How much does the Stroke Lab Shaft weigh?

[agood3putt]

I have this Toulon Las Vegas H7 35” with the 20g sole weight, thinner odyssey pistol grip and thinking about getting a KBS shaft put in it. I believe I saw the counterbalance weight is in the butt end if the shaft but need to know the weight of the grip and the shaft with the weight plug in it if possible? Trying to figure out which grip to put on it if I go the KBS CT shaft route thanks!

[MattM97]

Shaft is in the 70g range, obviously varies on the length a bit.

[Kpt37]

The stroke lab shaft from my Toulon Las Vegas h7, which plays at 34”, is 77 grams without the counterweight. I believe the weight plug is 30 grams

[Kpt37]

Actually upon further research the weight plug is 40 grams

[agood3putt]

Thanks everyone!

[Hokie2k5]

Is the weight plug in the shaft or the grip? I have a toulon stroke lab and wondered if I changed the grip if it would mess with the swing weight a lot. obviously the weight of the grips would matter but I didn’t know if the stroke lab grips were extra heavy to aid the counter balance.

[agood3putt]

The plug is at the butt end of the shaft

[RollinsonPutters]

The plug weight depends on the grip type installed by Odyssey. The oversized grip has a 40g weight and the pistol grip has a 30g weight.

[speeder757]

Is the weight removable?

[RollinsonPutters]

Depends on the vintage of the putter. The original ones were glued into the end of the shafts. The current Triple Track and Stroke Lab Black they are friction-fit with o-rings.

[Kpt37]

Mine was the epoxied in one and was easily removed with a little heat

[dirtygooner]

Not a weight question but I figured this would be the best place to ask this. I just bought a Las Vegas H7 in 35" as well from Callaway Pre-Owned; I've wanted one for a while and I couldn't pass up a 'Like New' condition for $225 out the door. Question is, if I wanted to try out a shorter shaft, particularly the KBS in a 34", would I void the 90 day warranty if I took it to a professional club builder to switch it out? I'm hoping that does the trick and I won't need to worry about returning it. But if it doesn't, would I be screwing myself by simply taking the head out and having it put back on the Stoke Lab in the end if the KBS doesn't work either? All would be done professionally and not by my janky self of course.

[03trdblack]

 

[Hokie2k5]

Any idea what the grip weight of the stroke lab oversize grip would be?

[agood3putt]

65g as shown above. The smaller pistol is 75g