Xenon Putters: Share Your Pictures and Stories

[Rbel]

[quote name='Frozenghost007' timestamp='1415071140' post='10394031']
Here's a Copper TyeDye XeBlade I ordered from Lump. Big thanks to Ivan on this one for helping me out.
[/quote]

Beautiful, and he nailed the shape on that

[Bule1101]

New Signature Face Milling

Some cool inserts as well

[nosil]

Saw this putter was available and was fortunate to be able to purchase. The putter looks nice in the pictures, but looks much better in person. Can't wait for the snow to melt so I can try it on a real green. First copper putter I have tried, and the feel is great.

[attachment=2646461:IMG_00871 (Medium).jpg]
[attachment=2646463:IMG_00891 (Medium).jpg]

[Bule1101]

Here is a new FlatTop

[Bule1101]

Lefty Love

[RobClarke]

Time to get this thread going again.... Chopped sound slot

[attachment=3034244:AlBzback.jpg][attachment=3034248:AlBzface.jpg]

[RobClarke]

Karbon Blue torch

[attachment=3034258:KarbonElement.jpg][attachment=3034262:KarbonElementface.jpg]

[RobClarke]

Stainless Steel Kurve

[attachment=3034274:SSKurveOaktree.JPG][attachment=3034278:SSKurveFace.JPG]

[PeanutsDaddy]

I purchased these two beauties from a fellow WRXer/PT member and had them sent to Lump for a few modifications. So pleased with the results.

ALBZ Manta:

[attachment=3040666:Xenon Manta 3.JPG]

[attachment=3040670:Xenon Manta 2.JPG]

Brass 'Cowboy':

[attachment=3040672:Xenon Brass Cowboy 4.JPG]

[attachment=3040660:Xenon Brass Cowboy 2.JPG]

Also added this Kopper Kurve over the summer. The pre-aged finished is stunning in person. It's a bit difficult to see in the photo but there's a maple leaf near the toe of the putter face. Really 'pops' in the sunlight.

[attachment=3040674:Xenon 1.png]

[attachment=3040676:Xenon 3.png]

I've really enjoyed working with Lumpy. A true craftsman and gentleman.

Mike.

[Timastyle]

Here's my latest acquisition...an early CNC model of Lump's. Gave him specs and a couple things I wanted (i.e. softened bumpers, invisi-plumber's neck) and the rest was up to him. This is the end product that just arrived at my door. Excited to give it a roll!

[attachment=3044976:1125151140a.jpg]
[attachment=3044974:1125151141a.jpg]
[attachment=3044972:1125151141b.jpg]
[attachment=3044978:1125151140.jpg]

[cardoustie]

OK I am going to contact them on a better Piretti Matera custom. Love a wide flange and a flow neck. Do some outside weights and a damascus insert on nickel and I am good to go

[PeanutsDaddy]

[quote name='cardoustie' timestamp='1448488312' post='12646266']
OK I am going to contact them on a better Piretti Matera custom. Love a wide flange and a flow neck. Do some outside weights and a damascus insert on nickel and I am good to go
[/quote]

By them, you mean him ; )

Cardy, from what I've seen, and purchased, I'd be shocked if Lump can't bring your vision to life. His Thru-sert is quite a sight.

[cardoustie]

[quote name='PeanutsDaddy' timestamp='1448488782' post='12646312']
[quote name='cardoustie' timestamp='1448488312' post='12646266']
OK I am going to contact them on a better Piretti Matera custom. Love a wide flange and a flow neck. Do some outside weights and a damascus insert on nickel and I am good to go
[/quote]

By them, you mean him ; )

Cardy, from what I've seen, and purchased, I'd be shocked if Lump can't bring your vision to life. His Thru-sert is quite a sight.
[/quote]

My list of requests is a little OCD ... let's see what he comes back with
I have to work in a black shaft and my university colours for paintfill etc as well of course

[PeanutsDaddy]

[quote name='cardoustie' timestamp='1448490070' post='12646412']
[quote name='PeanutsDaddy' timestamp='1448488782' post='12646312']
[quote name='cardoustie' timestamp='1448488312' post='12646266']
OK I am going to contact them on a better Piretti Matera custom. Love a wide flange and a flow neck. Do some outside weights and a damascus insert on nickel and I am good to go
[/quote]

By them, you mean him ; )

Cardy, from what I've seen, and purchased, I'd be shocked if Lump can't bring your vision to life. His Thru-sert is quite a sight.
[/quote]

My list of requests is a little OCD ... let's see what he comes back with
I have to work in a black shaft and my university colours for paintfill etc as well of course
[/quote]

I asked for a Canadian stamp and he didn't have one in the arsenal at the time. He purchased one and added a personal touch to my most recent purchase.

Look forward to following your progress.

Let's hope for a mild winter so we can roll out beauties on real turf.

[RobClarke]

[quote name='cardoustie' timestamp='1448488312' post='12646266']
OK I am going to contact them on a better Piretti Matera custom. Love a wide flange and a flow neck. Do some outside weights and a damascus insert on nickel and I am good to go
[/quote]

The Matera is a descendant of the TP Mills Fleetwood design. Take a look at that for a reference.
RC

[cardoustie]

Sent an email but no reply

[XenonGolf]

[quote name='cardoustie' timestamp='1449103686' post='12673584']
Sent an email but no reply
[/quote]

[email="[email protected]"][email protected][/email]

I am currently not receiving emails from my website for whatever reason.

Lump

[cardoustie]

Lump - I resent to the new addy above .. thx for letting me know GC

[RobClarke]

Karbon Kurve- This one has a history...

[attachment=3084376:KarbonkUrve1.JPG][attachment=3084378:KarbonkUrve2.JPG]

[dronell19]

Here's one Lump finished for me recently. LOVE this one.

[Leftymoose]

This hasn't found it's way to me yet....been a long wait, but looking forward to it's arrival. Created from a sketch I sent him.

[PeanutsDaddy]

The whole 'kitchen sink' has been thrown into your Kustom Lefty. I like everything about the head.

[Leftymoose]

The putter was delivered today. It looks even better in person. Feels great

[WVP]

Looks good Leftymoose. Pretty cool that we can sketch up whatever is in our heads and get it made like that.

[Leftymoose]

Looks good Leftymoose. Pretty cool that we can sketch up whatever is in our heads and get it made like that.

 

I have tons of putter sketches I've drawn up that I would love to have made with my specs. Unfortunately cash flow is the main issue, haha

[Timastyle]

Here's my latest acquisition...Damascus Stainless handmade.

 

 

 

 

 

 

 

[5hort5tuff]

Lump had a 2 piece idea that sounded pretty sick at around 2" wide as well that should be made.

 

 

 

It is almost getting to the point of too many options available with Xenon.

 

I feel like unlimited is more like it...

[WVP]

Tima, that is awesome.

[Timastyle]

Thanks WVP! I'm anxiously waiting for it's arrival.

[PeanutsDaddy]

Holy guacamole Tima. Unbelievably cool. The 'grain' really pops with the contrasting patterns. Also fond of the simple stamping and tool.

 

I'd love to see a beefier version of this head shape with a wider flange and thicker top-line. I want to roll and anser sized putter (and really like my Kurve) but results seem to be better with a mid-mallet and mallet.