MACHINE Putters Picture Thread

[golfswede]

[quote name='MarkFromTheUK' timestamp='1329252038' post='4285829']
[quote name='golfswede' timestamp='1329250434' post='4285625']
You can have them left, right or even both! LOL!
You'll find that out when you search the forum...
[/quote]

122 pages is a lot to bother searching through.

Thanks for your email address, Chris. I'm composing an email to you right now.
[/quote]
Page 117
MACHINE Frank-N-Eye Custom

[MarkFromTheUK]

Ok well I've decided to have a look through the entire thread... I am only on page 2 and have already fallen in love with an 8802 style.

 

Finding this thread is going to prove VERY expensive...

[sompin2do]

Ok well I've decided to have a look through the entire thread... I am only on page 2 and have already fallen in love with an 8802 style.

 

Finding this thread is going to prove VERY expensive...

 

Wait till you see the new groove options

[Jodymac]

Ok well I've decided to have a look through the entire thread... I am only on page 2 and have already fallen in love with an 8802 style.

 

Finding this thread is going to prove VERY expensive...

 

Ha!!! Seems like the Machine picture thread has claimed another victim!!! Don't feel bad your not alone The thread pulled me in too and I'm loving it!!!

 

 

 

[MarkFromTheUK]

Ok, after much deliberation I have decided to go for this style in leftie:

[attachment=1024983:post-108914-0-27218500-1316185911_thumb.jpg]

In Damascus steel, with an antique charcoal torch finish.

I think I'll add a sight line too.

(page 112 inspired me greatly)

[Geo]

Ok, after much deliberation I have decided to go for this style in leftie:

 

 

 

In Damascus steel, with an antique charcoal torch finish.

 

I think I'll add a sight line too.

 

(page 112 inspired me greatly)

 

That's not a bad choice at all. Kinda close to what I went with--though I figure Damascus is more for looking at and less for putting. Here's mine--just for lefty reference...with a sight line, and antique charcoal finish. And because it's been a while since we've seen some lefties in this thread. Get to work, boys. :glare: ;)

 

 

Funny about this thread being too long though. I find the best books are usually over 300 pages. I can't wait for this thread to get to that level of great! :good:

[choeppner]

I wondered when you were going to chime in George. LOL Hope she is still rolling the rock going for you

-Chris

[DB MACHINE]

Thanks George! Looking forward to completing your M10 LH #1!

Hey Everyone, sorry for the delay in posts here, I've been tied up with lots of IP work, but back working in the shop too and catching up on custom orders.

Here is a special putter shipping out this coming week to a very good friend:

This is MACHINE M2A iX Copper Insert #2 of 2 Garage Putter, outfitted with Heavy FatBack Flange, Copper Streak spacer, Modular Center Shaft-over hosel, Torched Damascus Logo Medallion, UST Frequency Filter shaft and Black Ano Drill Here MACHINE Grip...

More photos of other customs coming this week!

All the best,

-Dave

[attachment=1031983:MP_M2A_Cu_iX_M_Weaver_2of2_18c.jpg]


[attachment=1031991:MP_M2A_Cu_iX_M_Weaver_WIP_2of2_16f.jpg]


[attachment=1031985:MP_M2A_Cu_iX_M_Weaver_2of2_18mg_cu.jpg]


[attachment=1031987:MP_M2A_Cu_iX_M_Weaver_2of2_18mg_ihbc.jpg]

[weaver93]

[quote name='DB MACHINE' timestamp='1329665447' post='4322989']
Thanks George! Looking forward to completing your M10 LH #1!

Hey Everyone, sorry for the delay in posts here, I've been tied up with lots of IP work, but back working in the shop too and catching up on custom orders.

Here is a special putter shipping out this coming week to a very good friend:

This is MACHINE M2A iX Copper Insert #2 of 2 Garage Putter, outfitted with Heavy FatBack Flange, Copper Streak spacer, Modular Center Shaft-over hosel, Torched Damascus Logo Medallion, UST Frequency Filter shaft and Black Ano Drill Here MACHINE Grip...

More photos of other customs coming this week!

All the best,

-Dave

[attachment=1031983:MP_M2A_Cu_iX_M_Weaver_2of2_18c.jpg]


[attachment=1031991:MP_M2A_Cu_iX_M_Weaver_WIP_2of2_16f.jpg]


[attachment=1031985:MP_M2A_Cu_iX_M_Weaver_2of2_18mg_cu.jpg]


[attachment=1031987:MP_M2A_Cu_iX_M_Weaver_2of2_18mg_ihbc.jpg]
[/quote]

Looks great DB! Can't wait to see it in person. You sure put a lot of work in this project! Thanks for putting up with the aggravation!

[DB MACHINE]

[quote name='weaver93' timestamp='1329706292' post='4328317']

Looks great DB! Can't wait to see it in person. You sure put a lot of work in this project! Thanks for putting up with the aggravation!
[/quote]

Thanks Mark! No aggravation whatsoever. Thanks all go to you for all your support, patience and the free reign you give me!

-Dave

[blade_man]

[quote name='weaver93' timestamp='1329706292' post='4328317']
[quote name='DB MACHINE' timestamp='1329665447' post='4322989']
Thanks George! Looking forward to completing your M10 LH #1!

Hey Everyone, sorry for the delay in posts here, I've been tied up with lots of IP work, but back working in the shop too and catching up on custom orders.

Here is a special putter shipping out this coming week to a very good friend:

This is MACHINE M2A iX Copper Insert #2 of 2 Garage Putter, outfitted with Heavy FatBack Flange, Copper Streak spacer, Modular Center Shaft-over hosel, Torched Damascus Logo Medallion, UST Frequency Filter shaft and Black Ano Drill Here MACHINE Grip...

More photos of other customs coming this week!

All the best,

-Dave

[attachment=1031983:MP_M2A_Cu_iX_M_Weaver_2of2_18c.jpg]


[attachment=1031991:MP_M2A_Cu_iX_M_Weaver_WIP_2of2_16f.jpg]


[attachment=1031985:MP_M2A_Cu_iX_M_Weaver_2of2_18mg_cu.jpg]


[attachment=1031987:MP_M2A_Cu_iX_M_Weaver_2of2_18mg_ihbc.jpg]
[/quote]

Looks great DB! Can't wait to see it in person. You sure put a lot of work in this project! Thanks for putting up with the aggravation!
[/quote]

As soon as I saw this I said that has to be Marks! Congrats man, looks great!

[w8liftr]

Beautiful putter Mark!

[choeppner]

Hey Guys,

 

I hope everyone is having a great night :) I wanted to share pics of a Custom MACHINE with you :)

 

These photos show the MACHINE M10 Prototype ART Putter #1 that we are building for a customer :) In these pics, the Bumpers have been melted and the head has received Dave's Hand Hammered Peening. The hosel is a new Faceted Hand Bent Mid Slant Shaft in Cup hosel shown after some finishing of the facets. :)

 

More work to go, but she is going to be gorgeous when complete :)

 

Enjoy

 

-Chris

 

 

 

 

[rymail00]

damn my hand is cramping just looking at it. how many hours go into that peening

[choeppner]

The hand hammered peening does take awhile, but is very worth it

-Chris

[rymail00]

I agree it klooks awesome

[weaver93]

I love how fine the peening is. It looks almost like leather! Great work Dave!

[Snufles]

Hey Guys,

 

I hope everyone is having a great night :) I wanted to share pics of a Custom MACHINE with you :)

 

These photos show the MACHINE M10 Prototype ART Putter #1 that we are building for a customer :) In these pics, the Bumpers have been melted and the head has received Dave's Hand Hammered Peening. The hosel is a new Faceted Hand Bent Mid Slant Shaft in Cup hosel shown after some finishing of the facets. :)

 

More work to go, but she is going to be gorgeous when complete :)

 

Enjoy

 

-Chris

 

 

 

 

 

She is beautiful NOW!!! Wouldn't change a thing.

[rymail00]

can we see pics of the adjustable model with something different attatch to it?

[choeppner]

[quote name='rymail00' timestamp='1329963932' post='4354895']
can we see pics of the adjustable model with something different attatch to it?
[/quote]

Hello,

Do you mean the M20? That would be the Converter Model of the M10 in which you can change out the flange to change the head shape If so, let me get with Dave and see what I can do for you I know we are still working on this model.

Thanks in advance

-Chris

[choeppner]

[quote name='Snufles' timestamp='1329954207' post='4353595']
She is beautiful NOW!!! Wouldn't change a thing.
[/quote]

Thanks If you think she looks good now, wait till you see her when she is finished She's going to be a real looker

Thanks

-Chris

[rymail00]

can we see pics of the adjustable model with something different attatch to it?

 

Hello,

 

Do you mean the M20? That would be the Converter Model of the M10 in which you can change out the flange to change the head shape :) If so, let me get with Dave and see what I can do for you :) I know we are still working on this model.

 

Thanks in advance

 

-Chris

 

Exactly!! I had a hard time explainging it

[choeppner]

Hello,

That one is in the works As soon as we have one finished with pics, I will definitely post them

Thanks in advance

-Chris

[choeppner]

Hey Guys,

 

I hope everyone had a great week :) I wanted to share pics of a Custom MACHINE that was just finished for a customer :)

 

This is a MACHINE M6 IbCH. The head was milled from 1018 Carbon. The finish is Custom Antique Charcoal Torched Oil Rubbed finish :)

 

The Head Weight on this MACHINE as pictured is 352 Grams :)

 

Enjoy

 

-Chris

 

 

 

[bdhicks07]

Now that's a good looking gamer. LOL

[choeppner]

[quote name='bdhicks07' timestamp='1330206242' post='4375635']
Now that's a good looking gamer. LOL
[/quote]
Thanks Ben

-Chris

[choeppner]

Hey Guys,

 

I hope everyone is having a great weekend :) I wanted to share some pics of a Custom MACHINE that was just completed for a customer :)

 

This MACHINE features a M2A Converter Head milled from Aluminum Bronze, an Aluminum Bronze Double Fat Back Flange and a Aluminum Bronze Modular Center Shaft Hosel.

 

This MACHINE as pictured is 408 Grams :)

 

Enjoy

 

-Chris

 

 

[WVP]

Chris, I'm sure it's been covered at some point but what does that hosel design achieve, or what's the thinking behind it? Certainly looks cool but wondering how it affects the feel and playability.

Great looking putter BTW....

[choeppner]

Hello,

The Modular Center Shaft Hosel gives you the same benefits of having a Center-Shaft but without having to have the hosel welded or drilled into the middle of the putter. It gives you the look and the face balanced toe hang of a Center-Shaft while not limiting your options on being able to change the hosel for any other hosel

Please let me know if this helps.

Thanks

-Chris

[WVP]

Thanks Chris - do you have a pic of that aluminum bronze putter from address?