Jump to content

Bullseye. Boutique experts I need your advice.


Recommended Posts

I’ve always loved a bullseye style putter and tend to move back to that style often. I realize there are a lot of custom putter craftsman but the majority offer Anser styles and not much else. I’m looking to have a flanged bullseye style putter made but would love to hear from you guys ideas of who might be best to design and build it? I’m wanting a more modern blade, a bit larger and in stainless steel. Thanks in advance for any advice. 

Edited by mogc60

Cobra Aero LS 9 Fuji Evo IV 569 X

Honma TR21 15* VIZARD FP7 Stiff

Honma TR21 HY 18* VIZARD UT 7

Honma TR21 HY 21* VIZARD UT 8

Honma TR21X 5-11 VIZARD IBWF 100

HighToe MG3 54* VIZARD IB 120

HighToe MG3 58*/13 VIZARD IB 120

MackMade custom Slide MMT putter                         

 

 

Link to comment
Share on other sites

There are a few guys that can probably do that request or even have that option in stock. These guys either have a Bullseye or probably can make you one, the flange may change that possibility.

 

  • CMD Golf
  • National Custom Works
  • MannKrafted
  • Compass Golf Co
  • MackMade Putters
  • Argolf Putters - Has a flange style in stock

I'm sure there are more and I'm sure I'm missing a ton but may come down to searching their social media and sending some emails. 

Lefty - WITB Thread

Driver: 10° Cobra LTDxLS | AD-IZ 6X 

3W: 15° Callaway Paradym X | AD-IZ 7X

3H: 19° Ping G410 | Tensei CK Pro Orange 90TX

Irons: PXG 0311P 4-6 | 0317CB 7-PW | DG 120 X100

Wedges: SM9 50° - 54° - 58° 

Putter(s): Ping PLD Anser 4K | CMD Gauge R | and more. 

Ball: TP5X 2024

Bag: Ghost Katana

Link to comment
Share on other sites

Thank you for those suggestions. The National I’ve seen and looks pretty good. I’ve been out of golf for a year or so and just kinda out of the loop on designers. 

Cobra Aero LS 9 Fuji Evo IV 569 X

Honma TR21 15* VIZARD FP7 Stiff

Honma TR21 HY 18* VIZARD UT 7

Honma TR21 HY 21* VIZARD UT 8

Honma TR21X 5-11 VIZARD IBWF 100

HighToe MG3 54* VIZARD IB 120

HighToe MG3 58*/13 VIZARD IB 120

MackMade custom Slide MMT putter                         

 

 

Link to comment
Share on other sites

I have two of those and I’m just looking for that but a bit more modern, heavier and a bit straighter. 

Cobra Aero LS 9 Fuji Evo IV 569 X

Honma TR21 15* VIZARD FP7 Stiff

Honma TR21 HY 18* VIZARD UT 7

Honma TR21 HY 21* VIZARD UT 8

Honma TR21X 5-11 VIZARD IBWF 100

HighToe MG3 54* VIZARD IB 120

HighToe MG3 58*/13 VIZARD IB 120

MackMade custom Slide MMT putter                         

 

 

Link to comment
Share on other sites

I’m in the process of having a custom Nicoll blade made from National Custom. Ari has been great to work with and sounds like they gonna get me exactly what I’m looking for. Pretty excited to get this done

  • Like 1

Cobra Aero LS 9 Fuji Evo IV 569 X

Honma TR21 15* VIZARD FP7 Stiff

Honma TR21 HY 18* VIZARD UT 7

Honma TR21 HY 21* VIZARD UT 8

Honma TR21X 5-11 VIZARD IBWF 100

HighToe MG3 54* VIZARD IB 120

HighToe MG3 58*/13 VIZARD IB 120

MackMade custom Slide MMT putter                         

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Here’s my first CAD on my National Custom Works Nicoll. It’s slightly larger than there standard head with curved hosel with half shaft offset and weighting to be face balanced. 

286F622E-B0BD-43C4-992E-08F3AC8EFD89.jpeg

573D2BCB-63C0-4700-9EF0-E6A884B74B0C.jpeg

C3FF48A1-51E2-4A17-A9DB-40AB8B079376.jpeg

Edited by mogc60
  • Like 3

Cobra Aero LS 9 Fuji Evo IV 569 X

Honma TR21 15* VIZARD FP7 Stiff

Honma TR21 HY 18* VIZARD UT 7

Honma TR21 HY 21* VIZARD UT 8

Honma TR21X 5-11 VIZARD IBWF 100

HighToe MG3 54* VIZARD IB 120

HighToe MG3 58*/13 VIZARD IB 120

MackMade custom Slide MMT putter                         

 

 

Link to comment
Share on other sites

  • 3 weeks later...

That putter is sick I really like it!! I am a bullseye style fan myself have been using an Argolf Merlin for about 2 years now.  What is the head weight? Yours looks really clean I really like the lines of it. Congrats let us know how you like it and post some actually pics when you get it.

WITB
 Ping G425 Oban Kiyoshi White 65 stiff
Titleist TSR2+  Oban Kiyoshi White 65 stiff
Titleist TS3  18* set to C1 Oban Kiyoshi White 65 stiff
Callaway UW 21* Oban Kiyoshi white 75 stiff
Ping I210 5-UW Veylix arcane copper mod 1010
Edel SMS V grind  54* Accra SP Wedge 
Edel SMS V grind 58* Accra Hybrex Wedge
SiK DW 2.0 slant neck LA Golf Soho Green or Argolf Merlin Accra FX200 shaft
Titleist ProV1 Yellow

Link to comment
Share on other sites

On 4/2/2021 at 1:47 PM, mogc60 said:

Here’s my first CAD on my National Custom Works Nicoll. It’s slightly larger than there standard head with curved hosel with half shaft offset and weighting to be face balanced. 

286F622E-B0BD-43C4-992E-08F3AC8EFD89.jpeg

573D2BCB-63C0-4700-9EF0-E6A884B74B0C.jpeg

C3FF48A1-51E2-4A17-A9DB-40AB8B079376.jpeg

 

Glad to see you're getting what you wanted also definitely a unique piece with the offset and flange as well. 

Lefty - WITB Thread

Driver: 10° Cobra LTDxLS | AD-IZ 6X 

3W: 15° Callaway Paradym X | AD-IZ 7X

3H: 19° Ping G410 | Tensei CK Pro Orange 90TX

Irons: PXG 0311P 4-6 | 0317CB 7-PW | DG 120 X100

Wedges: SM9 50° - 54° - 58° 

Putter(s): Ping PLD Anser 4K | CMD Gauge R | and more. 

Ball: TP5X 2024

Bag: Ghost Katana

Link to comment
Share on other sites

2 hours ago, VA golfer said:

That putter is sick I really like it!! I am a bullseye style fan myself have been using an Argolf Merlin for about 2 years now.  What is the head weight? Yours looks really clean I really like the lines of it. Congrats let us know how you like it and post some actually pics when you get it.

Thanks.  The headweight is 380 but I’ve used a longer putter for probably 15 years. My putter is 39” and I grip it at probably 35.5”.  Then just putt like normal. A long time ago I was lengthening a putter and had a piece of shaft sticking out 5 inches prior to cutting it to length. I hit some putts with it like that and loved the feel of it and it just stuck. So that explains why the extra weight. Yes the lines are very clean and it will have a center line on the topline. I wasn’t sure where the hosel position would end up to achieve the face balance but after I saw where it was I had room for the line on top. I kindof tried to morph the looks of my 4-5 favorite blades I’ve ever used and put the best of each one into the putter design. I’m pretty excited to see how it turns out. I’ll post pics once I get it. 

Cobra Aero LS 9 Fuji Evo IV 569 X

Honma TR21 15* VIZARD FP7 Stiff

Honma TR21 HY 18* VIZARD UT 7

Honma TR21 HY 21* VIZARD UT 8

Honma TR21X 5-11 VIZARD IBWF 100

HighToe MG3 54* VIZARD IB 120

HighToe MG3 58*/13 VIZARD IB 120

MackMade custom Slide MMT putter                         

 

 

Link to comment
Share on other sites

  • 3 weeks later...
On 3/20/2021 at 2:44 AM, j.a. said:

Kari Lajosi made me two L-blades flange or Bullseye flange, one in CS and the other in SS. He also makes standard blades with two faces. Mine are wonderful, great feeling and beautiful craftsmanship.

 

 

2D569952-B7BC-4FAE-B02B-5831FE5BD524.jpeg

53019F63-8177-47CA-9992-FE69D6C27E38.jpeg

 

If you come across any photos  of Kari's standard blade (two faces) Bullseye style putters, please post them here. I am interested to buy Bullseye blade (no flange) style putters. Thanks.

Cleveland TL310 10.5* driver

Cleveland HB Launcher 15* 3-wood

Srixon H65  19* 3 hybrid and 22* 4 hybrid

Mizuno MP63 5 thru 9-iron

Cleveland RTX 48-52-56-64 wedges

Scotty Cameron Classic III putter

 

Link to comment
Share on other sites

38 minutes ago, Fairway14 said:

 

If you come across any photos  of Kari's standard blade (two faces) Bullseye style putters, please post them here. I am interested to buy Bullseye blade (no flange) style putters. Thanks.


Google search for:

 

kari lajosi bullseye

 

returns photos that you’re looking for.

  • Like 1
Link to comment
Share on other sites

3 minutes ago, JeffreySpicoli said:


Google search for:

 

kari lajosi bullseye

 

returns photos that you’re looking for.

 

Thanks. I did find one example of a Lajosi Bullseye style blade. Here it is along with a Titleist-Cameron Bullseye blade. 

The Cameron head shape is more slender, rounded than the Lajosi. 

Lajosi L Blade.jpg

IMG_8245.JPG

Cleveland TL310 10.5* driver

Cleveland HB Launcher 15* 3-wood

Srixon H65  19* 3 hybrid and 22* 4 hybrid

Mizuno MP63 5 thru 9-iron

Cleveland RTX 48-52-56-64 wedges

Scotty Cameron Classic III putter

 

Link to comment
Share on other sites

On 3/10/2021 at 3:29 PM, mogc60 said:

I’ve always loved a bullseye style putter and tend to move back to that style often. I realize there are a lot of custom putter craftsman but the majority offer Anser styles and not much else. I’m looking to have a flanged bullseye style putter made but would love to hear from you guys ideas of who might be best to design and build it? I’m wanting a more modern blade, a bit larger and in stainless steel. Thanks in advance for any advice. 

LaMont (Mannkrafted) can absolutely make you one.

 

My dad played a bullseye forever, I remember it being in his bag from when I was younger all the way through college and even after.  As he got older he needed a little more head weight, and I got in touch with LaMont.  My dad is also left handed, but plays golf right handed.   He loved his bullseye and hitting shorter puts left handed.  SO I set LaMont to work, he made it in brass and we added some size and some thickness and milled loft into both sides with the shaft dead neutral.

 

Now he made the one for my dad out of brass, but knowing LaMont like I do I know he can make it out of whatever material you want, and he can make it with a flange or however you want it without an issue.

 

I went looking through his instagram to see if I could find pictures of my dad's but it was made quite a few years ago, but I did find this.

BE Flange.jpg

Edited by driveandputtmachine
  • Like 2
  • Driver - Ping G430 Max 10k - Ventus Black 6X | Ping G430 LST 10.5 - Aldila Rogue White 130 MSI TX
  • 3 Wood - Taylormade 300 Mini 13.5 - Ventus Purple X
  • 5 Wood - Ping G430 Max - Ventus Purple X 
  • 7 Wood - Ping G430 Max - Ventus Purple X | 4 iron - Srixon ZX4 MKII - Axiom 105X
  • 5 - GW Cobra King Tour - Axiom 105X
  • SW - Cleveland RTX6 55* - Fuji Tour Spec 115X | LW - Vokey SM9T 60* - Fuji Tour Spec 115X
  • Putters - Odyssey #7 Knuckle Neck Proto | Odyssey Jailbird Versa Microhinge - Odyssey Tank DBOdyssey Jailbird Ai-One
Link to comment
Share on other sites

26 minutes ago, driveandputtmachine said:

LaMont (Mannkrafted) can absolutely make you one.

 

My dad played a bullseye forever, I remember it being in his bag from when I was younger all the way through college and even after.  As he got older he needed a little more head weight, and I got in touch with LaMont.  My dad is also left handed, but plays golf right handed.   He loved his bullseye and hitting shorter puts left handed.  SO I set LaMont to work, he made it in brass and we added some size and some thickness and milled loft into both sides with the shaft dead neutral.

 

Now he made the one for my dad out of brass, but knowing LaMont like I do I know he can make it out of whatever material you want, and he can make it with a flange or however you want it without an issue.

 

I went looking through his instagram to see if I could find pictures of my dad's but it was made quite a few years ago, but I did find this.

BE Flange.jpg

That’s a really nice looking putter. Thank you for the response. I might contact him to see what he could do. 

Cobra Aero LS 9 Fuji Evo IV 569 X

Honma TR21 15* VIZARD FP7 Stiff

Honma TR21 HY 18* VIZARD UT 7

Honma TR21 HY 21* VIZARD UT 8

Honma TR21X 5-11 VIZARD IBWF 100

HighToe MG3 54* VIZARD IB 120

HighToe MG3 58*/13 VIZARD IB 120

MackMade custom Slide MMT putter                         

 

 

Link to comment
Share on other sites

18 hours ago, Fairway14 said:

 

If you come across any photos  of Kari's standard blade (two faces) Bullseye style putters, please post them here. I am interested to buy Bullseye blade (no flange) style putters. Thanks.


There are a few in Kari’s IG:

 

LP454 in GSS satin finish

L-blade Titanium Nickel finish

L-blade in 303SS

L-blade black with deep milling


Kari does the milling himself, so it would be a matter of asking if he can make it as rounded as the Cameron. 

Edited by j.a.
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Our picks

    • 2024 Valspar Championship WITB Photos (Thanks to bvmagic)- Discussion & Links to Photos
      This weeks WITB Pics are from member bvmagic (Brian). Brian's first event for WRX was in 2008 at Bayhill while in college. Thanks so much bv.
       
      Please put your comments or question on this thread. Links to all the threads are below...
       
       
       
       
        • Like
      • 31 replies
    • 2024 Arnold Palmer Invitational - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
      General Albums
       
      2024 Arnold Palmer Invitational - Monday #1
      2024 Arnold Palmer Invitational - Monday #2
      2024 Arnold Palmer Invitational - Monday #3
       
       
       
       
      WITB Albums
       
      Matt (LFG) Every - WITB - 2024 Arnold Palmer Invitational
      Sahith Theegala - WITB - 2024 Arnold Palmer Invitational
       
       
       
       
       
      Pullout Albums
       
      New Cameron putters (and new "LD" grip) - 2024 Arnold Palmer Invitational
      New Bettinardi MB & CB irons - 2024 Arnold Palmer Invitational
      Custom Bettinardi API putter cover - 2024 Arnold Palmer Invitational
      Custom Swag API covers - 2024 Arnold Palmer Invitational
      New Golf Pride Reverse Taper grips - 2024 Arnold Palmer Invitational
       
       
       
       
       
       
       
        • Like
      • 15 replies
    • 2024 Cognizant Classic - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
       
      General Albums
       
      2024 Cognizant Classic - Monday #1
      2024 Cognizant Classic - Monday #2
      2024 Cognizant Classic - Monday #3
      2024 Cognizant Classic - Monday #4
       
       
       
      WITB Albums
       
      Brandt Snedeker - WITB - 2024 Cognizant Classic
      Max Greyserman - WITB - 2024 Cognizant Classic
      Eric Cole - WITB - 2024 Cognizant Classic
      Carl Yuan - WITb - 2024 Cognizant Classic
      Russell Henley - WITB - 2024 Cognizant Classic
      Justin Sun - WITB - 2024 Cognizant Classic
      Alex Noren - WITB - 2024 Cognizant Classic
      Shane Lowry - WITB - 2024 Cognizant Classic
      Taylor Montgomery - WITB - 2024 Cognizant Classic
      Jake Knapp (KnappTime_ltd) - WITB - - 2024 Cognizant Classic
       
       
       
      Pullout Albums
       
      New Super Stoke Pistol Lock 1.0 & 2.0 grips - 2024 Cognizant Classic
      LA Golf new insert putter - 2024 Cognizant Classic
      New Garsen Quad Tour 15 grip - 2024 Cognizant Classic
      New Swag covers - 2024 Cognizant Classic
      Jacob Bridgeman's custom Cameron putter - 2024 Cognizant Classic
      Bud Cauley's custom Cameron putters - 2024 Cognizant Classic
      Ryo Hisatsune's custom Cameron putter - 2024 Cognizant Classic
      Chris Kirk - new black Callaway Apex CB irons and a few Odyssey putters - 2024 Cognizant Classic
      Alejandro Tosti's custom Cameron putter - 2024 Cognizant Classic
       
       
       
       
       
       
       
       
        • Like
      • 2 replies
    • 2024 Genesis Invitational - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
      General Albums
       
      2024 Genesis Invitational - Monday #1
      2024 Genesis Invitational - Monday #2
      2024 Genesis Invitational - Tuesday #1
      2024 Genesis Invitational - Tuesday #2
      2024 Genesis Invitational - Tuesday #3
      2024 Genesis Invitational - Tuesday #4
       
       
       
       
      WITB Albums
       
      Rory McIlroy - WITB - 2024 Genesis Invitational
      Sepp Straka - WITB - 2024 Genesis Invitational
      Patrick Rodgers - WITB - 2024 Genesis Invitational
      Brendon Todd - WITB - 2024 Genesis Invitational
      Denny McCarthy - WITB - 2024 Genesis Invitational
      Corey Conners - WITB - 2024 Genesis Invitational
      Chase Johnson - WITB - 2024 Genesis Invitational
      Tiger Woods - WITB - 2024 Genesis Invitational
      Tommy Fleetwood - WITB - 2024 Genesis Invitational
      Matt Fitzpatrick - WITB - 2024 Genesis Invitational
      Si Woo Kim - WITB - 2024 Genesis Invitational
      Viktor Hovland - WITB - 2024 Genesis Invitational
      Wyndham Clark - WITB - 2024 Genesis Invitational
      Cam Davis - WITB - 2024 Genesis Invitational
      Nick Taylor - WITB - 2024 Genesis Invitational
      Ben Baller WITB update (New putter, driver, hybrid and shafts) – 2024 Genesis Invitational
       
       
       
       
       
      Pullout Albums
       
      New Vortex Golf rangefinder - 2024 Genesis Invitational
      New Fujikura Ventus shaft - 2024 Genesis Invitational
      Tiger Woods & TaylorMade "Sun Day Red" apparel launch event, product photos – 2024 Genesis Invitational
      Tiger Woods Sun Day Red golf shoes - 2024 Genesis Invitational
      Aretera shafts - 2024 Genesis Invitational
      New Toulon putters - 2024 Genesis Invitational
      Tiger Woods' new white "Sun Day Red" golf shoe prototypes – 2024 Genesis Invitational
       
       
       
       
       
      • 22 replies
    • 2024 Waste Management Phoenix Open - Discussion and Links to Photos
      Please put and questions or comments here
       
       
       
       
      General Albums
       
      2024 Waste Management Phoenix Open - Monday #1
      2024 Waste Management Phoenix Open - Monday #2
       
       
       
       
      WITB Albums
       
      Ben Taylor - WITB - 2024 Waste Management Phoenix Open
      Garrick Higgo - WITB - 2024 Waste Management Phoenix Open
      Billy Horschel - WITB - 2024 Waste Management Phoenix Open
      Justin Lower - WITB - 2024 Waste Management Phoenix Open
      Lanto Griffin - WITB - 2024 Waste Management Phoenix Open
      Bud Cauley - WITB - 2024 Waste Management Phoenix Open
      Corbin Burnes (2021 NL Cy Young) - WITB - 2024 Waste Management Phoenix Open
      Greyson Sigg - WITB - 2024 Waste Management Phoenix Open
      Charley Hoffman - WITB - 2024 Waste Management Phoenix Open
      Nico Echavarria - WITB - 2024 Waste Management Phoenix Open
      Victor Perez - WITB - 2024 Waste Management Phoenix Open
      Sami Valimaki - WITB - 2024 Waste Management Phoenix Open
      Ryo Hisatsune - WITB - 2024 Waste Management Phoenix Open
       
       
       
       
       
       
      Pullout Albums
       
      Jake Knapp's custom Cameron putters - 2024 Waste Management Phoenix Open
      New Cameron putters - 2024 Waste Management Phoenix Open
      Tyler Duncan's custom Cameron putter - 2024 Waste Management Phoenix Open
      Greyson Sigg's custom Cameron putters - 2024 Waste Management Phoenix Open
      Sunjae Im's custom Cameron putter - 2024 Waste Management Phoenix Open
      Ping's Waste Management putter covers - 2024 Waste Management Phoenix Open
      Vincent Whaley's custom Cameron - 2024 Waste Management Phoenix Open
      Odyssey Waste Management putter covers - 2024 Waste Management Phoenix Open
      Super Stroke custom grips - 2024 Waste Management Phoenix Open
      Cameron putters - 2024 Waste Management Phoenix Open
      Zac Blair's custom Cameron putter - 2024 Waste Management Phoenix Open
      Bettinardi Waste Management putter covers - 2024 Waste Management Phoenix Open
       
       
       
       
       
       

       
      • 12 replies

×
×
  • Create New...