True Temper's new "AMT" Dynamic Gold iron shafts

[BirdieBob]

[quote name='Luke7' timestamp='1450667589' post='12745610']
Anyone received a set from Titleist with the Tour Issues?
[/quote]


Yes... 3-7 AMT TI x100; Waiting on a 8,9,P with AMT TI x100 shafts.
DDG said the shafts are on backorder; shipping 12/18!

Due to arrive FedEx Wednesday

[Luke7]

[quote name='BirdieBob' timestamp='1450711965' post='12746906'][quote name='Luke7' timestamp='1450667589' post='12745610']
Anyone received a set from Titleist with the Tour Issues?
[/quote]


Yes. Waiting on a 8,9,P with AMT TI x100 shafts.
DDG said the shafts are on backorder; shipping 12/18![/quote]

Well that will hopefully work out, I'm placing my order at the beginning of the year.

[KK524]

I had my 714mb ap2 combo reshafted with TI AMT x100.
Nothing but good things to say with the 3 rounds i have had with them.

[Breezy-3-]

[quote name='KK524' timestamp='1450727663' post='12748150']
I had my 714mb ap2 combo reshafted with TI AMT x100.
Nothing but good things to say with the 3 rounds i have had with them.
[/quote] Where did you find the shafts?

[KK524]

I went throught Titleist Canada as im in Vancouver.
just sent them back it took 3/4 weeks to get back tho because the shafts had to be ordered from California

[progolferv1]

[quote name='progolferv1' timestamp='1450705191' post='12746494']
[quote name='Luke7' timestamp='1450667589' post='12745610']
Anyone received a set from Titleist with the Tour Issues?
[/quote]

Ordered mine Dec 1 and nothing yet. Are they backordered?
[/quote]


Mine arrived today

[jjpb5]

I got to hit them today in some tour issue PSI's. It was 35 degrees with some flurries, but I had to try a few of them out. I don't have a launch monitor and these seem to go higher and couldn't tell about the distances since the weather and wind were terrible. They felt a touch softer than my other X100's. I'm impressed and keeping them. [attachment=3075688:ImageUploadedByGolfWRX Mobile1450838238.683674.jpg][attachment=3075690:ImageUploadedByGolfWRX Mobile1450838270.838941.jpg][attachment=3075692:ImageUploadedByGolfWRX Mobile1450838290.009168.jpg][attachment=3075694:ImageUploadedByGolfWRX Mobile1450838309.426983.jpg]

[ladahl]

Looks great!

My TMB set with AMT TI X100, are still not shipped - ordered 11/24

[BirdieBob]

[quote name='ladahl' timestamp='1450838432' post='12754206']
Looks great!

My TMB set with AMT TI X100, are still not shipped - ordered 11/24
[/quote]


The TI AMT was on backorder by Titleist but are now shipping. Mine shipped 12/18 and will be here tomorrow.
Original date of shipping was 11/24, so quite a delay.

[tyro]

Well, I just ordered a set of T-MB's with AMT shafts week before last, so I could be in for a wait. Ugh!

[ladahl]

[quote name='BirdieBob' timestamp='1450840348' post='12754346']
[quote name='ladahl' timestamp='1450838432' post='12754206']
Looks great!

My TMB set with AMT TI X100, are still not shipped - ordered 11/24
[/quote]


The TI AMT was on backorder by Titleist but are now shipping. Mine shipped 12/18 and will be here tomorrow.
Original date of shipping was 11/24, so quite a delay.
[/quote]

Titleist told me mine were delayed due to TMB heads not passing inspection... Original ship date for me was supposed to be 11/30. But keeping on track- these shafts in a full set sound absolutely fantastic !

[ladahl]

[quote name='tyro' timestamp='1450842797' post='12754484']
Well, I just ordered a set of T-MB's with AMT shafts week before last, so I could be in for a wait. Ugh!
[/quote]

Did you order with TI, as well?

[BirdieBob]

[quote name='ladahl' timestamp='1450871824' post='12755036']
[quote name='BirdieBob' timestamp='1450840348' post='12754346']
[quote name='ladahl' timestamp='1450838432' post='12754206']
Looks great!

My TMB set with AMT TI X100, are still not shipped - ordered 11/24
[/quote]


The TI AMT was on backorder by Titleist but are now shipping. Mine shipped 12/18 and will be here tomorrow.
Original date of shipping was 11/24, so quite a delay.
[/quote]

Titleist told me mine were delayed due to TMB heads not passing inspection... Original ship date for me was supposed to be 11/30. But keeping on track- these shafts in a full set sound absolutely fantastic !
[/quote]


I don't have a direct line to Titleist, but DDG checked on the status of my order with Titleist (with MOTO and not a CS rep.) and was told the TI AMT was on backorder. They are now available and shipping.

Mine (8,9,P) are out for delivery today!

[BirdieBob]

[quote name='tyro' timestamp='1450842797' post='12754484']
Well, I just ordered a set of T-MB's with AMT shafts week before last, so I could be in for a wait. Ugh!
[/quote]


No worry, the TI AMT is now available after being on backorder.
Shipping...mine are here!!

[tyro]

[quote name='ladahl' timestamp='1450871906' post='12755038'][quote name='tyro' timestamp='1450842797' post='12754484']
Well, I just ordered a set of T-MB's with AMT shafts week before last, so I could be in for a wait. Ugh!
[/quote]

Did you order with TI, as well?[/quote]

No, I went stock S300 since I was going to soft step the S400 TI's anyway. I figure they must keep tighter weight tolerances on the AMT's.

I may go with Modus 125's anyway, so I didn't want to spend the upgrade money when I may get them rebuilt.

Hey, it's WRX, right!?!?!

[BirdieBob]

[quote name='BirdieBob' timestamp='1449631956' post='12697520']
The 9 and pw are both the same weight in the amt.
Therefore, softstepping 1x will put the 8 iron shaft in both.

[url="http://www.golfwrx.com/forums/topic/1137127-true-tempers-new-amt-dynamic-gold-iron-shafts/page__st__720#entry12627808"]http://www.golfwrx.c...0#entry12627808[/url]
[/quote]


Just to follow-up on this. Titleist does soft-step the 9i and P the same with 8 iron shaft!
Some did not believe this would be the case, so here are the pictures for proof.

These are 3 - P, Titleist T-MB irons with DG TI AMT x100 shafts SS1x. Last iron at the right/top is a Vokey GW(50*).

The gap wedge has a DG TI oynx x100 shaft straight in.
Obvious difference between the 9,P and GW, AND the others are offset equally.
The rib is on the right side of the tape on each iron....9, P are the same.


[attachment=3076654:amt ss1 002.JPG]

[attachment=3076656:amt ss1 003.JPG]

[ladahl]

I'd find that rather odd, but you never know, I guess.

I had mine SS too. IIl, take off the grip off my PW and look at the silk screened label to be certain.

[BirdieBob]

Updated AMT graphic



[attachment=3077144:DG AMT.jpg]

[tyro]

[quote name='BirdieBob' timestamp='1450983393' post='12759698']
[quote name='BirdieBob' timestamp='1449631956' post='12697520']
The 9 and pw are both the same weight in the amt.
Therefore, softstepping 1x will put the 8 iron shaft in both.

[url="http://www.golfwrx.com/forums/topic/1137127-true-tempers-new-amt-dynamic-gold-iron-shafts/page__st__720#entry12627808"]http://www.golfwrx.c...0#entry12627808[/url]
[/quote]


Just to follow-up on this. Titleist does soft-step the 9i and P the same with 8 iron shaft!
Some did not believe this would be the case, so here are the pictures for proof.

These are 3 - P, Titleist T-MB irons with DG TI AMT x100 shafts SS1x. Last iron at the right/top is a Vokey GW(50*).

The gap wedge has a DG TI oynx x100 shaft straight in.
Obvious difference between the 9,P and GW, AND the others are offset equally.
The rib is on the right side of the tape on each iron....9, P are the same.


[attachment=3076654:amt ss1 002.JPG]

[attachment=3076656:amt ss1 003.JPG]
[/quote]

That's great info to know. I probably would have soft stepped some S400 TI if I had known that, but too late now. Apparently once the order is placed with Titleist, its too late to make modifications.

[campion]

A little bump to this thread. Any word on official release date and price?

[MJisGOAT]

A little bump to this thread. Any word on official release date and price?

 

My fitter said Tour Issue available now and,

 

"They cost $50 per club installed with rubber grips or $55 with cord."

[pdaero]

Have TI AMT X100 softstepped coming in a set of 716CBs. Can't wait to get them in!

[Flagrant]

Anyone received a set from Titleist with the Tour Issues?

 

Ordered mine Dec 1 and nothing yet. Are they backordered?

Friend of mine order a set in ap2's on dec 7th he was told end of February. Back ordered.

[pdaero]

DD's told me an expected ship date of 1/11 (Monday), and I ordered them on 12/31.

[Chilli9880]

The 9 and pw are both the same weight in the amt.

Therefore, softstepping 1x will put the 8 iron shaft in both.

 

http://www.golfwrx.c...0#entry12627808

 

 

Just to follow-up on this. Titleist does soft-step the 9i and P the same with 8 iron shaft!

Some did not believe this would be the case, so here are the pictures for proof.

 

These are 3 - P, Titleist T-MB irons with DG TI AMT x100 shafts SS1x. Last iron at the right/top is a Vokey GW(50*).

 

The gap wedge has a DG TI oynx x100 shaft straight in.

Obvious difference between the 9,P and GW, AND the others are offset equally.

The rib is on the right side of the tape on each iron....9, P are the same.

 

 

 

 

 

 

BirdieBob, I specifically ordered my shafts from Will Peoples with the intent to soft-step them. I specifically ordered 4 through 9 with the intent to put into 5 thru PW. These can be thrown in and cut to length with no worries, right?

[BirdieBob]

The 9 and pw are both the same weight in the amt.

Therefore, softstepping 1x will put the 8 iron shaft in both.

 

http://www.golfwrx.c...0#entry12627808

 

 

Just to follow-up on this. Titleist does soft-step the 9i and P the same with 8 iron shaft!

Some did not believe this would be the case, so here are the pictures for proof.

 

These are 3 - P, Titleist T-MB irons with DG TI AMT x100 shafts SS1x. Last iron at the right/top is a Vokey GW(50*).

 

The gap wedge has a DG TI oynx x100 shaft straight in.

Obvious difference between the 9,P and GW, AND the others are offset equally.

The rib is on the right side of the tape on each iron....9, P are the same.

 

 

 

 

 

 

BirdieBob, I specifically ordered my shafts from Will Peoples with the intent to soft-step them. I specifically ordered 4 through 9 with the intent to put into 5 thru PW. These can be thrown in and cut to length with no worries, right?

 

 

The 9 and PW shafts are the same. See this graphic

 

 

 

So, they may put the 8i shaft in the 9 & PW or just in the 9 and put a 9/PW shaft in the PW. Titleist did the 8i into both the 9 & PW. Might want to discuss it with them beforehand and make sure they put a wedge shaft in the PW.

[ladahl]

Bob- I wasn't a believer - but looking at my set, looks like the same step pattern in my TMB in the 9,P AND W!

 

Kind of crazy IMO, I'll hold judgement until I put a grip, but it looks like they put an 8 iron shaft in all 3 of my scoring clubs 9-W

 

I have never had a company do it this way in all my sets I've ever ordered SS . I've irdered from Callaway, Mizuno and Ping - first Titleist set of irons I've owned

[station2station]

So if you hard stepped your clubs they would put the 9i shaft in the PW, and the PW shaft in the 9 iron (normal as with every set) then they would ALSO put the 9 iron shaft in the 8iron (hard stepping)

 

BUT you ordered soft stepped - so they should be putting the 7 iron shaft in your 8, the 8 iron shaft in your 9, and the PW shaft remains the same (a 9 iron shaft). So in reality there should be 3 different step patterns in your 8, 9, PW in a soft-stepped set.

 

 

Whenever I built my own soft stepped sets, thats the outcome.

[BirdieBob]

So if you hard stepped your clubs they would put the 9i shaft in the PW, and the PW shaft in the 9 iron (normal as with every set) then they would ALSO put the 9 iron shaft in the 8iron (hard stepping)

 

BUT you ordered soft stepped - so they should be putting the 7 iron shaft in your 8, the 8 iron shaft in your 9, and the PW shaft remains the same (a 9 iron shaft). So in reality there should be 3 different step patterns in your 8, 9, PW in a soft-stepped set.

 

 

Whenever I built my own soft stepped sets, thats the outcome.

 

 

Since the 9 & PW shafts are the same, the step above is the 8 iron shaft and that is what goes in the 9/PW when softstepped.

Hard stepped...the 9/PW wedge (step below) shaft goes into the 8 iron.

[ladahl]

So if you hard stepped your clubs they would put the 9i shaft in the PW, and the PW shaft in the 9 iron (normal as with every set) then they would ALSO put the 9 iron shaft in the 8iron (hard stepping)

 

BUT you ordered soft stepped - so they should be putting the 7 iron shaft in your 8, the 8 iron shaft in your 9, and the PW shaft remains the same (a 9 iron shaft). So in reality there should be 3 different step patterns in your 8, 9, PW in a soft-stepped set.

 

 

Whenever I built my own soft stepped sets, thats the outcome.

 

That's how EVERY OTHER set I've ordered has arrived, as well.

 

8 in 9, 9/W in PW, 9/W in gap