Project X T1100 Even Flow White

[QuigleyDU]

I liked this shaft, but it just lacked pop.

[Tree Levino]

Got fitted for TS3 8.5 A1 weight in heel with EFW 6.0. I see the torque rating for the 6.0 and 6.5 are the same? How much of a difference is there between the two shafts?

[mister2cool]

> @balls_deep said:

> Got fitted for TS3 8.5 A1 weight in heel with EFW 6.0. I see the torque rating for the 6.0 and 6.5 are the same? How much of a difference is there between the two shafts?

 

About 30 lbs of pure muscle...

 

No seriously.. not entirely sure what you mean by how much difference? It's half a flex so you need about 5-10MPH more swing speed to be able to consistently load it up properly. As far as ball flights, should not be much at all if you compare a 6.0 @105MPH vs 6.5 @110MPH.

[Tree Levino]

 

 

 

I ask because generally torque decreases as you go stiffer in flex. That is not listed as the case with these shafts. I think I should probably go for the 6.0 given that is what I play in Hzrdus black. I don’t think I could do 6.5 in the black so from what I’ve read the EFW would be similar > @mister2cool said:

> > @balls_deep said:

> > Got fitted for TS3 8.5 A1 weight in heel with EFW 6.0. I see the torque rating for the 6.0 and 6.5 are the same? How much of a difference is there between the two shafts?

>

> About 30 lbs of pure muscle...

>

> No seriously.. not entirely sure what you mean by how much difference? It's half a flex so you need about 5-10MPH more swing speed to be able to consistently load it up properly. As far as ball flights, should not be much at all if you compare a 6.0 @105MPH vs 6.5 @110MPH.

 

 

[mister2cool]

> @balls_deep said:

> I ask because generally torque decreases as you go stiffer in flex. That is not listed as the case with these shafts. I think I should probably go for the 6.0 given that is what I play in Hzrdus black. I don’t think I could do 6.5 in the black so from what I’ve read the EFW would be similar

>

 

I think traditionally torque and flex does correlate that way but that may not be the case anymore with modern construction with newer material.

If you use HZRDUS Black in 6.0, I think you should stick with 6.0 in EFW. The thing though is you would probably **FEEL **EFW being much softer at the same flex compared to HZRDUS Black. It's just the EF profile has more of a smooth feel than HZRDUS profile.

 

[PR3CI5N]

Got fitted the other day for the Even Flow White 100 Hybrid and what a shaft! I'll be putting it on my new U510 3-iron.

[nolanb2]

Did you ever end up trimming it down to 44”? Thinking about doing the same.

[kmck15]

I'm as late to trying this shaft as I am to this discussion, but I wanted to give my two cents.

 

I spent 3 years in a proforce vtx silver 6x and this since lifting a lot more and getting stronger, decided to seek out something a bit stouter. I tried the fuji speeder pro ts which I liked but the 7x was a bit heavy. I am currently gaming the ef white in a 6x which may be a hair light for me but still better than 7x probably.

 

I have found that this shaft is very long for me given the added bit of "kick" that I am feeling near the handle, with my smoother swings this shaft has been perfect; however, I have been tugging it left when I step on it a bit. Not sure if this has been other people's experience or not but I'm struggling to decide whether the extra couple yards is worth the slightly worse miss.

[Poolparty]

Its a great shaft, no doubt about it. The only problem is that the X isn't that stiff relatively. That works fine for me so I'm not complaining, but it won't be stiff enough for everyone