Shafts and More Shafts....WB, Matrix PX, and Fuji

[TMBob]

Some R9 Driver and Rescue Shafts...New Lower Prices. Some $50 or

R9 Shafts first,

Driver Shafts......all .335 tips
Matrix F6M2 Stiff think 253 cpm as it is gripped. 44.25" to the end of the sleeve. 2009 .350 shimmed sleeve with a 1/2" butt extension. $165 with sleeve, or $135 without.
Matrix Altus 2007 Proto, again I think 254 cpm as it is gripped. 43.75 to the end of a 2009 .350 sleeve....$180 with sleeve, SOLD
Project X Tour Hy HD2 92 grams 6.0 40.75 to the tip of a Rescue sleeve.........$125 with sleeve, $95 without....SOLD
Altus Hy 280 cpm strong 40" to the tip of the Rescue sleeve.......$115 with sleeve, $85 without.
Altus Hy Reg marked on shaft, 40 3/4" to Rescue sleeve......$100 with sleeve, $75 without
R9 TP Voodoo SVS8 Rescue pull 39" 2" prep. .370 tip...$25


Other Shafts....all .335 tips unless noted
Diamana WB 73 5xct Stiff tipped 3/4" 43.75" 1.75 prep..............SOLD
Diamana RB 73 5xct XStiff 41.50" 2" prep............$65
Matrix XCon 7 Xstiff 41" 1.5" prep.......................$65
Matrix XCon 5 Xstiff 2008 TM Graphics 43.50" 2" prep....$50
Matrix F7M2 Xstiff 2007 TM Burner Graphics Tour Only 41.25" 1.75" prep.......$65
Accra SC 75 M4 42.50" 1.75" prep.......$50
Accra SC 65 M4 42" 2" prep..............$50
Fujikura Zcom TW74 Stiff 41.75" 1.75" prep.......$50
Harrison Mugen No Limit 42.50" 1.5" prep.......no flex markings.........$30
UST Tour Graphite Prototype 42" 1.75" prep.......Proto V2........SOLD
Fujikura 904 HB Stiff.....355 tip pull out of a 2007 TP Rescue...38.5" 2" prep with small mark above prep.....$65

Prices are Shipped to CONUS via USPS Pri Mail.....Add $3 for insurance to any order over $100. Take $5 off for any order of 2 or more shafts, or $10 off of any order of 4 or more shafts.

If you need a dead weight in grams on any shaft, please ask.

[Puppetmaster]

If only the Xcon7 or F7M2 were 43.5"... bump for some nice stuff.

[kell]

What is the tipping on the f6m2?What length without the r9 tip?

[vix02]

PM Sent

[TMBob]

[quote name='kell' date='28 April 2010 - 11:21 AM' timestamp='1272478888' post='2406425']
What is the tipping on the f6m2?What length without the r9 tip?
[/quote]

Untipped......need a measurement to check this let me know and I can recheck it.

The sleeve adds 3/8's" to it.....you saw that I extended it 1/2" Pretty sure it was just short of 43.50" without the sleeve and extension as the Altus was the same raw length.

[TMBob]

Some shafts have been sold, thanks

[TMBob]

New Lower Pricing......many $50 shafts!

[TheRookie11]

Bump for a great seller with great products and awesome service.

[TMBob]

Whiteboard Sold, thanks Rook

[Aragolf]

How long do you think that redboard would play installed in a driver?

[TMBob]

[quote name='Aragolf' date='08 May 2010 - 02:51 PM' timestamp='1273355492' post='2429246']
How long do you think that redboard would play installed in a driver?
[/quote]

It's a 3 wood shaft