Going to be a great day.....

[justasgood]

Perfect weather and classic gear. Happy day!!!

 

Let’s see what y’all are slingin’ today:

 

 

[PeanutsDaddy]

[Fellaheen51]

Is that a graphite shaft I see in that shovel? Sweet. Makes it easier to sling snow at the lighter SW.

 

All these folks, that live in sunny climes, causally dropping "perfect weather" in their posts is becoming wearisome. Have a nice day.

[sdandrea]

 

 

What's the swingweight on that snowshovel?

[PeanutsDaddy]

Canadian Tire Tour Department.

 

F9 swing weight. A little on the head heavy side.

 

Needs a new grip, but the multi-material leading edge is pure ‘butter knife’. No struggles carving a divot in the snow. A whole lot of shovel with a wee bit of blade built in. The ultimate in forgiveness.

[Hernasco]

If it makes any of you winter weather sufferers up north feel any better...it's dark, overcast, and raining in the Sunshine State right now! ☺

[Swingingk]

It's nice to know someone out there is getting some. Not feeling it myself. At -32C it's the "warmest" morning we've seen in a week. I hope we get an early spring!

[Hernasco]

^^ Yikes!!!

[stixman]

It's nice to know someone out there is getting some. Not feeling it myself. At -32C it's the "warmest" morning we've seen in a week. I hope we get an early spring!

 

Not familiar with this sort of weather. Where abouts are you approx for my reference?

[wkuo3]

Perfect weather and classic gear. Happy day!!!

 

Let's see what y'all are slingin' today:

 

 

 

Have fun,

As we have people coming out to ski on the closed hilly streets in the Cities, there be no golf and more snow is coming this way.

I'm just glad I had my kidney stone taken out and get the prescription filled.

No outdoor events for a long time.

[Swingingk]

It's nice to know someone out there is getting some. Not feeling it myself. At -32C it's the "warmest" morning we've seen in a week. I hope we get an early spring!

 

Not familiar with this sort of weather. Where abouts are you approx for my reference?

 

I'm in Saskatchewan, Canada. We broke a 112 year temperature record last week at -43c, which was a rare low and rather uncomfortable. We have beautiful summers but the winters can be somewhat difficult.

[stixman]

It's nice to know someone out there is getting some. Not feeling it myself. At -32C it's the "warmest" morning we've seen in a week. I hope we get an early spring!

 

Not familiar with this sort of weather. Where abouts are you approx for my reference?

 

I'm in Saskatchewan, Canada. We broke a 112 year temperature record last week at -43c, which was a rare low and rather uncomfortable. We have beautiful summers but the winters can be somewhat difficult.

Thanks, my sympathy!

[BIG STU]

Canadian Tire Tour Department.

 

F9 swing weight. A little on the head heavy side.

 

Needs a new grip, but the multi-material leading edge is pure 'butter knife'. No struggles carving a divot in the snow. A whole lot of shovel with a wee bit of blade built in. The ultimate in forgiveness.

No problem with the F-9 SW just counter balance it with around 20 grams of lead tape on the butt end------ You knew I just had to say that :taunt:

[Bigarch]

I spent my crappy Sunday out in the garage on my loft and lie machine. I decided I needed to spec out all of the iron sets I have been known to play with and then build a spreadsheet on my computer to keep track of all the specs. Yes, I realize this was a total nerd thing to do, but what the hell else am I gonna do while its raining and sleeting outside, right?

 

Some of the things I found were very surprising. I might have to start a new thread. Hope everyone enjoyed your Sunday!

[stickfish]

 

Obviously a fake, rivets with the scraper edge not ground down dead giveaway. 'D' handle doesn't have the correct font as well.

 

Spent today doing a slip and slide down the front brick steps account ice/sleet accumulation, expecting another 2" to 4" of rain later.

<><

[resnor]

That's effing genius, stickfish!!

[teevons]

It's nice to know someone out there is getting some. Not feeling it myself. At -32C it's the "warmest" morning we've seen in a week. I hope we get an early spring!

 

Not familiar with this sort of weather. Where abouts are you approx for my reference?

 

I'm in Saskatchewan, Canada. We broke a 112 year temperature record last week at -43c, which was a rare low and rather uncomfortable. We have beautiful summers but the winters can be somewhat difficult.

Somewhat!!!!

[Swingingk]

It's nice to know someone out there is getting some. Not feeling it myself. At -32C it's the "warmest" morning we've seen in a week. I hope we get an early spring!

 

Not familiar with this sort of weather. Where abouts are you approx for my reference?

 

I'm in Saskatchewan, Canada. We broke a 112 year temperature record last week at -43c, which was a rare low and rather uncomfortable. We have beautiful summers but the winters can be somewhat difficult.

Somewhat!!!!

 

Ha! Yeah, well let's just say that one must maintain a certain level of positive thinking when dealing with less than desirable circumstances. It's not that bad if you're tooled up for it. Lol

 

My golf cycle (spring-summer-fall) goes from April to October for seven months +/- of viable course time. The middle five months are fantastic with up to 18 hours of daylight at midsummer. Smooth prairie weather with huge blue skies, few rain days, and reasonably priced courses all over the place actually makes for a pretty awesome place to live golf-wise.

 

In other words: it may not be Florida, but it's not as bad as it sounds.

[James the Hogan Fan]

 

Obviously a fake, rivets with the scraper edge not ground down dead giveaway. 'D' handle doesn't have the correct font as well.

 

Spent today doing a slip and slide down the front brick steps account ice/sleet accumulation, expecting another 2" to 4" of rain later.

<><

 

Well he said it was Canada’s tire, so I imagine it’s a storeline model, I thought those features were proshop only?

 

(You made me spew coffee there :D)

[mocokid]

 

I use the gooseneck / offset model with the shaft curved. Better for back.