MACHINE Putters Picture Thread

[choeppner]

Hello,

On the Face Milling we offer the Vertically Milled Groove (VMG) which is our Standard face milling and the Thread Milled Groove (TMG)

On the TMG Face milling, depending on the pitch of the grooves, we can change how soft or hard the putter feels.

We can also do Fly Milled Face Milling, but to my knowledge, we have only done 2 like this.

Thanks

-Chris

[bjackson]

M10 in Hot Salts Gun Blue finish - yum!

[choeppner]

Thanks Ben! Appreciate the comment

-Chris

[DB MACHINE]

[quote name='bjackson' timestamp='1391558056' post='8599339']
M10 in Hot Salts Gun Blue finish - yum!
[/quote]

Thanks Ben! I'll email you shortly.

-Dave

[choeppner]

Hey Guys,

 

I hope everyone is having a great day! I wanted to share with you some pictures of a Custom MACHINE M2A Converter that Dave just finished for a very well known course.

 

This MACHINE features a Custom 303 Stainless M2A Converter Head with a 303 Stainless Fat Back Flange that has been trimmed down to the depth of a Beefy Back Flange and a 303 Stainless Plumber Neck.

 

The Medallion is a Custom Engraved Black Anodized Alloy Medallion.

 

We look forward to hearing your thoughts!

 

Thanks in advance

 

-Chris

 

 

[DNice26]

Do you guys have any major dealers in the NY/NJ area? Thank you.

[choeppner]

[quote name='DNice26' timestamp='1391562919' post='8599827']
Do you guys have any major dealers in the NY/NJ area? Thank you.
[/quote]

Hello,

Our New York Fitter is Novo Golf located in Tappan, New York. Their info is as follows:

[b]Novo Golf[/b]
[i]William Cho – Owner[/i]
116 Route 303
Tappan NY 10983
Tel: 845.680.7000
[url="http://www.novogolf.com"]http://www.novogolf.com[/url]

Thanks in advance

-Chris

[DNice26]

Ok, I know Bill well. He doesn't have many models to look at and try from what I recall. I'll double check with him.....thank you!

[choeppner]

Hello,

Not a problem at all! If he doesn't have it in stock, I know he can get it I know we just shipped him a big new batch of putters

Thanks

-Chris

[DNice26]

Good to know...thank you!

[choeppner]

Not a problem at all. Glad we could help.

Thanks

-Chris

[UnderPar18]

That M2A converter is awesome looking. I would love to bag a M2A blade back... I've been drooling over one all day!

[choeppner]

Thanks! I can definitely help you build one. Lol

Thanks

Chris

[ramylson]

Hey Guys,

 

I hope everyone is having a great day! I wanted to share some pictures with you of a Custom MACHINE that Dave just finished for a Customer.

 

This MACHINE features a Custom 303 Stainless M10 Adjuster with a 303 Stainless Half Offset Long Neck and Custom Torch Finish.

 

This MACHINE also features Custom Pill Cuts on the Sole and a Retro Pill Cut Cavity.

 

The Face Milling on this MACHINE is a Custom Fly Milled Face Milling.

 

I look forward to hearing your thoughts.

 

Thanks in advance

 

-Chris

 

 

Now that is darned near perfect. Beautiful piece right there.. (*adds to wish list)

[choeppner]

Thanks! Appreciate the comment

Chris

[choeppner]

Hey Guys,

 

I hope everyone is having a great week! I wanted to share with you a Custom MACHINE Putter that Dave built.

 

This MACHINE features a Custom Damascus Steel M10 Adjuster Head with a Custom Damascus Steel Weld NEck Hand Bent Hosel.

 

The finish on this MACHINE is our Hot Salts Gun Metal Blue Finish.

 

We look forward to hearing your thoughts!

 

Thanks in advance

 

-Chris

 

[tbowles411]

HEY BRO! I sent a FB message!

[Fish-N-Chips]

I have my first Machine coming my way!!

Haven't been this excited over a putter in forever!

[choeppner]

[quote name='tbowles411' timestamp='1391720623' post='8611393']
HEY BRO! I sent a FB message!
[/quote]

Thanks Tommy! That's weird that I didn't get a notification? I'll go check right now and answer

Thanks

-Chris

[choeppner]

[quote name='Fish-N-Chips' timestamp='1391723834' post='8611679']
I have my first Machine coming my way!!

Haven't been this excited over a putter in forever!
[/quote]
Congrats! What did you end up getting

If you have any questions, please don't hesitate to ask

Thanks

-Chris

[choeppner]

Hey Guys,

 

I hope everyone is having a great week! I wanted to share with you a MACHINE Custom Putter that Dave just finished for a Customer.

 

This MACHINE features a Custom 303 Stainless M4 Meritage with a 303 Stainless Deep Bite Bongo Back Flange and a 303 Stainless Modular Center Shaft Hosel. The Flange has been finished in a Blue Torch Finish.

 

The Medallion on this MACHINE is a Custom Blue Anodized Alloy Logo Medallion.

 

This MACHINE also features a Custom Blue Anodized Milled Grip.

 

We look forward to hearing your thoughts!

 

Thanks in advance

 

-Chris

 

[choeppner]

Hey Guys,

 

I hope everyone had a great week! I wanted to share with you a Custom MACHINE Putter that Dave just finished for a Customer.

 

This MACHINE features a Custom Billet Copper M2A Converter Head with a Billet Copper Blade Back Flange and a Copper Modular Center Shaft Hosel. The Head, Hosel and Flange have all been finished in Dave's Aged and Pre-Worn Antique Patina Finish.

 

This MACHINE also features a Custom Arch Balanced Heel Closer Weight.

 

The Face Milling on this MACHINE is our Thread Milled Groove Face Milling.

 

We look forward to hearing your thoughts!

 

Thanks in advance

 

-Chris

 

[DB MACHINE]

Hey Everyone,

The new Megalodon XL prototypes just came off the mill, and we're finalizing all the details for the first limited edition production run starting next week.

The first photo shows the original Megalodon XXL on the left fit here with a Modular Center Shaft neck, and the new Megalodon XL on the right fit with a fully skeletonized half offset long plumber neck, which is shown in different views in the rest of the photos.

Both the XXL and XL are excellent in Counter Balanced setups (standard length and longer lengths).

When paired with a M4 Meritage head and double bend shaft over stud, the XL weighs in at 355 grams prior to the addition of any adjustable weights.

As shown with the fully skeletonized half offset long plumber neck and Black Delrin Spacer it is 380 grams, a great starting with with a counter balanced shaft and grip. You can add up to 40 grams with these, in 1, 3, 7 or 10 gram increments in four weight ports.

The ease of alignment, accuracy, feel and forgiveness are really awesome with these. So much so that XL Proto #1 is now in my bag!

Thanks for checking them out.

All the best,

-Dave

[attachment=2060133:MP_M4_Megalodon_XXL_&_XL_2x_ch.jpg]

[attachment=2060135:MP_M4_Megalodon_XL_Proto1_HOLPN_FSk_1c.jpg]

[attachment=2060137:MP_M4_Megalodon_XL_Proto1_HOLPN_FSk_1ch.jpg]

[attachment=2060143:MP_M4_Megalodon_XL_Proto1_HOLPN_FSk_1ad.jpg]

[attachment=2060139:MP_M4_Megalodon_XL_Proto1_HOLPN_FSk_1f.jpg]

[attachment=2060141:MP_M4_Megalodon_XL_Proto1_HOLPN_FSk_1s.jpg]

[choeppner]

Hey Guys,

 

I hope everyone is having a great weekend! I wanted to share with you a Custom MACHINE that Dave just finished for a Customer.

 

This MACHINE features a Custom 1018 Carbon Prize Putter Head with a 1018 Carbon Plumber Neck Hosel.

 

The Head and Hosel have both been finished in a Satin Nickel Plate FInish with an Antique Hot Sauce Experimental finish.

 

This MACHINE also features a Custom Milled Billet Copper weight port sleeve.

 

We look forward to hearing your thoughts!

 

Thanks in advance

 

-Chris

 

[jay-lo89]

That Megalodon XL with the Long Skeletonized neck is amazing.....I must have one!! Sent you an email Chris.

[choeppner]

Thanks Jay! Appreciate the comment

Replying to your e-mail right now

Thanks

-Chris

[choeppner]

Hey Guys,

 

I hope everyone is having a great day! I wanted to share with you a Custom MACHINE that Dave just finished building for a customer.

 

This MACHINE features a Custom 303 Stainless M4 Meritage Head with a Copper Plated 1018 Carbon Double Fat Back Nibble Back Flange and a Black Delrin Spacer.

 

The Hosel is a Shaft over Stub hosel for a Double Bend Shaft.

 

This MACHINE weighs 360 Grams as shown, and we can increase the weight another 40 grams by using tungsten weights.

 

We look forward to hearing your thoughts!

 

Thanks in advance

 

-Chris

 

[choeppner]

Hey Guys,

 

I hope everyone is having a great week! I wanted to share with you a Custom MACHINE that Dave just finished for a Customer.

 

This MACHINE features a Custom 1018 Carbon M8 Converter Head with a 1018 Carbon #02 C Flange and a 1018 Carbon Laid Back Gooseneck Hosel. The Head, Hosel and Flange have all been finished in our Hot Salts Gun Metal Blue Finish.

 

The Medallion on this MACHINE is a Custom Engraved Aluminum Bronze Medallion.

 

We look forward to hearing your thoughts!

 

Thanks in advance

 

-Chris

 

[Brando5105]

That m8 is ridiculous.. The more I see that headshape the more I like it

[choeppner]

Thanks Brandon. Appreciate the comment

Thanks

Chris