LH Long plumbers neck

[BigLeftyinAZ]

I'm trying to search for one. Having a hard time . Anyone aware of these are available?

[5hort5tuff]

Not easy to find used in LH.  You may find an old anser 5 on ebay. New, lots of custom makers do make them on request. 

[WiscoLefty]

PLD custom will make you an Anser 30 or Anser 5 but that’s obviously an expensive option. Embrace will weld a long neck on if you want to send something in. 

[MattM97]

Yeah old Ping Anser 5 Milled are the most "common" but not easy to find. 

 

Other options is custom putter or modified but some customs are a few buck more.

[BigLeftyinAZ]

2 hours ago, WiscoLefty said:

PLD custom will make you an Anser 30 or Anser 5 but that’s obviously an expensive option. Embrace will weld a long neck on if you want to send something in. 

What do you know of this Embrace 

Edited October 21, 2023 by BigLeftyinAZ

[WiscoLefty]

Unfortunately I don’t know much other then the fact that they do it. Looks like they’ll weld on a long plumbers neck for $185. So if you have a putter lying around that could be a more affordable option. 
 

[WiscoLefty]

I should add they can put it on any putter without an insert. They do awesome work. Check out their instagram. 

[MattM97]

30 minutes ago, WiscoLefty said:

Unfortunately I don’t know much other then the fact that they do it. Looks like they’ll weld on a long plumbers neck for $185. So if you have a putter lying around that could be a more affordable option. 
 

 

I believe you also have to pick a refinish option on top of that so 185 plus whatever finish you pick. 

[biglefthander]

I was looking earlier this year and the best/only option for anything remotely modern (not counting the super light various 5 series pings) is the 2011ish anser milled series anser 5

Edited October 22, 2023 by biglefthander

[SUITS]

Off the rack you have very few options. I too am a long neck searcher. I have an karsten TR Anser 5, ping also made a Anser 5 in the milled series. 
 

several custom makers will do it. Lajosi, goodwood will both do it. I believe it will be at least $600 for this as a starting point. 
 

there are a few other oddballs out there. KZG and Kronos made the

 but they are not super traditional looking. 
 

the 2015 Bettinardi BB1 has a longer than standard neck. I’ve been looking for one of those forever. 

Edited October 22, 2023 by SUITS

[MattM97]

2 hours ago, SUITS said:

Off the rack you have very few options. I too am a long neck searcher. I have an karsten TR Anser 5, ping also made a Anser 5 in the milled series. 
 

several custom makers will do it. Lajosi, goodwood will both do it. I believe it will be at least $600 for this as a starting point. 
 

there are a few other oddballs out there. KZG and Kronos made the

 but they are not super traditional looking. 
 

the 2015 Bettinardi BB1 has a longer than standard neck. I’ve been looking for one of those forever. 

 

The LN BB1 never came in LH just RH as it was a Club Champion collab. 

[Sean124]

17 hours ago, MattM97 said:

 

I believe you also have to pick a refinish option on top of that so 185 plus whatever finish you pick. 

A guy on here posted one a while back that they left unfinished, so it’s not necessarily required. 
 

It was a Squareback with a welded long neck, IIRC. 

 

Edited October 22, 2023 by Sean124

[SUITS]

2 hours ago, MattM97 said:

 

The LN BB1 never came in LH just RH as it was a Club Champion collab. 

I’m talking about the standard 2015 bb1. It wasn’t a true longneck, it was just longer than most off the rack options. 
 

Edited October 22, 2023 by SUITS

[MattM97]

1 hour ago, SUITS said:

I’m talking about the standard 2015 bb1. It wasn’t a true longneck, it was just longer than most off the rack options. 
 

 

Still looks to be 45° toe hang. 

 

Neck is further back or blade is longer heel to toe. 

 

https://bettinardi.com/collections/putter-archive/products/bb1-1 

[BudPat]

On 10/21/2023 at 3:43 PM, BigLeftyinAZ said:

What do you know of this Embrace 

I sent my Square Back to Liam @ Embrace and he did a great job on installing a long plumbers neck.  Communicated well throughout and would work with them again if I get the itch to custy up another one.

[minew1545]

On 10/21/2023 at 10:55 AM, BigLeftyinAZ said:

I'm trying to search for one. Having a hard time . Anyone aware of these are available?

https://www.ebay.ca/itm/394853938945?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ktHqu1UVQHm&sssrc=4429486&ssuid=Y9Ax68wFSNa&var=&widget_ver=artemis&media=COPY