitter had me on x stiff, I want to jump up to the tour for overall value and because I think my SS is likely to get a bit faster and I'm already in a SS where TX is often recommended on generic website/forum posts.

 


 

Edited by river11
information while trying to not ramble. Just editing for clarity
Link to comment
Share on other sites

On 9/12/2021 at 6:57 PM, river11 said:

Can someone help me make a decision?

I got fitted yesterday and I did best on the Graphite Design AD XC 7X (75g). This shaft is a 200$ upcharge on titleist and a 450$ upcharge with my fitter.

 

My fitter recommended the Raw AV White 75g X as an alternative, but since the TX is "better" (boron tip), I want to get it for the value

About me:

  • relatively new player, but hit a lot of balls as a kid over many years before "quitting" for 15 years
  • Have broken 90 five times counting penalties and such since I've come back 2 months ago.
  • Yesterday was my first fitting of any kind.
  • Fitter didn't try a tour stiff, maybe it is already better for me
  • My swing speed is 113
  • I started the fitting at a 103 but went up as soon I got heavier shafts. They felt like they could take it, I didn't try to do this it just felt natural
  • I had a 20 year old Titleist 983k with a stiff shaft before this. I think this subconsciously taught me to swing slow.
  • I have never worked on making my driver faster yet
  • For this reason I think with practice I will pick up some more SS.

 

So although my fitter had me on x stiff, I want to jump up to the tour for overall value and because I think my SS is likely to get a bit faster and I'm already in a SS where TX is often recommended on generic website/forum posts.

 


 

The TX is pretty manageable, and it sounds like you want to go down hat road anyway. 

 

Did you consider going with the 65g TX?  The lighter shaft should move a little faster for you.  What does your typical miss look like?

Edited by getair23

Titleist TSi3 9.25*  Tensei AV Raw White Proto 2.0- TX  
Titleist TSi3 5W 18* Tensei AV Raw White- x
Srixon ZX5 (4-6) ZX7 (7-pw) KBS tour 130-x
Mizuno T20 51* 54* 60* TT x-100
Callaway PM Grind 64*
SC Futura Phantom
Pro V1

 

 
Link to comment
Share on other sites

12 hours ago, getair23 said:

The TX is pretty manageable, and it sounds like you want to go down hat road anyway. 

 

Did you consider going with the 65g TX?  The lighter shaft should move a little faster for you.  What does your typical miss look like?

Haha, I ended up going with the 65 TX. It was indeed the road I wanted to go down and I yolo'ed it the night I made that post.

My miss, before I went to the fitter, was a slice. Some days worse than others but over the long run Id say 50% good, 40% manageable fade/slice, but the main problem  I was hoping to address was the 10% bad contact, instant OB, 50 yard hook that would come in spurts.

 

I think those hooks were from swinging a stiff shaft too hard.

Edited by river11
clarity/attempt at brevity
Link to comment
Share on other sites

7 hours ago, river11 said:

Haha, I ended up going with the 65 TX. It was indeed the road I wanted to go down and I yolo'ed it the night I made that post.

My miss, before I went to the fitter, was a slice. Some days worse than others but over the long run Id say 50% good, 40% manageable fade/slice, but the main problem  I was hoping to address was the 10% bad contact, instant OB, 50 yard hook that would come in spurts.

 

I think those hooks were from swinging a stiff shaft too hard.

Welcome to WRX and the world of x and tx shafts.  Enjoy your new purchase!

  • Like 1

Titleist TSi3 9.25*  Tensei AV Raw White Proto 2.0- TX  
Titleist TSi3 5W 18* Tensei AV Raw White- x
Srixon ZX5 (4-6) ZX7 (7-pw) KBS tour 130-x
Mizuno T20 51* 54* 60* TT x-100
Callaway PM Grind 64*
SC Futura Phantom
Pro V1

 

 
Link to comment
Share on other sites

20 hours ago, ry1808 said:

I currently play the Hulk shaft in my driver and find it a little 'dull' or 'boardy', i.e. no feel from it. From some of the comments here this shaft may well be exactly what I'm looking for. 

 

Does anyone know the difference between this shaft and the 1k? Just out of interest...

I've tested the all 3 shafts you mention.  The Hulk will feel the most stout/boardy.  The 2.0 is next in terms of stiffness but has some feel to it.  I had the 1k as my gamer and it's the softest profile based on the way it felt for me.  Has great feel to it, but I lost it hard left on bad swings more often than not.  Has the most kick to it as well IMO. 

TM SIM 2, 8* w/AD UB-7TX

TM SIM 15* w/Diamana ZF 80TX

TM Tour Issue Rescue 11 TP Deep Face Ghost Proto 16* HB  w/Thump 105x

New Level NLU-01 21* w/KBS Proto 105x

New Level 623-M 5-PW w/MMT 125 TX

54* Miura HB w/KBS 610 S+, 58* Miura w/KBS Tour Black

Scotty Cameron Studio Select Newport 1

 

 

 

Link to comment
Share on other sites

2 hours ago, phizzy30 said:

I've tested the all 3 shafts you mention.  The Hulk will feel the most stout/boardy.  The 2.0 is next in terms of stiffness but has some feel to it.  I had the 1k as my gamer and it's the softest profile based on the way it felt for me.  Has great feel to it, but I lost it hard left on bad swings more often than not.  Has the most kick to it as well IMO. 


Thanks. 
 

I went from the Ventus Black to the HULK. The Ventus feels very soft now compared to the HULK and the misses tended to be wilder than the HULK, especially as I have a faster transition. 
 

Any chance you’ve tested a Ventus Black to compare? Haha. 

Link to comment
Share on other sites

44 minutes ago, ry1808 said:


Thanks. 
 

I went from the Ventus Black to the HULK. The Ventus feels very soft now compared to the HULK and the misses tended to be wilder than the HULK, especially as I have a faster transition. 
 

Any chance you’ve tested a Ventus Black to compare? Haha. 

Check out the rpg too

Tsi4

917f2

503h

Mp-67

Vokey

Zipcore

Studio stainless

Link to comment
Share on other sites

57 minutes ago, ry1808 said:


Thanks. 
 

I went from the Ventus Black to the HULK. The Ventus feels very soft now compared to the HULK and the misses tended to be wilder than the HULK, especially as I have a faster transition. 
 

Any chance you’ve tested a Ventus Black to compare? Haha. 

i have...black is what i'd considered 'loose' compared to the AVW2.0P...there feels like a more pronounced kick to it and for me, thats not a good thing. 

 

 

SiM2 / 9* / TZ6 65M5 tipped 1"

SiM2 Ti / 5w (set 1 tick lower loft) / TZ6 85M5 tipped 1"

SiM Max 3H / Tensei PW Hybrid 100TX

TI Apex TCB / 3-PW / Modus 130X

RTX Zipcore Black / 50,54,60 / KBS Tour X/S+

Piretti Tour 801R / 35.5"  & Spider EX Navy / 36"

Link to comment
Share on other sites

2 hours ago, ry1808 said:


Thanks. 
 

I went from the Ventus Black to the HULK. The Ventus feels very soft now compared to the HULK and the misses tended to be wilder than the HULK, especially as I have a faster transition. 
 

Any chance you’ve tested a Ventus Black to compare? Haha. 

I had the Ventus Black as my gamer for most of last year and half of this year.  It's softer than the Hulk for sure.  I just put the Diamana PD as my gamer.  It's one of the stiffest shafts I've ever tested.  I'd say it's right there with the Hulk especially in 70TX but it has a bit of feel to it unlike the Hulk.  It's also one of the most stable and accurate shafts for me as well.  Does not want to curve much to the left and I can hit that 10 yard cut on command a lot easier than I could with the Ventus Black.  Being only 5'7, I have to give it my all in terms of effort and speed in order to get it out there so I have a very aggressive transition.  Give it whirl if you get the chance. 

Edited by phizzy30

TM SIM 2, 8* w/AD UB-7TX

TM SIM 15* w/Diamana ZF 80TX

TM Tour Issue Rescue 11 TP Deep Face Ghost Proto 16* HB  w/Thump 105x

New Level NLU-01 21* w/KBS Proto 105x

New Level 623-M 5-PW w/MMT 125 TX

54* Miura HB w/KBS 610 S+, 58* Miura w/KBS Tour Black

Scotty Cameron Studio Select Newport 1

 

 

 

Link to comment
Share on other sites

1 hour ago, gioguy21 said:

i have...black is what i'd considered 'loose' compared to the AVW2.0P...there feels like a more pronounced kick to it and for me, thats not a good thing. 

 

 

Try the Diamana PD.  It's stiff as a board in terms of profile, barely has any kick to it but still has some feel if that makes any sense, haha.  It also launches lower than the Ventus Black. 

  • Like 2

TM SIM 2, 8* w/AD UB-7TX

TM SIM 15* w/Diamana ZF 80TX

TM Tour Issue Rescue 11 TP Deep Face Ghost Proto 16* HB  w/Thump 105x

New Level NLU-01 21* w/KBS Proto 105x

New Level 623-M 5-PW w/MMT 125 TX

54* Miura HB w/KBS 610 S+, 58* Miura w/KBS Tour Black

Scotty Cameron Studio Select Newport 1

 

 

 

Link to comment
Share on other sites

2 hours ago, phizzy30 said:

Try the Diamana PD.  It's stiff as a board in terms of profile, barely has any kick to it but still has some feel if that makes any sense, haha.  It also launches lower than the Ventus Black. 

definitely on my "must hit" list...

 

  • Like 1

SiM2 / 9* / TZ6 65M5 tipped 1"

SiM2 Ti / 5w (set 1 tick lower loft) / TZ6 85M5 tipped 1"

SiM Max 3H / Tensei PW Hybrid 100TX

TI Apex TCB / 3-PW / Modus 130X

RTX Zipcore Black / 50,54,60 / KBS Tour X/S+

Piretti Tour 801R / 35.5"  & Spider EX Navy / 36"

Link to comment
Share on other sites

26 minutes ago, Gtyler14 said:

Have you hit the rpg? I love love love my 2.0 75tx but I’m testing the rpg just because it was sent to me to try. The 2.0 has been a anti left game changer for me.

I hit the older one that woodland had- I forget how long ago it was. 

 

 

SiM2 / 9* / TZ6 65M5 tipped 1"

SiM2 Ti / 5w (set 1 tick lower loft) / TZ6 85M5 tipped 1"

SiM Max 3H / Tensei PW Hybrid 100TX

TI Apex TCB / 3-PW / Modus 130X

RTX Zipcore Black / 50,54,60 / KBS Tour X/S+

Piretti Tour 801R / 35.5"  & Spider EX Navy / 36"

Link to comment
Share on other sites

Just got mine (SIX days since i ordered from titleist, I couldn't believe my eyes when the box came).

You guys are all so detailed here lol, able to compare to so many shafts and identify which parts are stiff/flexible. I'm adding my laymans opinion in case it helps anyone

As a low 90s player whose really only tried drivers and shafts during his first driver fitting, I can only say it feels nice. Honestly I wouldn't know for sure what a "telephone pole" or "boardy" shaft feels like but this feels fine.

My SS is 113 and my fitter recommended me the Graphite Design AD XC 7x. I went with the White raw TX 2.0 because it was free lol. Any other noobs reading this, it doesn't feel that bad to run a TX. Launch & distance is fine going by eye test.

I'm going to go see how it does on a launch monitor because as I understand it, having too stiff of a shaft means your shots go straight (if you hit straight), you just lose distance. So Ill see if the distance matches when I'm on the course/launch monitor

Edited by river11
Link to comment
Share on other sites

On 3/26/2021 at 11:20 PM, speeder757 said:

What is MCA’s fascination with giant butt diameters lately.... The OG Whiteboard was .600 Every since then they just keep getting bigger 


I think that is one of the big "selling points" of the fifth generation Diamana shafts, consistent handle diameter. I think it is a cost saving measure as well, because there are three main ways to stiffen any part of a shaft; use stronger materials (more expensive), thicken the walls with more material (adds weight, also more expensive), or increase the diameter of the section (most economical). 

 

Taylormade SIM 10.5* Diamana X'17 70TX || Taylormade SIM 9* Diamana X'17 70X
Taylormade SIM Ti V2 15* Diamana DF 80TX || Taylormade SIM Ti 15* Kuro Kage DCXM 80TX
Taylormade M5 19* Tensei Pro White 90TX || TItleist 915FD 18* Fujikura Motore VC 9.2 Tour Spec X 
Srixon ZX Utility 20* HZRDUS Red 105 6.5 || Taylormade RSI UDI 20* Kuro Kage 100XTS Hybrid  
Bridgestone J40 DPC 4i-7i 23*- 35* Brunswick Precision Rifle FCM 7.0
Bridgestone J40 CB 8i-PW 39*- 48* Brunswick Precision Rifle FCM 7.0

Taylormade Milled Grind Raw 54* Brunswick Precision Rifle FCM 7.0
Vokey SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision Rifle FCM 7.0
Scotty Cameron Newport Tour Red Dot || Taylormade Spider X Navy Slant

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Our picks

    • 2021 RSM Classic - Discussion and Links
      2021 RSM Classic - Monday
      2021 RSM Classic - Tuesday #1
      2021 RSM Classic - Tuesday #2
       
       
      Trey Mullinax - WITB - 2021 RSM Classic
      Brett Drewitt - WITB - 2021 RSM Classic
      Matt Wallace - WITB - 2021 RSM Classic
      Josh Creel - WITB - 2021 RSM Classic
      Ben Crane - WITB - 2021 RSM Classic
      Justin Lower - WITB - 2021 RSM Classic
      Adam Svensson - WITB - 2021 RSM Classic
      Brendon Todd - WITB - 2021 RSM Classic
      Webb Simpson - WITB - 2021 RSM Classic
      Chesson Hadley - WITB - 2021 RSM Classic
      Kiradech Aphibarnrat - WITB - 2021 RSM Classic
      Bill Haas - WITB - 2021 RSM Classic
      Max Homa - WITB - 2021 RSM Classic
      Nick Watney - WITB - 2021 RSM Classic
       
       
      New Odyssey Tri Hot putters - 2021 RSM Classic
       
       
       
       
      • 1 reply
    • 2021 Hewlett Packard Enterprise Houston Open - Discussion & Links
      Please put any questions or comments here
       
      Pat Perez - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Tony Finau - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Kramer Hickok - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Paul Barjon - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Nate Lashley - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Seamus Powers - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Dylan Frittelli - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      C.T. Pan - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Chase Koepka - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Branden Grace - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Marc Leishman - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Martin Laird - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Shane Lowery - WITB - @ 2021 Hewlett Packard Enterprise Houston Open
       
      Cameron CT T-11 putter - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      New Graphite Design shafts - WITB @ 2021 Hewlett Packard Enterprise Houston Open
      Cameron cover from 2021 ZOZO Championship - @ 2021 Hewlett Packard Enterprise Houston Open
      Bettinardi covers - @ 2021 Hewlett Packard Enterprise Houston Open
      Cameron CT putters - @ 2021 Hewlett Packard Enterprise Houston Open
       
       
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #1
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #2
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #3
      2021 Hewlett Packard Enterprise Houston Open - Tuesday #4
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #1
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #2
      2021 Hewlett Packard Enterprise Houston Open - Wednesday #3
       
       
       
       
      • 1 reply
    • APPLY NOW: L.A.B. Golf MEZZ.1 Putter (Early Access) Member Testing! 10 Testers Needed!
      L.A.B. Golf is choosing ten GolfWRX members to receive their MEZZ.1 putter early and put their brand new product to the test before reporting back to the community about what they see. The selected testers will be one of the first to experience the MEZZ.1 from L.A.B. GOLF, their newest Lie Angle Balanced design, ahead of it's January 2022 launch!
       
      About The L.A.B. Golf Mezz.1 Putter
      MEZZ.1 is our new mid-mallet putter that’s fully CNC machined from a billet of 6061 aircraft aluminum (body) and 303 stainless steel (midsection) to create our best-feeling — and we think best looking — putter to date. It includes 10 weights (eight on the bottom, two on the sides) that allow us to individually build each putter to a golfer’s exact specifications.
       
      How To Apply
      In a post below, answer the following questions.
       
      1. City, State?
      2. Handicap?
      3. What is your current putter?
      4. Have you ever used a L.A.B. Golf putter?
      5. Why do you want to review the MEAZZ.1 putter?
      6. Do you agree to participate in an ongoing testing thread, posting reviews and photos?
       
      That's it! @labgolf and GolfWRX will choose the testers in about 2 weeks! This testing event is for good-standing members in the USA only!
       
        • Thanks
        • Like
      • 435 replies
    • 2021 CJ Cup at The Summit Club - Discussion and Links
      Please put any questions or comments here
       
       
      2021 CJ Cup at The Summit Club - Tuesday #1
      2021 CJ Cup at The Summit Club - Tuesday #2
       
       
      Adam Scott - WITB - 2021 CJ Cup at The Summit Club
      Justin Rose - WITB - 2021 CJ Cup at The Summit Club
      Collin Morikawa - WITB - 2021 CJ Cup at The Summit Club
      Jason Day - WITB - 2021 CJ Cup at The Summit Club
      Justin Thomas - WITB - 2021 CJ Cup @ The Summit Club
      Erik Van Rooyen - WITB - 2021 CJ Cup @ The Summit Club
      Matt Jones - WITB - 2021 CJ Cup at The Summit Club
      Cam Davis - WITB - 2021 CJ Cup at The Summit Club
      Cam Smith - WITB - 2021 CJ Cup at The Summit Club
      Byeong Hun An - WITB - 2021 CJ Cup at The Summit Club
      Min Kyu - WITB - 2021 CJ Cup at The Summit Club
      Joohyung Kim - WITB - 2021 CJ Cup @ The Summit Club
      Tommy Fleetwood - WITB - 2021 CJ Cup @ The Summit Club
      Jordan Spieth - WITB - 2021 CJ Cup @ The Summit Club
      Lucas Glover - WITB - 2021 CJ Cup @ The Summit Club
      Keegan Bradley - WITB - 2021 CJ Cup @ The Summit Club
       
       
       
      Gary Woodland's new Cameron putter - 2021 CJ Cup @ The Summit Club
      Kevin Na's new Odyssey/Toulon putter - 2021 CJ Cup @ The Summit Club
      Jucie wedges & Proto irons - 2021 CJ Cup at The Summit Club
       
       
       
       
      • 6 replies
    • 2021 Shriners Hospitals for Children Open WITB Photos- Discussion & Links
      Please put any questions or comments here...
       
      Links:
       
      Harry Higgs - WITB - 2021 Shriners Hospitals for Children Open
      Ian Poulter - WITB - 2021 Shriners Hospitals for Children Open
      Corey Conners - WITB - 2021 Shriners Hospitals for Children Open
      Harry Higgs - WITB - 2021 Shriners Hospitals for Children Open
      Matt NeSmith - WITB - 2021 Shriners Hospitals for Children Open
      Doug Ghim - WITB - 2021 Shriners Hospitals for Children Open
      New Cameron Las Vegas covers - 2021 Shriners Hospitals for Children Open
      New Project X HZRDUS Smoke RDX shafts - 2021 Shriners Hospitals doe Children Open
       
       

       
        • Like
      • 15 replies

×
×
  • Create New...