Miura Copper and Satin Irons are sold but check out these cool Adams CB1 Black Irons and this Cleveland Classic Adjustable Driver for $75!

[Flopit]

Hello fellow WRX gearheads, hope you had a great holiday season.  I have decided to unload some nice sticks and items will ship from Niagara Falls, NY or Toronto depending on the buyer’s location.  All prices are listed in US dollars and include shipping to continental USA and Canada.  PM me with any questions, offers and for my paypal address. I have sold a number of items here and on the Bay with 100% positive feedback.  The only trades I would be interested in are Mizuno St-z  3/5 fairway woods. Thanks for checking out my listing.

 

1) Very rare and gorgeous set of Miura CB202 Straight Neck 4-Pw (includes 3 iron head which has not been hit since the refinish) which were refinished in copper by a local plating shop that has 30 years of experience.  They have seen only 10-15 rounds of play with very minimum range time.  Bag chatter is virtually non-existent as I use an Ogio Silencer bag which locks the clubs in place.  Shafts are Nippon 1150 GH Tour taper tip in stiff flex and I can include a shaft for the 3 iron head but it is parallel tip so the head would need to be reamed to .370.  The grips are Golf Pride standard size MCC red/black and are in very good shape.  These play standard length (37 inch 7 iron) and lies and lofts are also standard as per Miura specs (47 degree Pw).  Swing weights all match at D2.  These irons feel fantastic and now have now formed a beautiful patina.  All waiting for your custom paint fill or go naked like they are now. 

$990 Now $940 Now $old

 

2) Miura 51 degree gap copper wedge with Nippon Modus 125 stiff flex.  Plays 35.5 inches long, D3 swing weight with Golf Pride MCC Teams grip in very good shape.  This wedge would match the set above perfectly and has had limited play.  Great patina on this one also and the feel is magnificent.

SOLD

 

3) Miura CB202 Straight Neck 4-Pw in original satin nickel finish.  I purchased the heads used and installed a brand new set of Matrix Program F15 120 gram stiff flex shafts (these shafts originally retailed for over $700 a set).  Standard steel lengths (37 inch 7 iron), standard lofts/lies as per Miura specs and swing weights are D2 with no tip weights added.  Grips are MCC teams standard size in very good shape and match the custom ferrules very nicely.  The shafts play very much like Dynamic Gold S300 in terms of flight but the vibration dampening properties are great especially if you battle any sort of injuries like I do.  Shafts and grips are logo at the back.  Heads do have chatter as I bought them used and there is a rock ding on the sole of the 7 iron.  Grooves are still very good and spin the ball well.  This would be a great set for someone looking for the buttery feel of a Miura forging but wants the vibration dampening of a high quality standard weight graphite shaft.

$590 Now $540 Now $old

 

 

4) Adams DHY 21 degree 3iron DHY 24 degree 4 iron along with CB1 Black 5-Gw (I will include the matching 4 iron head and ferrule).  The DHY’s have Matrix White Tie 80 gram stiff shafts and Golf Pride MCC red/black grips.  The 5-Gw have Matrix F15 85 gram stiff flex shafts and Golf Pride Tour 25 grips which allowed me to make these standard length (37 inch 7 iron) while still achieving D3 swing weights (DHY’s are D2 swing weight).  I purchased the shafts and grips brand new.  The heads were purchase used and then I had my local plating shop sand blast all the faces and toplines so they frame the ball very nicely.  These feel very smooth and launch a bit higher than the satin CB202’s but the shafts are play pretty tight for 85 grams.  Great set if want to try a light weight iron shaft without sacrificing any accuracy.  Logos of the shafts and grips at the back on the 5-Gw and ferrules need to be turned down a bit but I may be able to get that done prior to shipping when my clubmaker opens after the holiday break.

$490 Now $440 Now $400 

 

Here is a link to the specs: https://www.2ndswing.com/adams/golf-irons-and-iron-sets/idea-pro-black-cb1/

 

5) Cleveland Classic XL Custom adjustable 10.5 driver with Miyazaki B Asha 4S stiff flex shaft which plays 47 inches long.  I bought it to try a longer playing driver but did not remove the grip so I am not sure if it has an extension (seller on ebay said it didn’t but I can’t verify).  Head and shaft are in very good shape and it has hardly been hit.  I don’t have the matching cover but will include a yellow/black RBZ driver cover.  If you want to try a longer shafted driver or cut it down to standard this driver has penetrating low spin flight and still gets plenty of distance.  It also looks very cool with a blend of retro and modern.

$90 Now $80 Now $75 

 

Here is a link with a review: https://www.independentgolfreviews.com/cleveland-classic-xl-custom-driver/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pin 1/8

pin 1/16

Edited January 22, 2022 by Flopit
Sold items

[AndrewG0608]

Those Adams tho 😳 Love the MB2 black frankeniron I have. 
Wonder how long I’d be on the couch if those showed up… 

[Flopit]

Prices lowered on all items.  Great forged iron sets here folks 

[drewjdaniels]

Would you take $110 for the gap wedge only? I have a set of MC-501.

[Flopit]

Sent you a PM

[Flopit]

 Make an offer, all the irons look better is person. 

[T-MAC]

Great irons.
Those Adams CB1's are butter.  I believe Tom Watson played a set of those.
I went through a set of CB1's, 2 sets of CB2's, and a set of CB3's.  Adams made some terrific forged irons back then.

[SteveSR]

Interested in the Miura coppers but not a member here.  How to contact?

[Flopit]

Thanks T-Mac, the Adams CB line are definitely underrated.  All 3 iron sets feel buttery but the coppers are like melted butter on hot toast!  

[Flopit]

6 hours ago, SteveSR said:

Interested in the Miura coppers but not a member here.  How to contact?

I sent you a private message or you can email: [email protected] which is also is my Paypal address

Edited January 14, 2022 by Flopit

[Jon Gee]

Does the Cleveland driver come with the OEM wrench?

[Flopit]

3 hours ago, Jon Gee said:

Does the Cleveland driver come with the OEM wrench?

Sorry no wrench although it can be adjusted using an Allan key or square head screw driver

[Shatzi1321]

Muira cb 202's still available?

 

Edited January 20, 2022 by Shatzi1321

[Flopit]

11 minutes ago, Shatzi1321 said:

Muira cb 202's still available?

 

Yes they are still available 

[Jwat]

Per our agreement, I’ll take both sets of miuras…

[Flopit]

Miura irons sold and heading to the Lone Star State.  Thanks Jwat!