TaylorMade V Steel

[scottyallanb]

I have been hitting a 15* vsteel with T/S graphite shaft and it hits bombs. I have never been happy with my 3 wood and now have no problem hitting it when I need to. I dont hit it often but when I do need it for that long par 5 it has been money. I like the fact that it doesnt have a really deep face. Great club off the deck and off the tee. You can pick these up really cheep now so dont hesitate to try one. I would put it up against any high dollar 3 wood out there.

 

 

Scotty B

[propredicr]

I agree. T/S 13* is as long as my driver, too. My instructor was laughing at me when I told him I hit my 3 wood farther than my driver...until he saw me spank one with the vsteel. I got rid of the 5 wood because I love my Rescue Mid 2. Been looking for a R7 ST fairway wood to replace the vsteel, but, so far no luck.

[Henrik]

I´m thinking of pulling a NV75 S from my G5 3 wood and put in a V-Steel 3 wood. Do these clubs have the same insertion depth??? I think the G5 has 1,5"

 

I love the V-steel but the stock TM shaft is crap!!! And I don´t like the G5 head but like the shaft.

[bbfifas]

Anyone trying to sell a V steel 4 wood? Will even by head-only. Let me know

[BEND OF THE RIVER GC]

I just picked up a nice 15* V Steel fairway wood for around $50 at Golf Galaxy. I have an Aldila DVS 65-S shaft going into it. I'll update as to how it plays in the spring....

 

 

I am hoping this thing will be a rocket!

[Parry]

I have the 15 degree 3 wood with the stock mas-2 stiff and the 19 degree 5 wood with an x-stiff ys-9.1.

 

the 3 wood can be hit high or low 220 yards and the 5 wood is great for hitting it up and landing soft around 200 easily. If you don't like the hybrids, these are pretty good out of the rough and have a nicer setup at address.The feel on a good shot really seals the deal for me.

These clubs hit long and easily with good results.... I absolutely toed my 3 wood yesterday and still hit it 200 and only 10 yards right...If you are looking for reasonably priced used fairway woods on ebay, try these out and you won't be disappionted... I bet there are golfers like me that still hit these so good, they are'nt thinking of upgrading to newer tm's.

[Justmuckit]

Finally found a 15* to go with my 18*

 

Just picked up a 15* with a Fujikura Vista Pro 80 shaft.

 

$40.

[ghromas]

i love the vsteels and have 2 supposedly identical heads, but each plays a bit different - i think one plays just a hair closed. i heard from a custom guy that taylormade had at least 15 different masters making the heads. quality control is always an issue for the big manufacturers- even for special orders (if not more so).

[Drayer10]

Found a near perfect LH 3 wood V Steel on EBay, re-shafted with an Aldila NVS 75 S, what a club. Sets up very nice, easy to align, highly recommended.

:good:

[jp11]

Use the V-steel, stiff steel stock shaft 15 degrees. and a Burner graphite stiff 15. V-steel is a bit lower trajectory but runs a little and burner is higher. Burner gets killed in the wind (10+ mph) but not the v-steel.

The difference is when I miss a fairway or green the burner stays put, the v-steel keeps going. Both great clubs.

[import49erz]

I have a tour issued v steel as my 5 wood and a burner 3 wood. Both are great clubs and I use them depending on distance, obviously, and situation. very nice combo to have.

[lee36328]

I heard about Vsteel from a friend who was raving about it. Me being a first-year golfer, it didn't register at first, but I got a 5W anyway to try it out.

As my swing started to stabilize, of all the clubs in my bag, I discovered the VSteel 5W is the most natural to hit. The TM Burner 3W in comparison was always tricky, so I sold it off and I set my sights on a VSteel 3W, only to discover that they are no longer in production.

After much searching around, with luck and the help my friend Duncan from Absolut, amazingly I found a rare supply of brand new 3W and 5W. I bought two of each. Took out the 3W for a round yesterday, and hit some nice, long shots with it.

Am a happy camper now.

[daheels]

I am looking for a good [b]low[/b] launching shaft for a 15* vsteel. Its for a buddy who has a [b]faster tempo[/b]. Any suggestions?

[wmblake2000]

This is the best designed head for my sense of a fairway wood I ever encountered. It's just the right amount of low profile and sets up just right for my eye. After a long search for a fairway wood I really trusted and like, I found this. And for $40. That's sweet.

[JOCKO]

There is a ebay seller on the bay at this time who is offering a set 3-5-7 v-steels.
discountgolfsales

[ceasterb]

[quote name='yUmaRouS' timestamp='1122505723' post='20298']
I've used a 13* for about a yr and a half now and goes pure. Mid to low trajectory and I think the Speeder 757 or and Diamana 83 are the way to go.
[/quote]I have a TM V Steel with a Diamana BB 83 and it's a wonderful feeling club. I keep trying to get it out of my bag, but just haven't found anything I hit better.

[bignate449]

Very good club, just the technology has passed it by. Good option for a bargain hunter who doesnt want to sacrifice much in the way of performance. My dad swears by his, and its about 5 years old.

[cinnepa]

just picked up another 3 and 5 wood after selling them 2 years ago............much money later and many tested, went back to these.

[D_Rob_PNW]

I

[Carp]

Found a 4 wood with a speeder shaft super cheap recently. Soooo nice! I can confidently say I will be buying more V Steels in the future.

I'd like a house full of em!

[PuttForDough100]

Still using this 5 wood occasionally! Great club