What are your dream irons?

[teedub21]

Left handed Miura Baby Blades that play like a Ping G425 iron. I mean, it does say “dream irons”. 😂

Edited July 19, 2021 by teedub21

[OKMrazor]

1 hour ago, RolandofGilead said:

Ben Hogan Icons, black DBM finish, with black onyx Dynamic Gold S400. Remove all paint fill except sunburst and iron #. Unfortunately I know myself and my game, and playing those would be too frustrating.

I bought my '99 Hogan Apex MBs (used) mostly for the shaft - picked them up for the same price as plenty of the used C-taper pulls on the market at the time.  Decided to play a round before swapping the C-tapers to my AP2s and haven't played the Titleist since.  Not the same clubhead, but certainly similar.  If you love the idea of them it might be worth a demo...      

[Barfolomew]

Huge sweet spot VERY forgiving

Play about 1 club length longer then soft forged irons

No offset

Great Spin numbers

Dont care about aesthetics, No offset is a function thing not looks lol

Bottom groove painted

[benthegolfer]

ZX7s in my bag are closest thing I have found. Love PXG 0311T heads too especially in longer clubs. Maybe a combo set 😆

[asKaasa]

Apex MB 18 raw

MP32

 

Currently gaming CB-1008 raw, great irons!

[RolandofGilead]

4 hours ago, OKMrazor said:

I bought my '99 Hogan Apex MBs (used) mostly for the shaft - picked them up for the same price as plenty of the used C-taper pulls on the market at the time.  Decided to play a round before swapping the C-tapers to my AP2s and haven't played the Titleist since.  Not the same clubhead, but certainly similar.  If you love the idea of them it might be worth a demo...      

Believe me, that decision has swirled through my head many times. If I were to have a second set, these would be it. But I committed to cavity backs when I upgraded irons last year - I care too much about scoring and family life limits my practice time. Besides, acquiring these shafts would be tough and expensive. And I am a value shopper.

[Sean124]

3 hours ago, benthegolfer said:

ZX7s in my bag are closest thing I have found. Love PXG 0311T heads too especially in longer clubs. Maybe a combo set 😆

I just switched from MP5s to 0311Ts. I like them so much I gave the Mizunos to my brother. 
 

From a looks and feel standpoint, these are perfect. I’ll never get rid of them. 

[NoTalentLefty]

A set of irons with 5 degree gaps starting at 30 thru 45 degrees. 50 degree SM7 and a 56 degree SW either Titleist or Cleveland. I have the wedges. 

[EaglesGolf99]

My current mixed set...

 

Miura Giken CW CB•301, 4 Iron through 8 Iron. 

 

Miura Giken CW TB•000, 9 Iron, Raw.

 

Miura Hand Grind 46 | 06, Raw.

 

Miura Hand Grind 52 | 10, Raw.

 

Miura Hand Grind 58 | 10, Raw.

 

Miura Tour Milled High Bounce 64 | 16, Raw. 

 

 

Edited July 20, 2021 by EaglesGolf99

[NRJyzr]

Golden Ram Tour Grinds, with a bit of leading edge to trailing edge camber.  Basically, it could be a brand new set of TW276 with a less sharp leading edge.

 

[Yoshifan151]

681 T (which I am lucky to own), but I'd happily trade those for a set of NCW irons. Impossible to beat a set of irons with every detail customized exactly how I'd want.

Edited July 21, 2021 by Yoshifan151

[14max]

I want Eye2s with modern grooves, reduced offset, stronger lofts, and a multitude of shaft options.  That's not too much to ask...

[jwadds19]

I want Srixon to make a ZX9. Would go 7-P(maybe 6) in those (TI DG X100s), then 4-6 in the ZX7 (same shaft). GP midsize velvet cords. 

 

I love my 945/745 combo currently, but it would be nice to get something new in the bag. 

[tomc262]

I have the two sets I've always wanted! 🙂  The BeCu's are mine from high school and the CB92s are a recent acquisition...the clubs I really wanted but never able.  In a perfect world mine would be the CB92s with a slightly "modernized" sole and a few degrees stronger as the PW in this set is 50*.  As a golfer from the 80's and 90's I don't mind the offset, but if it were reduced just slightly I think it would fit my eye a little better, especially in the CB92s, for some reason it doesn't bother me in the Eye2s. 

 

I guess I should save my money and give @FairwayFred @National Custom Works   National Custom Works a call!! 🙂 

[tomc262]

22 hours ago, RolandofGilead said:

Ben Hogan Icons, black DBM finish, with black onyx Dynamic Gold S400. Remove all paint fill except sunburst and iron #. Unfortunately I know myself and my game, and playing those would be too frustrating.

The Icons are sweet!  

[vtpachyderm]

Cobras RF Proto Rev33s with MMT 105 S shafts. Ideally they’d be murdered out in black but the black shafts and copper heads I could live with 😁. 

 

Pure milled irons look so good to me. I was listing after the TW7s but the Rev33s appeal to me more. 

[DeCuchi]

They don't exist. Something like a u500 3 and 4 iron, with something like a 770 or T100 5-pw or maybe a cb/mb in the short irons/wedge.  All with .5 mm constant offset with a raw finish and non jacked lofts.  Hell I'd take any finish if somebody would make 770/t100 type of iron with minimal constant offset.

[leftylama]

For me a 2021 version of the Nike Vapor Pro Combo (leftie required too)

[EDT501]

[RogerinNewZealand]

Mp100=33s

Tourstage 2008

[ProjectX]

My Srixon ZX7s are perfect. Like so many have said in this thread there is nothing else you could do to make them better. I'm already considering loading up on extra sets for the future. They are that good.

[lefty1978]

I always loved the Mizuno MP32 and being a big TW fan, Nike VR blades. Over the past couple years I was able to purchase both sets and will never sell them.

Edited July 20, 2021 by lefty1978

[easylittle5wood]

Mint set of Mizuno MP-14, 1-PW

 

Quad dot Callaway Tour Authentic X-Prototype always seemed collectible. 
 

I have a 2-PW set of Titleist 681 that are so choice. 

[hammergolf]

For a couple years, Ping would press the offset out of irons. I wish I would have sent some of my Eye 2 irons and wedges and had it done. 

[Stonewalled]

Copper 302's..... check

Stenson Legacy Black's..... check

Ping i59's..... coming very soon hopefully!!!!!

[sleeper]

Three recurring dream sets (in order): 

 

1. NCW DWs (due next month)

 

2. MP-32s with the Luke Donald grind (just like the ones sitting in Danny Lee's garage somewhere)

 

3. A set of Kyoei Duals (eyes peeled)

[jonteistockholm]

This.

 

I never ever thought that I would own Miuras.

 

I allways saw them as blinged, superexpensive overrated irons.

Only thing I can´t stand are the Pw…. Horrible looking but nothing a black SM8 46 couldn´t solve 

 

But… jinx warning… this ones are keepers.

 

 

Edited July 21, 2021 by jonteistockholm

[JungleJimbo]

 

 

3 hours ago, sleeper said:

Three recurring dream sets (in order): 

 

1. NCW DWs (due next month)

 

2. MP-32s with the Luke Donald grind (just like the ones sitting in Danny Lee's garage somewhere)

 

3. A set of Kyoei Duals (eyes peeled)

@sleeper Your post =the 2nd time today, that I’ve heard Kyoei irons mentioned!

(Alongside @texas_golfer’s NSFW “museum pieces” set of Kyoei raw KK CB irons, linked below)

 

Do all the cool kids😎 prefer Kyoei over Miura nowadays? 😜
 

 

 

[36plusHand]

Ironically, I just picked them up in the Classifieds; Yonex TC Forged. They're just as slick as I always imagined 😉

[Bunkersarebigcups]

MP 20 blades. They are just so gorgeuos its unreal.