LTD Shaft tip Screw specs

roxaldroxald ClubWRX Posts: 472 ClubWRX
Anyone know the size, length and thread size of the screw that sits in the LTD driver head to attach the shaft.

Mine fell out while trying a new shaft and I

couldn’t find it.

TheF8 or F7 screws are way to long and the head diameter is too large.

I have ordered a replacement thru Cobra but it will be a week to arrive,so I’m looking for something I can substitute in the interim.

Even a machine bolt with a hex head will suffice for now.

Rox
Cobra F9 Avalanche 9° with GD AD-iZ 7X<br />GBB 3-wood with Regio 70x<br />Rogue 5-wood with Aldila Green 70S<br />Srixon U65 23° with Nippon 120X<br />Cobra Forged Tec Black OL 5 & 6 and VL 7-PW $-Taper 125’s<br />Callaway Forged Black 54° and 58° PM Grind/ Nippon 115X Wedge<br />Bettinardi Stock 8<br />TP5

Comments

  • TheBIIgCatTheBIIgCat ClubWRX Posts: 1,447 ClubWRX
    Take the adapter and shaft if you need to and match it up, I had to do the same a while back..
    Driver- TC Epic 440 with Hzrdus T1100<br />3-Wood- 13 Degree Ping stretch with Ping Tour 75x<br />Hybrid- 915 with Graphite Design Tour AD DI 85<br />Irons- ( 4-PW ) JPX 900 Forged with 110s Steelfibers - Wedges- Sm6 Vokey 48 bent 2 degrees strong - sm6 vokey raw 56 bent to 55 , 58 Raw Low Bounce K grind ( 110 Steelfibers in all wedges same length shafts )<br />Putter- Scotty Cameron Laguna 1.5 Studio Torch Finish that I did...
  • roxaldroxald ClubWRX Posts: 472 ClubWRX
    edited Jun 14, 2018 #3
    Good idea-I may even have a Fairway tip to shop around with.

    Should be same size as the driver.

    Rox
    Post edited by Unknown User on
    Cobra F9 Avalanche 9° with GD AD-iZ 7X<br />GBB 3-wood with Regio 70x<br />Rogue 5-wood with Aldila Green 70S<br />Srixon U65 23° with Nippon 120X<br />Cobra Forged Tec Black OL 5 & 6 and VL 7-PW $-Taper 125’s<br />Callaway Forged Black 54° and 58° PM Grind/ Nippon 115X Wedge<br />Bettinardi Stock 8<br />TP5
  • roxaldroxald ClubWRX Posts: 472 ClubWRX
    Found an M5 machine bolt 1/2” long works but I had to grind the diameter of the bolt head down to a smaller circumference so it slides into the LTD head.

    Rox
    Cobra F9 Avalanche 9° with GD AD-iZ 7X<br />GBB 3-wood with Regio 70x<br />Rogue 5-wood with Aldila Green 70S<br />Srixon U65 23° with Nippon 120X<br />Cobra Forged Tec Black OL 5 & 6 and VL 7-PW $-Taper 125’s<br />Callaway Forged Black 54° and 58° PM Grind/ Nippon 115X Wedge<br />Bettinardi Stock 8<br />TP5
Sign In or Register to comment.