Jump to content

G425 delivery times


moadhia

Recommended Posts

11 minutes ago, forthawk said:

FYI I ordered ping G425 irons 5-pw  AWT yesterday from a major national online seller.  They shipped today and should arrive Monday.

 

The catch is my fitting measures absolutely average.  Black, aWT shaft, stiff.

Yep, that's stock so no customization needed.  Good for you that you fit into a stock option.  Enjoy the irons.  

Link to comment
Share on other sites

On 5/15/2021 at 11:37 AM, TreeHugger73 said:

I was fit into a stock G425 LST 9° with Tensei AV Orange X flex (stock) on April 1. I asked for an update yesterday and was told, "looks like it will be here next week." 

 

I'm not holding my breath that it will actually be here next week. 

 

I got a call that the driver is ready to be picked up. 7ish weeks is better than I thought it would be! 

Link to comment
Share on other sites

On 5/21/2021 at 9:04 PM, Cactus Jack said:

I went to the PGA Tour Super Store today to order a few fairway woods. I was told they just received an “emergency bulletin” from Ping stating all orders will take a minimum 10 weeks to deliver. The store rep said compared to all companies Ping is by far in the worst shape. 

Because the Ping G425’s are selling like hot cakes.

Link to comment
Share on other sites

35 minutes ago, TreeHugger73 said:

 

I got a call that the driver is ready to be picked up. 7ish weeks is better than I thought it would be! 

Ping's own product availability states that most irons are 50-60 days lead time.  Worse if you ask for a shaft they don't have.

Ping G400 9º TFC 419 Stiff at 45"

Jazz 3 wd Powercoil Stiff
Ping i20 3 Hyb 707H Stiff
Rogue 3iron Recoil 660 F3 +1/2"
X2 Hot 4-PW Recoil 660 F3 +1/2"
Vokey SM2 52º cc, Ping ES 56º and ES 60º
Ping Sigma2 Valor at 34.75"
MCC Align Midsize

Link to comment
Share on other sites

On 5/23/2021 at 6:00 PM, NZ315 said:

That's good for you. Not for me I ordered mine LST 10.5 tensi orange x-flex before you and I still don't have it. And I was told not till July. 

Luck of the draw I guess

I think that’s the shaft. 
I tried to order one with a Tensei orange and discount dans wouldn’t take my order. Said ping was having issues getting that shaft 

Ping G425 Max 10.5*

Ping G425 SFT 5w

Exotics Trilogy 5h

Ping i200 5-GW

Cleveland CBX Full Face 56/60

Cobra Vintage Stingray 40

Handicap: 9.2

Link to comment
Share on other sites

13 hours ago, Bo Hogan said:

 Ordered 3/9 ...5-U told by Ping last week Mid to Late June.

The Recoil Smacwrap Shafts are the issue.

Mine were the same shafts in stiff, 5-SW. Took 5 weeks to the day. Ordered 3/22 arrived 4/29. Not sure why yours are taking so long. 

Ping G410 Tour AD DI6S

Ping G425 Tensi Orange

Ping G30 5W

Ping G425 Hybrid Tensi Orange

Ping G425 5-SW, UST Recoil ES F4S

Ping Glide LW

Bettinardi Studio 28cs

Link to comment
Share on other sites

Has anyone ordered and received anything with the Tensei Orange 55 regular?  I'm asking for my great-grandmother, of course, I only play tour X-stiff...

  • Like 3

Ping g425 Max 12/Tensei orange 55
Ping g410 4h & 5h hybrids/Tensei blue

Ping Eye 2+ BeCu 3-SW, Eye 2 BeCu SW

TP Mills Sycamore/Spalding TPM VIII/Mizuno-TP Mills Workshop III

Link to comment
Share on other sites

2 hours ago, sm_watts said:

Has anyone ordered and received anything with the Tensei Orange 55 regular?  I'm asking for my great-grandmother, of course, I only play tour X-stiff...

I think the tensei orange is giving Ping problems across all weights and flex.

Ping G425 LST  10.5* -  Ping Tour 65x
TaylorMade R15 3W - Speeder Evolution S
Ping G425 2 Hybrid 17* - Ping Tour 85x
Mizuno 921F 4-GW - KBS C-Taper Lite X
Cleveland RTX 60
TaylorMade Spider - Counterweight 

Link to comment
Share on other sites

Question for you all. Are you guys customizing the g425 driver and is that why it's taking so long? At my PGA superstore there are tons just sitting on the shelf...plenty of shaft and flex options. I bought my G425 from them early March and absolutely love this thing. Tried about 3 of the shaft options on the 425 max driver, and ended up hitting the Alta CB best so that's what I went with.


Hope you all get yours soon...cause this club is awesome

Link to comment
Share on other sites

My G410 LST 3 wood face cracked. I had planned to get the MAX this year. I took the cracked 3 wood to Edwin Watts where I bought it to have it sent in and they (Ping) sent back a G425 LST 3 wood with all the same specs I had previously (-1/2”, EF Black XS) within a week. It looks like I’ll be sticking with the LST. Regardless, another reason why I’m such a Ping homer. 

Ping G30 9* Tour 80X
Ping G Stretch Tour 80X
Ping i500 3 DG 120 X100
Ping i210 4-U DG 120 X100
Glide 2.0 Stealth 54* SS DG S400
Glide 2.0 Stealth 58* ES DG S400
Ping Anser TR 1966 / Odyssey White Hot #2

Link to comment
Share on other sites

2 hours ago, mmacdon3 said:

Question for you all. Are you guys customizing the g425 driver and is that why it's taking so long? At my PGA superstore there are tons just sitting on the shelf...plenty of shaft and flex options. I bought my G425 from them early March and absolutely love this thing. Tried about 3 of the shaft options on the 425 max driver, and ended up hitting the Alta CB best so that's what I went with.


Hope you all get yours soon...cause this club is awesome

Well at MY pga superstore.... ah nuts, I live in the middle of Wyoming. Can you post of pic of the full rack of drivers for those of us that have forgotten what they look like since we placed our order? 😂🤣

Ping g425 Max 12/Tensei orange 55
Ping g410 4h & 5h hybrids/Tensei blue

Ping Eye 2+ BeCu 3-SW, Eye 2 BeCu SW

TP Mills Sycamore/Spalding TPM VIII/Mizuno-TP Mills Workshop III

Link to comment
Share on other sites

Fitting Form 2021-05-02 Wyckoff, Matt.pdf

 

Here is a new data point from Portland, Oregon. Ordered 5/2 from major golf center. I can’t wait to get them.

Curious what everyone thinks. It is my first fitting and real set so any input would be cool! Upgrading from my old Ping i10’s.

ALL LEFT HANDED

Ping G425 4-PW, UW - Project X 6.5x shaft green +2 lie and midsize ping stock grip for all.
G425 Max Driver, 5 wood and SW - Tour 173 75x shaft
G425 Hybrid 4 - Tour 173 85x
Ping Glide 3.0 (54 and 58 degrees) – D6 shaft? I think it is stock.

Quoted 8-12 weeks but it sounded like they are expecting it closer to the 8 weeks.

Link to comment
Share on other sites

12 hours ago, sm_watts said:

Well at MY pga superstore.... ah nuts, I live in the middle of Wyoming. Can you post of pic of the full rack of drivers for those of us that have forgotten what they look like since we placed our order? 😂🤣

Haha well that helps explain it! I'm from Chicago so I actually have access to two PGA superstores...although both are about 40 min drive away so I only go there when I have a purchase in mind. Would say they have about 40 G425 drivers sitting out at any given time. Different shaft options but I didn't check to see if they were all there. If there's a shortage on Tensei orange then wouldn't be surprised if they didn't have that one.

 

Love just going there and testing out the different G425 fairway woods and hybrids. Would love to get a 3w or 5w next, but I seem to only be able to hit it off a tee well. Off the deck I'm trash 🤣

Edited by mmacdon3
Link to comment
Share on other sites

I was suppose to get my G425 irons the 26th from Dicks, and was told yesterday that it will now be the 1st of July after I raised hell as to where are they.  What sorry service. I have now asked them to cancel my order.  

Ping G Max 10.5

TM Sim Max 5 & 7 wd  

Ping G410 4, 5, & 6 hy

AP1 714 7-aw2 

MD5 54* 10ss

Toulon Columbus 

 

Link to comment
Share on other sites

7 minutes ago, platgof said:

I was suppose to get my G425 irons the 26th from Dicks, and was told yesterday that it will now be the 1st of July after I raised hell as to where are they.  What sorry service. I have now asked them to cancel my order.  

You're complaining at Dicks, in a thread about Ping back log.....Dicks doesn't have a clue- just what Ping tells them 

 

Nice

Edited by animalgolfs

Ping Sunday Bag
9 Clubs of Freedom

Link to comment
Share on other sites

24 minutes ago, platgof said:

You must be the head manager there.

 

All due respect, as you are posting in this thread, you must know that things are a mess right now.  What do you really expect Dick’s to know or be doing?  I placed an order for G425 irons with my club pro a week or two ago.  A month or two from now, when I likely still don’t have my irons, it ain’t gonna be my pro’s fault.  I will start losing my patience at some point, but my ire will be directed at Ping if anyone.

 

Ping is the worst of the worst right now with delays.  If I desperately needed my clubs ASAP, I wouldn’t have ordered a custom set from Ping.  But being I play custom graphite, I can’t just buy a set off the shelf with AWT steel shafts.  Just my .02 cents…

Ping G425 Max 9* Driver, UST Mamiya Proforce V2 6F3

Cobra King SpeedZone 14.5* 3 Wood, Project X HZRDUS Smoke Blue RDX 70 6.0

Callaway Epic Flash 7 Wood, Accra FX 2.0 200F M3

Srixon Z H85 4 Hybrid, Project X HZRDUS Black 85 6.0

Ping G425 Irons 5-UW, Aerotech Steelfiber i110 R

Cleveland RTX Zipcore SW (54*/10) and LW (58*/10), Aerotech Steelfiber i110 S

Scotty Cameron 009-M Putter

Link to comment
Share on other sites

54 minutes ago, jeffrey r said:

 

All due respect, as you are posting in this thread, you must know that things are a mess right now.  What do you really expect Dick’s to know or be doing?  I placed an order for G425 irons with my club pro a week or two ago.  A month or two from now, when I likely still don’t have my irons, it ain’t gonna be my pro’s fault.  I will start losing my patience at some point, but my ire will be directed at Ping if anyone.

 

Ping is the worst of the worst right now with delays.  If I desperately needed my clubs ASAP, I wouldn’t have ordered a custom set from Ping.  But being I play custom graphite, I can’t just buy a set off the shelf with AWT steel shafts.  Just my .02 cents…

Nothing I'd like more than a worthy Dicks directed complaint-  this just isn't the case

  • Haha 1

Ping Sunday Bag
9 Clubs of Freedom

Link to comment
Share on other sites

I ordered a custom G425 hybrid on 4/15 with an estimated ship date of 5/15. I just got an updated ship date of 7/1.

 

 Here is the message:

 

We are sorry for the delay on your custom clubs. Our system is currently showing an estimated ship date of 07/01/21. There are currently longer than expected lead times for custom orders.

Link to comment
Share on other sites

10 hours ago, Rb-boston said:

I ordered a custom G425 hybrid on 4/15 with an estimated ship date of 5/15. I just got an updated ship date of 7/1.

 

 Here is the message:

 

We are sorry for the delay on your custom clubs. Our system is currently showing an estimated ship date of 07/01/21. There are currently longer than expected lead times for custom orders.

Can you give specs on you hybrid custom order?

Link to comment
Share on other sites

Is there a way to get a detailed g425 delivery date?  I've got a Ping login. In the Q&A section it states they won't break the trust with with their dealers, but they will be happy to contact the dealer on my behalf--will this work?  G425 irons ordered 4/18 Ping standard steel, +1/2", standard grip, white dot. It seems the delays are on none standard grips, shafts and graphite shafts.  I was quoted 6 weeks, but I'm 

becoming concerned about a significant miss.

Link to comment
Share on other sites

The reason I am upset is, the week I am suppose to have them, no one contacts me and says, hey we are having problems. Four days after my clubs were suppose to be here I get a delayed order notice after contacting them first. They told me Monday that they were ready to ship. Now it is a July 1st arrival date. I mean when you think you are going to break your new irons in over the Memorial weekend, and nothing. 

Ping G Max 10.5

TM Sim Max 5 & 7 wd  

Ping G410 4, 5, & 6 hy

AP1 714 7-aw2 

MD5 54* 10ss

Toulon Columbus 

 

Link to comment
Share on other sites

On 5/28/2021 at 1:20 PM, Wellwerewaiting said:

Is there a way to get a detailed g425 delivery date?  I've got a Ping login. In the Q&A section it states they won't break the trust with with their dealers, but they will be happy to contact the dealer on my behalf--will this work?  G425 irons ordered 4/18 Ping standard steel, +1/2", standard grip, white dot. It seems the delays are on none standard grips, shafts and graphite shafts.  I was quoted 6 weeks, but I'm 

becoming concerned about a significant miss.

It's worth getting the PING 7 digit order number from your retailer and call PING yourself at the customer service number on their website. They'll give you an estimated date (that could/will change) and whether any item on your order (e.g., non-standard grip) is holding up shipment. If you do want to change or cancel your order, you'll need to do that with the retailer. 

Edited by Drawman
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...