AD DI 7S tipping- HELP PLEASE!

[CaptainBogey]

Hello - I bought an Orange Graphite Design AD DI 7S and I want to make sure I've tipped it correctly for my PING G410 5W and 7W.  I have the PING G410 fairway wood adapter on it and it measures exactly 24.25 inches to the first ring.  Can anyone tell me if this has been tipped and if so by how much?  I've search WRX and other sites but found conflicting information. From what I've seen online, the PING G410 adapter sleeve adds 0.5" but I could be wrong.  But if I'm right, that would mean from tip to first ring is 23.75 inches.  Any help would be very much appreciated.  Thank you in advance!

 

PS - From what I've seen from ProChoiceGolfShafts.com, a 5W/7W should both be tipped 1".  If anyone could confirm this is accurate I'd appreciate it.  

[Seamus_McDuff]

Yes, 1” is what GD recommends for a 5W or 7W. 
 

If the numbers in this thread and the numbers you’ve given are right, yours is tipped 1”. 
 

 

[Aviador Naval]

This thread is apropos as I have recently acquired 6 AD-DI shafts for next to nothing via a few used club bins in Japan - 6S, 6X & 7X in woods and  85S, 95S, & 95X in hybrid.

 

I'm trying to sort out a discrepancy between the link posted above by @Seamus_McDuff and a separate thread linked within by @easyyy quoting an exchange with a reply from @Graphite Design Sales. 

 

The applicable passages are:

 

From first thread in a cut & paste compilation of previous posts:

 

"...An AD DI 6X is an inch shorter to the first green ring [i.e., 23.75"] than a 6S [24.75"], so a 6S tipped an inch (to give X flex equivalent) will have rings aligning to 6X out of the factory..."

 

From the second thread:

 

@jmcdonald states:  "...Just wanted to let everyone know that has a Black Tour AD DI shaft that the measurement from the tip of the shaft to the beginning of the first ring should be 25 3/4" for an un-tipped shaft. Got that info from Pro Choice(Graphite Design) yesterday. The Orange is a different measurement, 24 5/8" to the first green ring.

 

To which, @Graphite Design Sales replies  "...jmcdonald has it right.  The measurement for the other Tour AD Wood models of DJ, BB, GT, MT, MJ, M9003 and GP are also 24 5/8" from the tip to the first ring in the graphics closest to the tip on a brand new shaft. For the Tour DI Hybrids, it is 21 5/16", for the Tour HY hybrids it is 20 7/8". The Tour AD 9003's are 25 3/4..."

 

Discounting the 1/8" difference in base measurement between the two posts (24-5/8 vs 24-3/4), there is no mention that the X in any model, including the Tour AD-DI woods, has peculiar graphics that fall outside the norm for the series other than the single stray tron from the first thread.

 

I'm inclined to go with 'no difference' since none is mentioned by @Graphite Design Sales but am wondering if anyone else corroborating information.

 

Thanks.

[HitBombs]

Hey guys, gunna revive this thread. Have an AD Di 9X that’s 24 5/8” from end of ping tip to first green ring. Has that shaft been tipped at all? It’s the new graphics ad di orange 

 

In some previous threads I read that the 6x and 7x have different measurements, Is that the case? 
 

thanks

Edited December 13, 2022 by HitBombs

[HitBombs]

Called Bill at Pro Choices (Graphite Design) and he said measurement is 24 3/4" tip to first green ring is No tipping. Whether it be a 6x/7x/8x/9x the measurement is the same. 

 

Hopefully this helps anyone in the future 

Edited December 14, 2022 by HitBombs

[third-times-a-charm]

42 minutes ago, HitBombs said:

Called Bill at Pro Choices (Graphite Design) and he said measurement is 24 3/4" tip to first green ring is No tipping. Whether it be a 6x/7x/8x/9x the measurement is the same. 

 

Hopefully this helps anyone in the future 

Correct but you need to take the adapter tip into account as that is for the raw shaft.

[HitBombs]

40 minutes ago, third-times-a-charm said:

Correct but you need to take the adapter tip into account as that is for the raw shaft.

 

Thanks for the info! im assuming for most adapters this would add around 0.25"?

[third-times-a-charm]

18 minutes ago, HitBombs said:

 

Thanks for the info! im assuming for most adapters this would add around 0.25"?

No, most are .5" IIRC

 

 

[sadclevelandsports]

Sorry to revive an old thread with a quasi unrelated question, just didn't want to start a whole new thread for this.

 

Can someone put to bed whether or not tipping the AD DI makes it play softer or stiffer? I have read some posts that say that the addi tip specifically gets less stiff as you move down, so tipping can make the shaft less stiff. Ive also read the opposite. Is there a consensus correct answer in regards to this?

Edited January 27, 2023 by sadclevelandsports

[Qegurezi]

Tipping will make it (the DI) stiffer every single time. 

Edited January 27, 2023 by Qegurezi

[sadclevelandsports]

7 hours ago, Qegurezi said:

Tipping will make it stiffer every single time. 

Thanks. Just so I can be educated, I believe I'm misconstruing how EI profiles work, but just because it shows the tip being stiffer, regardless, the shaft will get stiffer if (in an equal shaft length situation) the tip is shortened?

[Qegurezi]

16 minutes ago, sadclevelandsports said:

Thanks. Just so I can be educated, I believe I'm misconstruing how EI profiles work, but just because it shows the tip being stiffer, regardless, the shaft will get stiffer if (in an equal shaft length situation) the tip is shortened?

The tip is still softer than the butt. 

[sadclevelandsports]

37 minutes ago, Qegurezi said:

The tip is still softer than the butt. 

Gotcha, but it would still make the tip play a bit softer correct? So the spin rate may move upwards?

[Golf Pig]

5 hours ago, sadclevelandsports said:

Gotcha, but it would still make the tip play a bit softer correct? So the spin rate may move upwards?

 

I would say yes.

 

https://www.golfshaftreviews.info/technical-stuff/tipping-golf-shaft/

[Qegurezi]

9 hours ago, sadclevelandsports said:

Gotcha, but it would still make the tip play a bit softer correct? So the spin rate may move upwards?

The link above says other but in the real world every time i have tipped DI's they've got a little stiffer with ball flight being a bit more penetrating and stable for me personally. I've only done half a dozen or so tho and 3 or 4 BB's. 

 

Here's another short read for you. You might just have to give it a whirl but i am firmly in the camp that when you tip a graphite shaft it gets stiffer and penetrates a bit more. That's been my experience on course.