Ping G30 LS Tec Driver

[BlakeBstone]

Swing weight is right where I like it I was thinking of hotmelting for sound purposes

[WindyCitySPN]

[quote name='bazinky' timestamp='1432949801' post='11653498']
Anyone tried this driver with an Aldila Tour Green?
[/quote]

I hit the LS with the tour green for me created too much spin, i ended up going with a speeder. PM me if you have any specific questions.

[KC35]

Received my g30ls at 9* with rogue 125 msi. The best driver I played far! I don't swing particularly fast ~95-100 but I drove to places I've never been in the past.

My only criticism is feel and sound. The tiny high pitched "ping" just doesn't feel as nice but I can for sure get used to the performance.

[BlakeBstone]

Want to quite down you g30 without hotmelting or changing the sw. Here's you answer, just remove the weight put this under it and screw the weight back in

[NYCgolfer17]

Want to quite down you g30 without hotmelting or changing the sw. Here's you answer, just remove the weight put this under it and screw the weight back in

 

Interesting. Does it work as well as cotton/yarn?

[BlakeBstone]

Want to quite down you g30 without hotmelting or changing the sw. Here's you answer, just remove the weight put this under it and screw the weight back in

 

Interesting. Does it work as well as cotton/yarn?

No its not going to give you that solid thwack of cotton or hot melt but it definitely makes the sound less significant

[brent]

Remember, you can request hotmelting from Ping. Sound and feel will be improved with this.

[DNice26]

Want to quite down you g30 without hotmelting or changing the sw. Here's you answer, just remove the weight put this under it and screw the weight back in

 

Interesting. Does it work as well as cotton/yarn?

No its not going to give you that solid thwack of cotton or hot melt but it definitely makes the sound less significant

 

Nice....cheap and simple. Best part is....it has to be legal too right? As it is stuck in place......

[BlkNGld]

Want to quite down you g30 without hotmelting or changing the sw. Here's you answer, just remove the weight put this under it and screw the weight back in

 

Does that work with the existing screw?

[BlakeBstone]

Yes, it's only a 1/16" thick washer

[ccorrada]

[quote name='BlakeBstone' timestamp='1433179504' post='11667302']
Yes, it's only a 1/16" thick washer
[/quote]Great idea. I have also heard that a bit of lead tape in the right spot will quiet down any driver, you just move it around until you find the spot. I may try this. what type of wrench do you need to get the screw out?

[wobgon]

[quote name='ccorrada' timestamp='1433274368' post='11676516']
[quote name='BlakeBstone' timestamp='1433179504' post='11667302']
Yes, it's only a 1/16" thick washer
[/quote]Great idea. I have also heard that a bit of lead tape in the right spot will quiet down any driver, you just move it around until you find the spot. I may try this. what type of wrench do you need to get the screw out?
[/quote]
The same one you use to adjust the head.

[ccorrada]

[quote name='wobgon' timestamp='1433274480' post='11676526']
[quote name='ccorrada' timestamp='1433274368' post='11676516']
[quote name='BlakeBstone' timestamp='1433179504' post='11667302']
Yes, it's only a 1/16" thick washer
[/quote]Great idea. I have also heard that a bit of lead tape in the right spot will quiet down any driver, you just move it around until you find the spot. I may try this. what type of wrench do you need to get the screw out?
[/quote]
The same one you use to adjust the head.
[/quote]In that case I'm your huckleberry

[ccorrada]

Installed washer and AD-BB 6x. Will report back this afternoon.

[mulliganman30]

Where are you all finding somewhere that has all 3 G30 demo heads for a fitting? I've only been able to find a single course that has two of the heads (and of course they don't have the LS head for fitting). I'm in southwest Mo if it helps.

[roll - gybe]

This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.

[JasonPetermann]

[quote name='ccorrada' timestamp='1433338474' post='11680974']
Installed washer and AD-BB 6x. Will report back this afternoon.
[/quote]

And.....?

[animalgolfs]

[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]

Rapture

[ccorrada]

[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]Cally Diablo Edge Tour

[ccorrada]

[quote name='JasonPetermann' timestamp='1433472688' post='11692824']
[quote name='ccorrada' timestamp='1433338474' post='11680974']
Installed washer and AD-BB 6x. Will report back this afternoon.
[/quote]

And.....?
[/quote]Thanks for the bump. AD-BB could not beat out my Accra Tour Z. Not sure why and it wasn't bad at all, just not for me I guess. I'm actually going to be listing it on BST if anyone is interested shoot me a pm.

I'm really not sure why I'm doing the shaft tango because my current combo is awesome. I guess because I have a sickness. Yesterday I ordered two bargain shafts that I really really love to try in the head. AXE Xcaliber 6+ in stiff tipped 1/2" and Grafalloy Blue (the new reissue white one). If those don't kick the Accra out I'm done.

As for the washer, the one I installed was a smaller diameter and didn't do much. I picked up the size recommended above and will try that tomorrow.

[roll - gybe]

[quote name='animalgolfs' timestamp='1433474451' post='11692976']
[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]

Rapture
[/quote]

Yeah, I tried it and I got the weird topping problem with it like a few other guys here.

[ccorrada]

[quote name='roll - gybe' timestamp='1433510567' post='11694360']
[quote name='animalgolfs' timestamp='1433474451' post='11692976']
[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]

Rapture
[/quote]

Yeah, I tried it and I got the weird topping problem with it like a few other guys here.
[/quote]Me too. Topped a shot for the first time in 20 years and sold it immediately.

[ws6]

[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]

I get 2500 rpms out of a TEE CB4 with a Grafalloy Axis 95. I love that club.

[animalgolfs]

[quote name='roll - gybe' timestamp='1433510567' post='11694360']
[quote name='animalgolfs' timestamp='1433474451' post='11692976']
[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]

Rapture
[/quote]

Yeah, I tried it and I got the weird topping problem with it like a few other guys here.
[/quote]
I currently have Xgc7 fw's non beta. They are easy to hit, but I hit the G25 just as well, see no distance difference either.

I would assume the CB series TEE would be a very good idea for what your looking for then....

[Beavs17]

TEE CB5 with a Rogue Black 80....absolute money.
[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]

TEE CB5 with Rogue Black 80...great combo.

[fujiman.757]

Alrite fellas my clubfitter twisted my arm i have one of these g30 ls on the way with tour 65x shaft excited about puttig it in play

[bigdave91]

Been looking at this driver but might go get fit for a good shaft before I buy it. I think I have had my current driver too long(3 months) haha

[MiloMinderbnder]

Having a slight problem, hope someone can help: G30 LS Tec 10.5 and Tour 65x shaft. When I set the loft to - (.6 to 9.9 I guess) I can hear a small clicking sound sometimes in my backswing and sometimes in my downswing. It doesn't happen when set to neutral. Is the adapter not sitting right or is it it a problem with the head? Anyone else experienced this problem?

[ecblack21]

I tend to hook the ball with the driver. Which is better for a hook swing: G30 or G30SF?

[1puttTUT]

[quote name='roll - gybe' timestamp='1433471773' post='11692734']
This is the biggest improvement I have experienced since I bought a hogan hybrid in 2004.

Anyone find a tee shot 3 wood that adds as much low spin forgiveness? Yeah I'm getting greedy.
[/quote]

Adams super LS. I found one online brand new for $28 after my buddy kept raving about how awesome it was. Its super forgiving and I can hit it 270+