Yonex Ezone 380 w/ Attas Elements MK SICK!!!!

[whiteretro]

I have the Yonex 380 10 degree head installed in a floed/spined Nunchuk - length 44.75 inches

I consistently hit 255-265 with amazing accuracy

Tested the Yonex 380/Nunchuk against numerous other combos last year - when considering distance and accuracy - easily number 1

Matt built the set-up - workmanship of the highest level

Will be testing the Yonex/Nunchuk against a used Crazy CRZ 460 9 degree/Crazy TJ Black 7.7 - 45.25 inches D4 over the next few weeks

I also have Yonex 15 degree 3 wood/Nunchuk - 42.5 inches - clearly superior for distance +accuracy compared to other 3 woods

The key to maximizing distance and accuracy with the 380 head/15 degree3 wood head is to hit the sweet spot - the Nunchuk does this for me

[hornyjuan]

Very beautiful heads. Not too much is talked about the Yonex. I've heard the Ryoma's are super accurate but at $500 bucks the Yonex seems like a no brainer.

[Yohanan]

[quote name='Swoosh-Thud' timestamp='1366908594' post='6916083']
I have a 9* with the Elements MK 6S shaft- fantastic driver. It is the only driver that was able to kick my 2 i15s out of the bag. I'm tempted to get another and put in an SPX VTS Black in it.
[/quote]

Biggest demo day in Nor Cal tomorrow at Haggin Oaks. Its big like 21K per day. Called and asked if the Yonex boys were setting up and they said yes. So I will be hitting it tomorrow with stock shaft.

What do you like or want to see with SPX VTS Black over the Element?

Next step will be to schedule a time with a UST fitter and he sells Yonex after the demo to make sure I get the correct shaft.

Cheers

[Yohanan]

[quote name='whiteretro' timestamp='1366914107' post='6916651']
I have the Yonex 380 10 degree head installed in a floed/spined Nunchuk - length 44.75 inches

I consistently hit 255-265 with amazing accuracy

Tested the Yonex 380/Nunchuk against numerous other combos last year - when considering distance and accuracy - easily number 1

Matt built the set-up - workmanship of the highest level

Will be testing the Yonex/Nunchuk against a used Crazy CRZ 460 9 degree/Crazy TJ Black 7.7 - 45.25 inches D4 over the next few weeks

I also have Yonex 15 degree 3 wood/Nunchuk - 42.5 inches - clearly superior for distance +accuracy compared to other 3 woods

The key to maximizing distance and accuracy with the 380 head/15 degree3 wood head is to hit the sweet spot - the Nunchuk does this for me
[/quote]

Oh I will be hitting the 3 wood as well.
I have read nothing but good things about Matt.
There is a "master" UST fitter here in the Sacramento area. I have to see him and he needs to see me. I also have a 360 cc driver 9 * with an older (10 years ago) white blue yellow UST made for shaft with ProForce Tip. I have several PF.V2 and a Avix Red sitting here. I am especially fond of Fubuki A.

The quest I am on is replacing this club from a bankrupt company that never made it to production. Just pre production. Next Technologies magnetix is the company and techology. Again circa 2002? Maybe you saw the GC informercial. $500 a pop then? Owner took several thousand club orders and left for Mexico. NOT COOL. Friend of mine got 3 in the aftermath.

I wore the face pop off it 5 years ago. SO i continue the search for the grail replacement. 270 down middle or a slight draw or slight fade.

Could just square that smaller head?

Cheers

[Yohanan]

The 2011 380 is an interesting head. Didnt care for the stock shafts.
It is a small sweet spot and felt exceptional when flushed.

Going to go with the Cally RZFX 8.5 with Trinity S.
Misses went as far with consistent ball flight.
Got love that.

Cheers

[AUDuffer]

What about something from KZG like the VC-420? Smaller head and workable.

[tbowles411]

[quote name='AUDuffer' timestamp='1367611232' post='6965698']
What about something from KZG like the VC-420? Smaller head and workable.
[/quote]
And a little more forgiving than the 380cc head.

[Yohanan]

[quote name='tbowles411' timestamp='1367637511' post='6967994']
[quote name='AUDuffer' timestamp='1367611232' post='6965698']
What about something from KZG like the VC-420? Smaller head and workable.
[/quote]
And a little more forgiving than the 380cc head.
[/quote]

Ordered the t.388 should be here soon. Its states side as of last night.
XV is next once i figure out which loft and shaft.

Cheers