MACHINE Putters Picture Thread

[BP5168]

[quote name='choeppner' timestamp='1309907684' post='3367009']
I might as well be in GA. LOL Work keeps me pretty busy these days It's also still an 11 hour drive. LOL TX is HUGE
[/quote]

The main offices are here.....

All I saw you say right there is blah blah, excuse excuse, blah blah blah ....

No really ... when are you coming into DFW?

[choeppner]

LOL Let me see what I can work with Uncle Sam. LOL LOL LOL

[NWS Alpine]

Sent you an email about getting a putter made. I really like the hot salts finish. Want a belly/normal length hybrid made.

[weaver93]

I just wanted to share with the rest of you Machine Heads.

I have been trying to get this one from dave for a while now and today it finally came home! It was a year or so ago that I first saw it and I really liked the way the back of the head was cut away exposing the hosel.

It is a M4M "Meritage" Proto made with End Game head, Damascus tongue insert, hand ground boat back aluminum bronze flange, and of course modular center shaft hosel (also AlBz). There are some in process pictures a page or so back, but I wanted to show off the finish. It has to be one of my favorite flame finishes so far! I hope you guys like it !


[attachment=816814:DSC_7384_edited-1.jpg]



[attachment=816815:DSC_7387_edited-1.jpg]



[attachment=816816:DSC_7389_edited-1.jpg]

[mattl2787]

holy acid trip!

[choeppner]

Glad you like that one Mark It's one of my favorite ones so far :)

Hope she see's the course alot

-Chris

[w8liftr]

Wow

[NWS Alpine]

Glad you like that one Mark :) It's one of my favorite ones so far :):):)

 

Hope she see's the course alot :)

 

-Chris

 

 

When you check your email just skip the first two from me and go to the last. i was confusing the models and options. Let me know as I want to order the putter asap.

 

 

[choeppner]

Hello,

Working on it right now

Thanks

-Chris

[NWS Alpine]

[quote name='choeppner' timestamp='1310088608' post='3373396']
Hello,

Working on it right now

Thanks

-Chris
[/quote]



Thanks got the quote. As Michael Breed would say "Lets dooooooo thiiiis!"

[GUMBINGER]

Chris,

Any word on my goods?? Its been forever.

[BP5168]

[quote name='weaver93' timestamp='1310081711' post='3373136']
I just wanted to share with the rest of you Machine Heads.

I have been trying to get this one from dave for a while now and today it finally came home! It was a year or so ago that I first saw it and I really liked the way the back of the head was cut away exposing the hosel.

It is a M4M "Meritage" Proto made with End Game head, Damascus tongue insert, hand ground boat back aluminum bronze flange, and of course modular center shaft hosel (also AlBz). There are some in process pictures a page or so back, but I wanted to show off the finish. It has to be one of my favorite flame finishes so far! I hope you guys like it !


[attachment=816814:DSC_7384_edited-1.jpg]



[attachment=816815:DSC_7387_edited-1.jpg]



[attachment=816816:DSC_7389_edited-1.jpg]
[/quote]

........ when will you be selling this to me?

I have never wished someone could not putt with their newly purchased flatstick .... but .... I'm kind of coming close .....

Seriously, good luck with that one, it is BEAUTIFUL! I am envious right now.

Ok seriously when are you selling it to me?

[choeppner]

Hey Guys,

 

I hope everyone is having a great Friday :) I wanted to share some sweet pics with you of the MACHINE Golf Club Damascus Ball Makers. These are still a work in progress right now as you can see :) We still have a lot of hand finishing, custom stamping, acid etching and finishing to do on these, but I hope you agree, they are going to look stunning when completed :)

 

Enjoy :)

 

-Chris

 

 

[jwizzle497]

I apologize I don't have the time to go back through all the pages of this thread, but I cam across these putters and have a few questions.

1. When are they available?
2. How much do they cost?
3. How do they feel? Are the soft? What do they compare with?

4. I saw the fatback and liked it can anyone provide me details about this putter?

Thanks!

[choeppner]

Hello Sir,

Thanksr your questions. All of our putters are custom built to order. The cost is all dependent on the Material and the options you choose.

Due to our VMG Face milling they are slightly softer than the standard putters. I can't tell you exactly what they feel like, but we haven't had any complaints yet

On the Fat Back, we offer 2 different models. We offer the Standard Fat Back, which is twice the width of a Blade Back Flange and the Heavy Fat Back which is the same width but beefed up.

If you have any questions, feel free to contact me at [email protected]

Thanks in advance

-Chris

[SwingBlues]

[quote name='weaver93' timestamp='1310081711' post='3373136']
I just wanted to share with the rest of you Machine Heads.

I have been trying to get this one from dave for a while now and today it finally came home! It was a year or so ago that I first saw it and I really liked the way the back of the head was cut away exposing the hosel.

It is a M4M "Meritage" Proto made with End Game head, Damascus tongue insert, hand ground boat back aluminum bronze flange, and of course modular center shaft hosel (also AlBz). There are some in process pictures a page or so back, but I wanted to show off the finish. It has to be one of my favorite flame finishes so far! I hope you guys like it !


[attachment=816814:DSC_7384_edited-1.jpg]



[attachment=816815:DSC_7387_edited-1.jpg]



[attachment=816816:DSC_7389_edited-1.jpg]
[/quote]

STUNNING! I would be afraid to take it out on the course, you'll spend more slobbering all over the putter than making a putt with it...

PS Choeps - my M2A is doing well, no need for another finish at this time...it's on a roll and the scrubbie is kept far, far away on a distant galaxy

[choeppner]

Thanks Alby Glad your MACHINE is doing good

[NWS Alpine]

Ugghhh Chris please sneak one of those in with my putter order please. Damascus ball marker for the win!

[preacher]

Those are looking sweet!

--jason

[BigLeftyAllAmerican]

I am unfamiliar with the [color=#1C2837][size=2]Damascus metal. what is so special about it besides its appearance? [/size][/color]

[bdhicks07]

Here is my newest machine. It is my 4th so you know I love these putters. I will try to snap a couple pictures of my others.

[attachment=820686:MP_M2A_B_Hicks_StepBack_ReFin_16c.jpg]

[bdhicks07]

Here is two of my other Machines. One is a copper converter with a black spacer and carbon steel plumbers neck with a black finish. The other is an oil can M6. The pictures are not that good due to the camera.
[attachment=820692:DSC01601.JPG]
[attachment=820693:DSC01602.JPG]

[ramylson]

Hey Guys,

 

I hope everyone is having a great Friday :) I wanted to share some sweet pics with you of the MACHINE Golf Club Damascus Ball Makers. These are still a work in progress right now as you can see :) We still have a lot of hand finishing, custom stamping, acid etching and finishing to do on these, but I hope you agree, they are going to look stunning when completed :)

 

Enjoy :)

 

-Chris

 

 

 

Are these the ones from/for the Machine Club? Man oh Man.. drooling just thinking about it.

[choeppner]

Thanks For Sharing Ben I Love that Notch-Back

These are the Ball Markers for the MGC

-Chris

[SwingBlues]

[quote name='choeppner' timestamp='1310603738' post='3389420']
Thanks For Sharing Ben I Love that Notch-Back

[b][color="#FF0000"]These are the Ball Markers for the MGC[/color][/b]

-Chris
[/quote]

Ready...all in unionson now...one...two...three..

[ramylson]

[quote name='choeppner' timestamp='1310603738' post='3389420'][b][color="#FF0000"]These are the Ball Markers for the MGC[/color][/b] [/quote]

Awesome!

Btw, you have any of the gold or white limited headcovers left?

[quote name='SwingBlues' timestamp='1310622055' post='3390068']
Ready...all in unionson now...one...two...three..


[/quote]

Agreed!

[choeppner]

Thought yall would like those

I need to check on the Head Covers. I know we are waiting on White Headcovers to come in. I can check and see if I have any gold left at the office

Thanks

-Chris

[ksgolfguy007]

hey Chris any news on mine?

[theuglystick]

[quote name='choeppner' timestamp='1310603738' post='3389420']
These are the Ball Markers for the MGC

[/quote]

How do you get into the MGC? I want one of those markers!

[choeppner]

[quote name='ksgolfguy007' timestamp='1310669380' post='3391548']
hey Chris any news on mine?
[/quote]

Hello,

Let me contact the office and see what I can find out

Thanks

-Chris