Tour Project X Even Flow RipTide MX & LX proto shafts - Farmers 2021

[GolfWRX_Spotted]

Edited May 19, 2021 by pga43

[bcflyguy1]

Refresh of EvenFlow Blue and Black profiles, I suspect. 

MX has a very strong Aldila Voodoo vibe about it.

Edited January 27, 2021 by bcflyguy1

[sociojeje]

5 hours ago, bcflyguy1 said:

Refresh of EvenFlow Blue and Black profiles, I suspect. 

MX has a very strong Aldila Voodoo vibe about it.

 

I would love to try an upgraded evenflow black! I guess LX would the one? 

[geauxWRX]

@TrueTemper, please send me a MX proto in 80tx to test in a fairway. Having great success with RDX black 70tx in the driver. The lower torque value has benefitted me. 

[bcflyguy1]

Wade and Trottie were talking about these both being quite low on torque values. My guess is the story on these is that they managed to get the torque down (2.5 in LX, 2.2 in the MX IIRC) without the shafts having a boardy and/or brittle feel at impact. If that is in fact what's going on here, they'll have my attention.

Edited January 27, 2021 by bcflyguy1

[markheardjr]

I saw this on Facebook with the Wade video. Lower torque, tighter dispersion. I'm interested. Been gaming Evenflow Black and loving them. I ordered the Riptide 70 6.5 in my SIM fairway but it was just a little too loose. If this is a tighter Evenflow then it may have a shot, and appreciate PX listening to the feedback.  I'll be looking for a 70 6.5 LX to try in my SIM Fwy and my driver. Also may get a SIM2 5 wood if these make it to TMAG custom order list.

Edited January 27, 2021 by markheardjr

[rkillian]

I like the even flow black I have in my hybrid. It's stable without feeling overly stiff for me. I had the blue for a short time in a fairway. It felt good but I had control issues. The Rogue White I have not is much better for me. I've had a smoke black and now a smoke yellow in my drivers. I would really be interested to try either one of these and see the results. I like the even flow profile.

[gprubes]

They both look amazing, like all of the Riptide lines!!!

[Chilli9880]

14 hours ago, bcflyguy1 said:

Refresh of EvenFlow Blue and Black profiles, I suspect. 

MX has a very strong Aldila Voodoo vibe about it.

I thought so too!

[Poolparty]

Waiting for an upgraded EF White

[ga_pike]

I'm gaming Riptide CB in my driver and Riptide in my 3 and 7 woods.  If I can get the same shaft with lower torque, sign me up!!

[jus]

I think these will be a big hit.  I have hit the MX and loved it.  Low torque but not boardy like you might think.

[Morry]

Any other feedback?

 

Mx is very intriguing 

 

 

[ShortSticks]

Very interested in these shafts. Any updates

[golffeen007]

On 5/18/2021 at 3:39 PM, ShortSticks said:

Very interested in these shafts. Any updates

I've got the LX 70x proto and it's stout but feels smooth. It's on par with my 21" Accra RPG M5+ and def low spin low launch for me in the LST head. Gamer is a GD M9003 and I had to loft it up from 8 with with LX. These should be huge for anyone wanting a low/low shaft with feel.

[markheardjr]

21 hours ago, golffeen007 said:

Gamer is a GD M9003 and I had to loft it up from 8 with with LX.

WOWOWOWOWOW!!! Yup, Im interested!!

[autronicdsm]

When are these supposed to be out? I thought their Insta account said they were available at performance fitting centers now, but when I emailed Golf Works they said 2022. 😕

[LanceEA]

I'm ready for a new EvenFlow shaft that is low/low or comparable. Are any of these in circulation on the tour or similar? Haven't heard a peep about them for months.

[ShortSticks]

Here are the Specs f or the MX and LX

[ShortSticks]

I was disappointed in the specs of the MX after all the hype that they were gonna be low torque. Only the TX flex is really low torque, the rest aren't much different from the other Evenflow shafts. They also have HUGE BUTTS, .635 in the MX 60 6.5 (WOW).

 

I waited for these to come out and now went another direction with a VENTUS red instead.

Edited July 16, 2021 by ShortSticks

[noaces06]

On 1/27/2021 at 10:20 AM, bcflyguy1 said:

Wade and Trottie were talking about these both being quite low on torque values. My guess is the story on these is that they managed to get the torque down (2.5 in LX, 2.2 in the MX IIRC) without the shafts having a boardy and/or brittle feel at impact. If that is in fact what's going on here, they'll have my attention.

I just picked up on the of the MX prototype shafts for my 3 wood and it is incredible.  I'm not usually a fan of mid launch/mid spin shafts but this is definitely unique.  I could feel it throughout my swing but the tip section kept it incredibly stable so I never worried about losing it - no matter how hard I went at it.

 

It's a perfect compliment to my SIM Ti head - I'm getting great flight and it's so much easier to launch, I don't have to go 100% at it to make it go.  If you get the option, this really is a terrific shaft.

 

Oh, and it looks incredible in the sun... which never hurts!

[Poolparty]

Trill Peoples has these for sale now

 

 

Waiting to see some profiles on these

[Mookie91]

Looking to swap out my stock HZRDUS Green and the LX sounds great.  Can’t wait to hear reviews.

[msteitz87]

On 7/16/2021 at 9:20 AM, noaces06 said:

I just picked up on the of the MX prototype shafts for my 3 wood and it is incredible.  I'm not usually a fan of mid launch/mid spin shafts but this is definitely unique.  I could feel it throughout my swing but the tip section kept it incredibly stable so I never worried about losing it - no matter how hard I went at it.

 

It's a perfect compliment to my SIM Ti head - I'm getting great flight and it's so much easier to launch, I don't have to go 100% at it to make it go.  If you get the option, this really is a terrific shaft.

 

Oh, and it looks incredible in the sun... which never hurts!

What spec is your MX?  Given the torque drop-off between the TX and 6.5, curious to know if anyone has gamed the TX yet. 

[noaces06]

Mine is the Proto, so I'm not really sure what the actual flex is.  Somewhere between X and TX I imagine. 

[Kaexo]

On 8/19/2021 at 2:13 PM, noaces06 said:

Mine is the Proto, so I'm not really sure what the actual flex is.  Somewhere between X and TX I imagine. 

Proto is TX flex per True Temper. It goes 6.5 to proto.

[ShortSticks]

Anyone have a release date for these yet?

[Kaexo]

13 hours ago, ShortSticks said:

Anyone have a release date for these yet?

Released a couple weeks ago bud.

[sociojeje]

Does anyone play this shaft? 

[wam78]

Bump…

 

Anyone playing the lx in a fairway?  I’m looking at the 70 6.5.  Curious to hear more feedback.  I usually gravitate towards blueboard profiles, but the stability with feel is very intriguing.