Removing Graphics on Burner TP 2007

[Mongo26]

Any way to do this

Am looking for a household way to paint over the graphics or remove them completly. Dont know how it could be done but if anybody has any idea it would be greatly appreciated. Thanks.

-Tim

[icec0ld]

one of two things....

 

1) buy paint stripper and spray it onto the driver to remove the old paint / graphics and then repaint it

 

2) tape off the painting areas, scuff the current paint / graphics. then put a coat of primer and then repaint the driver.

[SteveL1]

Which graphics are you trying to remove? The white TP logo on the front of the head, the shaft graphics, the little TM logo on the crown, the web lines on top, the loft #, ?????

[Mongo26]

Which graphics are you trying to remove? The white TP logo on the front of the head, the shaft graphics, the little TM logo on the crown, the web lines on top, the loft #, ?????

 

The web design on the crown

[SteveL1]

I would think that there is a clear coat over the web design but maybe not. If not, you can color sand it off being very carefull to not got through the color coat to bare metal. Buff back to a shine with multiple stages of rubbing compound just like doing a car.

 

If there is a clear coat, you would need to sand off the clear then the web design and then re apply a clear. This would be VERY VERY difficult to make look good. Same problem happens on newer cars with a base coat/clear coat finish. Once the clear is sanded through and no matter how much you feather the edges, you will get "witness" marks after top coating again with clear. Even the best prfessional car painters have a hard time with this. Especially on metalic paints. It's really hard to get the same amount of sparkle when touching up a spot as the metalic flakes are suspended in the paint when sprayed and end up being applied somewhat evenly. When applied with a touch up brush, the metalic flakes tend to clump toegther and the touch up tends to look darker.

 

Not sure if this answers your question but it's a start. You may want to call TM and ask if they use a clear top coat or not.

 

Another option is to find a good custom painter in your area and have them repaint the whole thing. Guys that do mortorcycles and murals on low riders/show cars would be a good option as they are use to working in small areas.

 

I'm in the middle of refinishing a TM R7 425 at the moment and it's a major PITA to get the color right. TM does not sell touch up paint so I have been trying to mix my own and apply with an air brush.

[xdhammerbx]

new driver tim? lol

[Mongo26]

new driver tim? lol

 

I had the burner tp before the mizuno which i had before the callaway (god im a ho) and right now it has a 48'' accuflex assassin shaft in it and is in crap shape. So im thinking about refinishing it then putting a whiteboard in it and then try it. If it does not out perform the callaway i will just sell it

[xdhammerbx]

new driver tim? lol

 

I had the burner tp before the mizuno which i had before the callaway (god im a ho) and right now it has a 48'' accuflex assassin shaft in it and is in crap shape. So im thinking about refinishing it then putting a whiteboard in it and then try it. If it does not out perform the callaway i will just sell it

 

 

get an ozik and call it a day :russian_roulette:

[Mongo26]

new driver tim? lol

 

I had the burner tp before the mizuno which i had before the callaway (god im a ho) and right now it has a 48'' accuflex assassin shaft in it and is in crap shape. So im thinking about refinishing it then putting a whiteboard in it and then try it. If it does not out perform the callaway i will just sell it

 

 

get an ozik and call it a day :russian_roulette:

 

why ozik...from what ive hit they are nothing special

[Boba]

Am looking for a household way to paint over the graphics or remove them completly. Dont know how it could be done but if anybody has any idea it would be greatly appreciated. Thanks.

 

-Tim

 

Have you tried a shotgun?

[xdhammerbx]

new driver tim? lol

 

I had the burner tp before the mizuno which i had before the callaway (god im a ho) and right now it has a 48'' accuflex assassin shaft in it and is in crap shape. So im thinking about refinishing it then putting a whiteboard in it and then try it. If it does not out perform the callaway i will just sell it

 

 

get an ozik and call it a day :russian_roulette:

 

why ozik...from what ive hit they are nothing special

 

dispersion is tighter.. not much better than diamanas IMO but whatev

 

try the GD quattrotech md... pure money

[Mongo26]

new driver tim? lol

 

I had the burner tp before the mizuno which i had before the callaway (god im a ho) and right now it has a 48'' accuflex assassin shaft in it and is in crap shape. So im thinking about refinishing it then putting a whiteboard in it and then try it. If it does not out perform the callaway i will just sell it

 

 

get an ozik and call it a day :russian_roulette:

 

why ozik...from what ive hit they are nothing special

 

dispersion is tighter.. not much better than diamanas IMO but whatev

 

try the GD quattrotech md... pure money

 

I might try the GD...But if I get to bored with myself i might have to order an adams 9015D