Tour New 2021 Titleist irons (Updated w/ Links to in-hand photos)

[Biff80]

That’s Titleists way of saying hope to have your stuff to you by the new year! I called again yesterday and they said they were going to send me some complimentary pro-Vs for the delay but my clubs will probably be another month. They did say they will send the p-6irons within 7-10 days but the 4 and 5 will be another month. I’m trying to find a stock set in stock somewhere so I can cancel the order and modify to what I want later...

[halfsumo]

I got 1 dozen ProV1x's in the mail today. Pretty nice gesture, IMO. I'm just waiting on a u505. 

 

[MrShield]

5 hours ago, mizuno player said:

So much stuff is on backorder. Ordered a Titleist carbon fiber bag in February. Still waiting. 

 

I'll hold off on new irons until next year. My plan is to go to Manchester for a fitting. Hopefully the shortages will be over with. 

I don’t think that is a good plan. If you want new clubs next season, now is the time to order. 
 

Talked with both Ping and Titleist rep today, and both said the same thing. A lot of people will have a tough wake up call next year if they order during the spring. They will most probably not have their clubs before the season is over - again. 

[Biff80]

Does anyone know if any retailers have the new t series available in-stock?  

[dlow206]

22 minutes ago, Biff80 said:

Does anyone know if any retailers have the new t series available in-stock?  

 

A lot have stock sets in-stock. And one of my local club builders actually has component heads and various shafts in-stock, so i am getting a custom set built right now. 

[Cpk23]

Bring back something close to the 681s

[SMUGamer]

17 hours ago, BCC1898 said:

Got the heralded T Series towel today. Strangely, no explanation or letter as to why I got it. 

There was a note in the package that you were to mail it to me. Just PM me.....🙋🏻‍♂️

[toddba11]

On 10/6/2021 at 9:11 AM, gsxrdn said:

Would love to know where did you get this grip from?

It came on the T200 irons, straight from Titleist………..

Edited October 7, 2021 by toddba11

[mizuno player]

14 hours ago, MrShield said:

I don’t think that is a good plan. If you want new clubs next season, now is the time to order. 
 

Talked with both Ping and Titleist rep today, and both said the same thing. A lot of people will have a tough wake up call next year if they order during the spring. They will most probably not have their clubs before the season is over - again. 

Wow!!!! That's crazy. Thanks for the info. 

[balladm]

I just put a set of T100s on the classifieds for those interested. 

[golffeen007]

Just didn’t like?

Edited October 8, 2021 by golffeen007

[goudok]

So I have a tri set 

T100S 7-PW

T200 5,6 

U505 4 1 degree strong

Went from a similar set from the previous gen just the T200 was 5-7 instead if 5-6.

I've used them for 10 rounds now in hard pan conditions (Vegas) and 5 in Canada soft and just perfect fairways.  Here are my findings.  T100S (for me) feel way better I play an extremely soft ball, I am somewhat of a picker of a ball and honestly I can't say the soles feel that different to me, but I for some reason I am hitting then less thinny (my miss tends to be low on the face), granted I have been working on my swing so not sure how much of that is the iron or working on my swing.  Now the T200, I think they look way better from address to just looking at it, however I think the old ones felt better.  BUT, the performance (for me again) and not sure how much of it has to do with a few swing changes, is better and especially on those 1 groove low shots.  

I got the U505 later so haven't had a chance to use it on the course, but hitting into my net it feels like a supercharged T200, so essentially I went from having 3 different feeling clubs in my previous set to 2 now as at least in my net T200/U505 felt very similar.  

Again take this with a grain of salt as I said I had 3 weeks to work on my swing to stay in better posture through impact and not sure how much of that is translating into hitting better shots or clubs working better for me on low strikes.

 

 

[dlow206]

My new order with my local club builder is delayed until next week. They have all components, im just stuck in their build queue and they won't give me the shafts and heads to build them myself.

 

I had cancelled my original order with Titleist. 

[halfsumo]

My u505 shipped today. Ordered 7/29

[balladm]

18 hours ago, golffeen007 said:

Just didn’t like?

I just don't get along with the shafts I think. They look and feel amazing but I played 3 rounds with them and my ballstriking has suffered. Im going back to my old P760s.

[Biff80]

Ordered from Edwin Watts yesterday and elected overnight shipping. Delivered to my office today. Cancelled my long awaited order from Titleist. I’m keeping the towel, it was a gift!

[golfer55082]

2 hours ago, Biff80 said:

Ordered from Edwin Watts yesterday and elected overnight shipping. Delivered to my office today. Cancelled my long awaited order from Titleist. I’m keeping the towel, it was a gift!

Is stock shaft the only option for in-stock irons? 

[dlow206]

Just now, golfer55082 said:

Is stock shaft the only option for in-stock irons? 

For the major retail stores yes. Some club builders have component heads and various shafts in stock. For example, im having my t300 set built with nippon 950gh. The club builder has everything in stock and ready to go, im just in the build queue

[golfer55082]

1 minute ago, dlow206 said:

For the major retail stores yes. Some club builders have component heads and various shafts in stock. For example, im having my t300 set built with nippon 950gh. The club builder has everything in stock and ready to go, im just in the build queue

Good to know. Good luck to advance in the queue. Had I know this earlier I may look at  this route than the LONG waiting now for the order from Titleist.

[dlow206]

14 minutes ago, golfer55082 said:

Good to know. Good luck to advance in the queue. Had I know this earlier I may look at  this route than the LONG waiting now for the order from Titleist.

The club builder i found in my area is not that big of a shop, so i think there were a handful of builds ahead of me. They said should be done by the end of next week. For reference, i just placed this order about 7 days ago because i was mad at my delayed order with titleist

[Philipp]

On 10/7/2021 at 7:51 AM, MrShield said:

I don’t think that is a good plan. If you want new clubs next season, now is the time to order. 
 

Talked with both Ping and Titleist rep today, and both said the same thing. A lot of people will have a tough wake up call next year if they order during the spring. They will most probably not have their clubs before the season is over - again. 

 

Yes, world supply chain and logisitcs crisis will affect all of us well into mid of 2022 or even longer...

[chasejw88]

20 hours ago, goudok said:

So I have a tri set 

T100S 7-PW

T200 5,6 

U505 4 1 degree strong

Went from a similar set from the previous gen just the T200 was 5-7 instead if 5-6.

I've used them for 10 rounds now in hard pan conditions (Vegas) and 5 in Canada soft and just perfect fairways.  Here are my findings.  T100S (for me) feel way better I play an extremely soft ball, I am somewhat of a picker of a ball and honestly I can't say the soles feel that different to me, but I for some reason I am hitting then less thinny (my miss tends to be low on the face), granted I have been working on my swing so not sure how much of that is the iron or working on my swing.  Now the T200, I think they look way better from address to just looking at it, however I think the old ones felt better.  BUT, the performance (for me again) and not sure how much of it has to do with a few swing changes, is better and especially on those 1 groove low shots.  

I got the U505 later so haven't had a chance to use it on the course, but hitting into my net it feels like a supercharged T200, so essentially I went from having 3 different feeling clubs in my previous set to 2 now as at least in my net T200/U505 felt very similar.  

Again take this with a grain of salt as I said I had 3 weeks to work on my swing to stay in better posture through impact and not sure how much of that is translating into hitting better shots or clubs working better for me on low strikes.

 

 

I have the same split of t-100s & t-200, ordered 8/07 and have not received them. What shafts and grips did you get?

[jjrussell12]

Placed on August 2. My pro just followed up again and was now being told best case is mid December due to “heads have not made it to the factory”. 

[goudok]

On 10/9/2021 at 5:20 AM, chasejw88 said:

I have the same split of t-100s & t-200, ordered 8/07 and have not received them. What shafts and grips did you get?

AMT black s300 and rdx smoke 90 in the 4

[tofur99]

9 hours ago, jjrussell12 said:

Placed on August 2. My pro just followed up again and was now being told best case is mid December due to “heads have not made it to the factory”. 

yeah titleist told me a few days ago that the t-100 heads ordered sept 15th are hopefully showing up in early december

[sloansav62]

Whips came today! Ordered 8/3 through Titleist. Process was far from smooth and not without multiple hiccups but I’ll get to game before season end. 
These definitely have the appearance of blades but forgiveness and crispness of strike is dreamy.

[irnmn77]

Ordered t100 4-P w project 6.5 first week of August. Originally told delivery in September. Three days after original shipment date they told me 10/12. Called to confirm today and now it's December 15. They better send me a towel and a box of PRO V's.  Unfortunately, I'll just hold out since this supply chain problem is going to last well beyond 2022. I stocked up on grips last year, I may even order extra shafts now for next season. 

[HappyGilmore22]

How is the finish holding up on the T100 for everyone? JPX 919 Tours I had looked amazing at first with the more brush finish but started to look pretty dull after only a few weeks.

[Micrys2]

Buddy of mine ordered 6/21 and was just delivered last week.  Does anyone know if it is all heads?  Shafts?  Grips? A combo of all the above?  Looking at the 200’s. 

[dlow206]

So my local club builder who is coming to my rescue, is starting to build my t300 set today. They called and said they are out of nippon 950gh wedge shafts. Luckily, being a WRXer, i happen to have on hand a 950gh wedge shaft, uncut. Going to drop it off and they will use mine, lol