All-Fit Universal Adaptor Thread

[M44km44k]

Omg what an idiot I am. I swear I looked them up on Monday and didn't see a place to order... Stupid stupid stupid.... Thanks I can't wait to stop pulling adapters every other day!

[SwingBlues]

On 3/31/2021 at 8:29 AM, M44km44k said:

Love the thread guys! I'm trying to get the switch over to universal adapters and have left multiple voicemails and emails to Anthony at club conex. I've heard nothing back. 

Is everyone ordering directly from Top Golf via email? I did shoot them an email a few days ago but haven't heard back. In the meantime I did order what appears to be a knockoff of the all fit adapter system off ebay. I would prefer to order direct from Top Golf if possible, but really just want to get going on this as fast as possible.

Appreciate the help and all the research you guys have done.

 

Welcome to the "universals" 😁

 

Yeah, forget about Club Conex. Last bit of news there was from @knudson81 that they are "considering" the retail consumers like us (see his earlier post). Since then, I have tried to email Anthony as well with zero response. Like it's going into the email black hole. So don't hold your hopes up.

 

I also use an old R7 wrench - that is a perfect fit but it only does 30 in/lbs pressure. I think thats OK as well, no issues with the tighness.

 

Edited August 30, 2023 by SwingBlues

[Tufph]

For the wrench I use mizuno or the older taylormade tools. Mizuno fits really well.

[GetEagle]

Look likes they just posted the Torque Wrench

Are they watching this topic. 😁

 

https://www.allfitgolf.com/collections/all-fit/products/universal-golf-torque-wrench-longer-t25-tips-size

[ericft]

I placed an order last week and spoke to them about this wrench and ordered a few should be delivered any day now. 

[SwingBlues]

On 4/1/2021 at 4:15 PM, GetEagle said:

Look likes they just posted the Torque Wrench

Are they watching this topic. 😁

 

https://www.allfitgolf.com/collections/all-fit/products/universal-golf-torque-wrench-longer-t25-tips-size

 

 

Hope so. Best place to get actual feedback on their product - like the OEM wrenches not fitting etc.

 

 

Edited August 26, 2023 by SwingBlues

[PapaJohick]

ummm soooo just looking into these and its 25$ for shipping? that's intense for two little adapters and 2 collars.... am I missing something here?

[SwingBlues]

On 4/2/2021 at 9:26 AM, PapaJohick said:

ummm soooo just looking into these and its 25$ for shipping? that's intense for two little adapters and 2 collars.... am I missing something here?

 

Nope, you're not missing anything. Unfortunately Top Golf has no US distributor for their product so you are dealing with them directly from China. And they only do FedEx express 2/3 day shipping from China so it's pretty fast for what you pay considering it's coming across the Pacific.

 

 

Edited August 30, 2023 by SwingBlues

[PapaJohick]

48 minutes ago, SwingBlues said:

 

Nope, you're not missing anything. Unfortunately Top Golf has no US distributor for their product so you are dealing with them directly from China. And they only do FedEx express 2/3 day shipping from China so it's pretty fast for what you pay considering it's coming across the Pacific.

 

Now, they do offer free shipping if it's 50+ adapter pieces but that's way too much for any of us retail consumers. What I did was to bundle as many as I need for an order > $100 to make it worth my while even for sleeves for drivers I do not have yet like Taylormade or Mizuno.

 

yeah, they ain't no "free" shipping on $2 part from China mob like on Fleabay

Haha I mean I didn’t expect free shipping but 25$ for less than a lb damn haha. 
 

[PLLand55]

Very strange, but looks like the inner threading of adapter came out on a .335 tip. Will be calling them for an exchange. 

[kjbuckeye]

16 minutes ago, PLLand55 said:

Very strange, but looks like the inner threading of adapter came out on a .335 tip. Will be calling them for an exchange. 

Interesting. Let us know how it turns out. 

[GetEagle]

Definitely you forgot the ring , and screw was bottom up from the thread 

[PLLand55]

Guys. I’m trying to get my hands on the screw for the all fit adapter to work on ping clubs. 
 

Is anyone distributing this all-fit components domestically yet? 

[kjbuckeye]

On 4/17/2021 at 12:51 PM, PLLand55 said:

Guys. I’m trying to get my hands on the screw for the all fit adapter to work on ping clubs. 
 

Is anyone distributing this all-fit components domestically yet? 

Not to my knowledge, just through allfitgolf.com.

[SwingBlues]

@PLLand55 so what happened? What torque wrench did you use? any shots of that effected adapter tip? Little more info would be nice, thanks

 

 

 

 

Edited August 26, 2023 by SwingBlues

[PLLand55]

I really think what happened is that when I put the tip in my Mizuno 190 3 wood head the screw was too long and the post of the screw was getting tourqed into the threading. 
 

I will let them know. I assume the Mizuno fairway head went under the radar but not certain. I used the washer and it still broke. 

[PLLand55]

9 hours ago, SwingBlues said:

@PLLand55 so what happened? What torque wrench did you use? any shots of that effected adapter tip? Little more info would be nice, thanks

 

Per kj, there is no US distributor. Yet. If you don't hear back from allfit this evening, PM me I can spare a ping screw.

 

 

Appreciate you. Went to PGA Superstore to test my Callaway LS against TSi4. Got some really good results. Love my Auto Flex shaft. 

[kjbuckeye]

8 minutes ago, PLLand55 said:

I really think what happened is that when I put the tip in my Mizuno 190 3 wood head the screw was too long and the post of the screw was getting tourqed into the threading. 
 

I will let them know. I assume the Mizuno fairway head went under the radar but not certain. I used the washer and it still broke. 

It does look like the screw was threaded too deeply. Too my knowledge there is no specific screw for Mizuno. I just got my new Mizuno ST-Z Driver and fairway wood in. I will test the adapters and report back any findings. 

[GetEagle]

6 minutes ago, PLLand55 said:

I really think what happened is that when I put the tip in my Mizuno 190 3 wood head the screw was too long and the post of the screw was getting tourqed into the threading. 
 

I will let them know. I assume the Mizuno fairway head went under the radar but not certain. I used the washer and it still broke. 

obviously, it is pop-up from the bottom. you can see the thread parts has been push to the thread. sometime for the click, you can feel of the screw have touch the bottom. that is important. special some models out of radar. 

[kjbuckeye]

10 minutes ago, PLLand55 said:

I really think what happened is that when I put the tip in my Mizuno 190 3 wood head the screw was too long and the post of the screw was getting tourqed into the threading. 
 

I will let them know. I assume the Mizuno fairway head went under the radar but not certain. I used the washer and it still broke. 

What brand wrench were you using?

[kjbuckeye]

1 minute ago, GetEagle said:

obviously, it is pop-up from the bottom. you can see the thread parts has been push to the thread. sometime for the click, you can feel of the screw have touch the bottom. that is important. special some models out of radar. 

I think it’s important to find out what happened exactly. If there is an issue with adaptors and their comparability with Mizuno, Top Golf needs to know. Or if we can determine user error, then so be it. 

[GetEagle]

9 minutes ago, kjbuckeye said:

It does look like the screw was threaded too deeply. Too my knowledge there is no specific screw for Mizuno. I just got my new Mizuno ST-Z Driver and fairway wood in. I will test the adapters and report back any findings. 

my experience is to feel if it roughly tighten before click, it can be easily tell if screw touch bottom, but the club head is still very loose.

 

that is the best way. since there is soooo many club models.

 

[kjbuckeye]

15 minutes ago, GetEagle said:

my experience is to feel if it roughly tighten before click, it can be easily tell if screw touch bottom, but the club head is still very loose.

 

that is the best way. since there is soooo many club models.

 

That’s a problem then. Should be a different screw. 

[PLLand55]

21 hours ago, kjbuckeye said:

It does look like the screw was threaded too deeply. Too my knowledge there is no specific screw for Mizuno. I just got my new Mizuno ST-Z Driver and fairway wood in. I will test the adapters and report back any findings. 

Hey guys. Got some feedback from All-Fit. 
 

When I received my order the only component I was missing was the #1 Ping screw, which I believe is longer than standard screw. I will be reaching out to them so that they are aware of my situation so that they can better prepare their products. 
 

Below is our exact conversation:

 

Hello, 

 

   Hope you are well. I received the order promptly. I did not see the PING screw in order, perhaps did it not get put 

in shipment? What is the most optimal way to get the proper PING screw?  

 

Thanks in advance. 
—————————————

Hi paul

Thanks for your order. We have updated the standard screw fitting with ping one.

To make them more convenient 

So you don’t need another one 

Pls give a try 

Thanks 

Liam 

[solismr]

@PLLand55So the All-Fit screw is the same size as the #1 Ping screw?

[PLLand55]

@solismr that’s the way I understand it. 

[GetEagle]

On 4/21/2021 at 7:43 AM, PLLand55 said:

Hey guys. Got some feedback from All-Fit. 
 

When I received my order the only component I was missing was the #1 Ping screw, which I believe is longer than standard screw. I will be reaching out to them so that they are aware of my situation so that they can better prepare their products. 
 

Below is our exact conversation:

 

Hello, 

 

   Hope you are well. I received the order promptly. I did not see the PING screw in order, perhaps did it not get put 

in shipment? What is the most optimal way to get the proper PING screw?  

 

Thanks in advance. 
—————————————

Hi paul

Thanks for your order. We have updated the standard screw fitting with ping one.

To make them more convenient 

So you don’t need another one 

Pls give a try 

Thanks 

Liam 

I was told the same way 

what indicated as ping screw is standard using now. Look even more solid this way 

 

[ericft]

5 minutes ago, GetEagle said:

I was told the same way 

what indicated as ping screw is standard using now. Look even more solid this way 

 

not sure what you mean...are you using the standard ping screw that came with the driver, a standard all fit longer PIng screw or something else?

[GetEagle]

15 minutes ago, ericft said:

not sure what you mean...are you using the standard ping screw that came with the driver, a standard all fit longer PIng screw or something else?

Use left side screw for my ping. And with a washer for my callaway. Liam told me it was use as standard allfit screw now. 

[solismr]

@ericftI think what it is is that All-fit changed their standard screw that comes with the adapter to basically be the Ping #1 screw. I placed to separate order for adapters about 3 weeks apart and the second order all-fit screws are exactly the same as my ping#1 screw from my first order.