Bending old BeCu ping eye 2's in Phoenix area

[ALIF]

I have an old set of BeCu ping eye 2 irons that Ping won't bend anymore. Anyone know of a good shop or builder who is competent to bend these in the Phoenix area? I live in Chandler. Thanks!

[fore_life]

Check out Arizona golf works in Tempe up on university just Weston McClintock, I won't take club repairs anywhere else.

[fore_life]

*east of McClintock

[ALIF]

Thanks fore_life:)

[dalehead]

Just be aware that Ping does not have this policy just to be pig headed. The metal becomes more brittle over time and more susceptible to breaking when bent. If some other shops have a technique for doing this that is better than what Ping is capable of I would like to hear how they do it.

[fore_life]

I thought ping wouldn't do it solely because they cannot replace them if they were to be damaged?

[OldGolfer87]

about 2 weeks ago a friend with a older BuCu wedge tried to bend his 61 degree to 59 ... the first tug on the bar was okay , the second .. SNAP .. it broke off right at the base of the hosel ... if you want yo use the club again do yourself a favor and don't try to bend it ,they snap like a brittle twig ..

[ALIF]

[quote name='chunkyhunky' timestamp='1345460386' post='5502070']
about 2 weeks ago a friend with a older BuCu wedge tried to bend his 61 degree to 59 ... the first tug on the bar was okay , the second .. SNAP .. it broke off right at the base of the hosel ... if you want yo use the club again do yourself a favor and don't try to bend it ,they snap like a brittle twig ..
[/quote]

Ouch! That was a $250 mistake!

[One_Putt_Blunder]

I would stopped trying to bend ping wedges when I did club repair, they were a pita and always felt like I would snap one. But of all the places to go I would say cool clubs or as forelife said azgolfworks

[Matt_Attack]

I was scared to get my eye 2's bent... had them for 13 years

I wouldn't bend the becu's just keep them forever and get the new anser forged irons...