MACHINE Putters Picture Thread

[Chasingolf]

Yes he is a good guy. Thanks for the info guys, now I just want to customize it

[weaver93]

[quote name='Chasingolf' timestamp='1313170264' post='3477640']
Yes he is a good guy. Thanks for the info guys, now I just want to customize it
[/quote]


You don't have far to go! Get rid of the STONE and add your neck and you are there!

That thing has a major ammount of work in it. That peening was some major work. I remember when Dave was doing that one. Ball cuts on top and flange,sight line top and flange, man you are well on your way. And if I remember correctly you are getting a deal too!

Welcome to the Machine.

[choeppner]

That one did go for a STEAL We're going to customize this one even more and make it PIMP for the new owner

-Chris

[weaver93]

[quote name='choeppner' timestamp='1313199814' post='3479167']
That one did go for a STEAL We're going to customize this one even more and make it PIMP for the new owner

-Chris
[/quote]


PIMP putters? You guys don't do that, do you?

Whats up Sgt?

[Chasingolf]

Yes I am very happy to be getting in from Chris by next week. She is gorgeous and I look forward to buying more Machine putters in the future.

Just can't wait to put a disco ball hosel on it and a new flange, plus the lime green is pretty hot haha.

[choeppner]

[quote name='weaver93' timestamp='1313201129' post='3479273']

PIMP putters? You guys don't do that, do you?

Whats up Sgt?
[/quote]

I plead the 5th..... LOL

[choeppner]

Hey Guys,

 

I hope everyone is having a great day :) I wanted to share pics of another MACHINE Work In Progress :)

 

This is a MACHINE M2A Converter Garage with a 303 Stainless Head, a 303 Modular Center Shaft Hosel, a 303 Stainless Tongue Back Flange and a Custom Double Width 303 Stainless Spacer :)

 

Next step for this MACHINE will be custom milled sightlines (one on the topline and three in the cavity) Which will be milled on the Bridgeport. The Hosel will be welded to the head and everything given a Morning Dew Satin Torch Finish :)

 

More pics as she progresses :)

 

Thanks

 

-Chris

 

[NWS Alpine]

Chris - When does the Machine club stuff typically go out? Loved the teaser pics of the ball markers. I love to have matching ball markers/divot tools to the putter I use. I like to think it brings some good putting Karma.

Also can't wait to possibly get my Machine this week! I hate waiting when it's so close the the end!!!

[SwingBlues]

[quote name='NWS Alpine' timestamp='1313422758' post='3487719']
Chris - When does the Machine club stuff typically go out? Loved the teaser pics of the ball markers. [color="#FF0000"] I love to have matching ball markers/divot tools to the putter I use.[/color] I like to think it brings some good putting Karma.

Also can't wait to possibly get my Machine this week! I hate waiting when it's so close the the end!!!
[/quote]

[color="#FF0000"]+1[/color] on that one

[Ol' Dirt McGirt]

Are you guys still making that 8802 style putter if so is it available in LH?

Cheers.

[choeppner]

Hello Sir,

Unfortunately, At this time we are not making an 8802 Style Head.

Thanks in advance

-Chris

[choeppner]

Hey Guys :)

 

I hope everyone had a great week :) I wanted to share pics of an item that is going to start shipping to our MACHINE Golf Club Members next week :)

 

Enjoy :)

 

-Chris

 

 

[ramylson]

O.. M.. G..

Amazing. A seriously stunning piece. Dave has done it, yet again.

[Chasingolf]

I need to get longer screws for my Machine putter. Does anyone know if I can get similar ones at a hardware store?

Thanks,

Chase

[choeppner]

Which screws do you need?

Thanks

-Chris

[Chasingolf]

I need longer screws for a spacer plate. Mine are just shorter for a normal answer style head with a tongue flange. So I need screws for the spacer weight to fit in.

-Chase

[SwingBlues]

Woah...*NICE* ball marker Dave & Choeps!

[putt4_66]

Very, very nice!!

Hey Guys :)

 

I hope everyone had a great week :) I wanted to share pics of an item that is going to start shipping to our MACHINE Golf Club Members next week :)

 

Enjoy :)

 

-Chris

 

 

[sethg]

I spent much of the afternoon today at the Machine Putter garage today watching Dave finish my long putter. I am sure I drove Dave crazy, but let me just say what a terrific guy he is and how much attention to detail and artistry goes into the process.

It turned out my putter needed be remilled b/c of a goof the millshop made on one of the specs, but Dave still spent several hours on what is basically going to be a free test putter so I wouldn't go home empty handed and he didn't want anything leaving his shop that wasn't just right. Pretty remarkable. I have never seen that kind of service from a company in the golf industry.

While at the Garage, I got to roam around a bit and saw some remarkable putters on the way to folks. The damascus putters are quite a sight to see. There was also one stainless steal putter with a copper insert that caused me to think about a potential second order!

I caught my flight back home feeling like a PGA Tour player with my putter in hand! Now I will end up having two machine putters. Thanks Dave. I will leave it to Dave or Chris to post some pictures. Can't wait to get my finished product which will be one of the first made on the new milling equipment Dave is bringing into the Garage.

Seth

[NWS Alpine]

Must be nice! Hope you didn't leave any fingerprints on my putter. It's suppose to go out hopefully tomorrow or friday. It was an 4.0 adjuster with a belly and normal shaft with short round hand bent hosels and their awesome hot salts gmb finish. Send me some pics if you saw it. I'm getting antsy

[choeppner]

Hey Guys,

Sorry for the delay. I had a board at work today that took up ALOT of my time. I am catching up on e-mails and PM's right now and should have pics to post tomorrow

Thanks

-Chris

[choeppner]

Hey Guys,

 

I hope everyone is having a great day and had a great week :) I wanted to share pics of this MACHINE Putter that was just finished and is getting ready to ship to it's new owner :)

 

This is a 4.0 M2A Converter with a 303 Stainless Head, a 303 Stainless Fat Back Nibble Back Flange and a 303 Stainless Hand Bent Hosel :) The finish on this MACHINE is our Morning Dew Rainbow Torch Finish :)

 

Enjoy the pics :)

 

-Chris

 

 

 

 

 

[choeppner]

Hey Guys,

 

I hope everyone is having a great day :) I wanted to share pics of a duet of MACHINE Putters that were just completed and shipped to their new owner :)

 

The first MACHINE is a Left Hand Damascus M1A Adjuster with a Damascus Head and a Damascus Plumber Neck :) This is the first Left Handed Damascus we made :) This MACHINE was finished in our Hot Salts Gun Metal Blue Finish :)

 

The second MACHINE is a Left Hand M1A Adjuster with a 303 Stainless Head and a 303 Stainless Pill Cut Plumber Neck :) The finish on this MACHINE is our Antique Charcoal Torch Finish :)

 

Enjoy :)

 

-Chris

 

 

 

 

 

[SwingBlues]

... the Damascus is to *DRRRROOOL* for. Nice work Dave!

[dablph]

Hey Guys,

 

I hope everyone is having a great Friday :) I wanted to share some sweet pics with you of the MACHINE Golf Club Damascus Ball Makers. These are still a work in progress right now as you can see :) We still have a lot of hand finishing, custom stamping, acid etching and finishing to do on these, but I hope you agree, they are going to look stunning when completed :)

 

Enjoy :)

 

-Chris

 

 

 

 

Just, Wow! Been waiting a long time for one of these....hope my dues are current it's been that long that I can't remember :fool:

[NWS Alpine]

Machine does it again!!!

I wonder who is the genius with amazing taste that ordered this putter. It comes with one of every weight so It can be as heavy as 380g. The reason for that is because it has a second hosel exactly the same with a Belly shaft so this putter can convert back and forth with a turn of a wrench. Hand bent round hosels and heavy melting really smooth out this putter.

[attachment=859560:MP_M1A_1.jpg]

[attachment=859561:MP_M1A_2.jpg]

[attachment=859562:MP_M1A_3.jpg]

[attachment=859563:MP_M1A_4.jpg]

[SwingBlues]

Nice one NWS, good to see the belly madness even crept into this MACHINE thread

[choeppner]

Thanks for sharing Nick She is a purty one I hope she sinks a ton of putts for you

[choeppner]

Hey Guys,

 

I hope everyone is having a great day :) I wanted to share pics of this MACHINE that is fixing to ship to it's new owner :)

 

This is a 4.0 MACHINE M1A Adjuster with a 303 Stainless Head and a 303 Stainless Plumber Neck. The Head and Neck have been finished in our Morning Dew Satin Finish. The Bumpers and Neck have been given a heavy melting to give a smoother, more flowing look :)

 

Enjoy :)

 

-Chris

 

 

 

 

 

[choeppner]

Hey Guys,

 

I hope everyone had a great week :) I wanted to share another MACHINE Custom with you that is getting close to being finished. This is a 4.0 M2A Converter with a 303 Stainless Head, a 303 Stainless Beefy Back Flange and a 303 Stainless Short Fluted Hand Bent Hosel :) Dave is going to be working on bending this hosel this weekend :)

 

The bumpers on this MACHINE have been melted for a more flowing look :)

 

Enjoy :)

 

-Chris