SeeMore Putters - NEW 2022 Classic Series Putters

[SeeMore Putters]

(Franklin, TN) The SeeMore Putter Company is internationally renowned for helping golfers of all skill levels improve their putting and lower their scores through its proprietary, patented and proven RifleScope Technology (RST) alignment system so all you need to do is "Hide the Red Dot."

 

• Model B - Brings the look of a classic heel and toe weighted blade with the mid-back flange weight block of the Original FGP repositioned into enhanced heel and toe weighting
• Model C - Accurate and forgiving, it has a dramatic pure center shaft blade with a slightly longer and lower profile for improved heel and toe weighting and greater stability
• Model M - A new squared-off mallet which should appeal to those who prefer blades, featuring a straight, center shaft, small mallet with a very clean look
• Model T - An extreme heel and toe weighted mallet with a deep cut away for the ultimate in perimeter weighting for tremendous stability with a shape that also enhances alignment

The 4 new designs pictured below, and the entire new look Classic Series, are available as of April 7, 2022.  To learn more about the new Classic Series putter lineup - Click HERE. (We've upgraded out website, so if you've visited us before, you'll need to refresh your cache.)

 

Edited April 20, 2022 by SeeMore Putters

[tider992010]

Great looking addition to the line.  Really like the Model T! 

[SeeMore Putters]

Solid putters and Model T is on fire!  Getting some great feedback from all of them.  Thanks.

[Wham49]

love my 2 seemore's, they just feel so balanced, the C model looks interesting

[SeeMore Putters]

On 5/6/2022 at 8:12 AM, Wham49 said:

love my 2 seemore's, they just feel so balanced, the C model looks interesting

Model C is a good feeling putter.  Thanks for being a part of Team SeeMore and spreading the word.  Appreciate it!

[Myherobobhope]

On 5/6/2022 at 9:04 AM, SeeMore Putters said:

Solid putters and Model T is on fire!  Getting some great feedback from all of them.  Thanks.

Oh man.. can't do it quite yet, but definitely going to get a Model T built out to my specs!

[SeeMore Putters]

1 hour ago, Myherobobhope said:

Oh man.. can't do it quite yet, but definitely going to get a Model T built out to my specs!

Always happy to help.  Reach out anytime!

[tider992010]

I putted with the M at PGA superstore and it felt great off the face.  Will any of them be set up for the offset shaft?

[SeeMore Putters]

On 6/5/2022 at 6:39 AM, tider992010 said:

I putted with the M at PGA superstore and it felt great off the face.  Will any of them be set up for the offset shaft?

The model M is a great feeling putter.  The M will not have an offset option.  However, the model T is available in offset and RST hosel.  Feel free to send us a note at [email protected].  Always happy to help and thanks for trying out the M.

[getair23]

Great looking heads with a great pricepoint.  How do these feel/sound  compared to the milled series?

[SeeMore Putters]

16 hours ago, getair23 said:

Great looking heads with a great pricepoint.  How do these feel/sound  compared to the milled series?

The insert being milled 303 SS is going to be almost the same sound and feel coming off the ball.  If anything the new models might have a little more of a "softer" sound.

[CUBuffaloes]

Just placed my order for a PCB was going back and forth between that and the Nashville One. I love the look of both but went with the more budget friendly model. Can't wait to get it.

 

[FenderSpots]

Certainly intriguing. 

I've only used a SeeMore in a shop, but never on course. Maybe this should change soon. At first glance the Model M would be the first one I would gravitate towards. 

[SeeMore Putters]

7 hours ago, CUBuffaloes said:

Just placed my order for a PCB was going back and forth between that and the Nashville One. I love the look of both but went with the more budget friendly model. Can't wait to get it.

 

Fantastic!  When you get it let us know.  Have a great week.  Thanks for being a part of the family.

[getair23]

@SeeMore Putters I am torn between the B, C, and M.  In a fitting it was recommended that I play face balanced/ 0*'s of toe hang.  Should this rationale have any influence between the B, C, or M with different degrees of toe hang?  

[SeeMore Putters]

47 minutes ago, getair23 said:

@SeeMore Putters I am torn between the B, C, and M.  In a fitting it was recommended that I play face balanced/ 0*'s of toe hang.  Should this rationale have any influence between the B, C, or M with different degrees of toe hang?  

@getair23 The Model B and Model C are face balanced at impact meaning that the putter wants to return to a square putter face at impact (like when you started at set-up position).  Golfers choose the Model M because they like the look of it and we know that hiding the red dot will allow them to get in a consistent set-up as well as learn "what his/her putt feels like".  If you are wanting something that is 100% SeeMore (face balanced at impact) which allows you to have the putter face return to square without any manipulation in your hands or putting stroke.  Option B or C might be best.  

 

Thanks for reaching out.  If you are looking for more, feel free to send us a note at [email protected].  More than happy to help.

Edited August 16, 2022 by SeeMore Putters

[getair23]

12 hours ago, SeeMore Putters said:

@getair23 The Model B and Model C are face balanced at impact meaning that the putter wants to return to a square putter face at impact (like when you started at set-up position).  Golfers choose the Model M because they like the look of it and we know that hiding the red dot will allow them to get in a consistent set-up as well as learn "what his/her putt feels like".  If you are wanting something that is 100% SeeMore (face balanced at impact) which allows you to have the putter face return to square without any manipulation in your hands or putting stroke.  Option B or C might be best.  

 

Thanks for reaching out.  If you are looking for more, feel free to send us a note at [email protected].  More than happy to help.

Great info, thank you.  Now my bid dilemma is which headcover to pick.  I'll likely order both!

Edited August 17, 2022 by getair23

[getair23]

Placed the order yesterday.  Responsiveness and support of WRX is otherworldly.  Can't wait to roll my new SeeMore!

 

 

[getair23]

Additionally when I emailed a question to [email protected] asking how wide the alignment lines were on the Model C compared to the width of a golf ball.  I received this picture pretty quickly with a nice note and personal contact info from Jim.   @SeeMore Putters is my new favorite golf company, looking forward do doing more business with them.  

 

Edited August 17, 2022 by getair23

[SeeMore Putters]

18 hours ago, getair23 said:

Additionally when I emailed a question to [email protected] asking how wide the alignment lines were on the Model C compared to the width of a golf ball.  I received this picture pretty quickly with a nice note and personal contact info from Jim.   @SeeMore Putters is my new favorite golf company, looking forward do doing more business with them.  

 

#family - SeeMorean for life.  Always happy to help.  Have a great day!

[CUBuffaloes]

On 8/17/2022 at 8:24 AM, getair23 said:

Additionally when I emailed a question to [email protected] asking how wide the alignment lines were on the Model C compared to the width of a golf ball.  I received this picture pretty quickly with a nice note and personal contact info from Jim.   @SeeMore Putters is my new favorite golf company, looking forward do doing more business with them.  

Agree - great bunch of folks to work with. They go above and beyond to make sure you get a product that works for you. 

[SeeMore Putters]

PVD Model M is getting some great love.  Great looking putter.

[Honeybadger]

Hi. Can these be bent? Do they have the internal hosel thingy? 
I was looking at the C at PGA SS and was wondering if they could bend it to 68*. 
Thanks!