GolfWRX Giveaway! Custom $2,000+ Damascus Steel MACHINE Putter! Enter Here!

[Twohey]

Left Hand
M2A Converter (with Heavy Blade Back)
Half Offset Goose Neck
Damascus Medallion
No Paint Fill
4* loft / 69* lie / 31.5" length
Reverse Arch Grip
Aggressive VMG
Hand Torched Oil Quench finish

Thanks!

[JLew]

Great giveaway!

M2A Blade Back
Plumber Neck (Medium)
Hand Torched Oil Quenched
35"
RH
Standard Lie/Loft (3/71)

[H4CK]

[b] [size=4]MACHINE Putter M20 Converter with Half Offset Goose Neck[/size][/b]

34" Tapered shaft with customized Black Chrome look if possible
Dot sight marker with no lines
Oil quenched finish
Dog and Ball Logo
Damascus Steel or Mokume Gane Medallion
Leather stichback grip with either white or red stitches.
Std Specs

Custom initialing. Small first letter with larger second letter to be filled in possible white or red depending on the grip.

[bradkv]

M10 Fixer. Oil Quench Hand Torched finish with a deep milled face, no sight line or dot. 33.5" in length, 3* loft, 70* lie. "Neely" and "Taylor" stamped on the sole, "BWV" stamped on the toe/face of the putter. True Temper stepped steel shaft, with a SuperStroke Mid Black grip. 360 or so head weight. Keeping my fingers crossed.....

[feedlotdoc]

WOW!!!! I want the M10, with a 3/4 offset goose neck, maybe twisted... 36", 350 gram. I honestly don't know what I want, but that's a good start. Thanks Machine & WRX!!

[OK_Golf]

M2A
Hand bend hosel (medium)
Heavy fat back
Hand torched oil quenched (is is possible to get a greenish tint instead of blue-ish?)
with a bear paw alignment "dot"

Thanks GolfWrx and thanks Machine. What a cool giveaway.

[DocChoi]

I WANT AN ----- Official Red Ryder Carbine-Action Two-Hundred-Shot Range Model Air Rifle with a compass in the stock (and this thing which tells time)

Er i mean ehhh
M9 converter, damascus steel, stubby square cut plumber's neck, hand torched oil quenched finish, 34 inches.
Thanks

[99andaflake]

awesome giveaway - thanks for including the internationals!

M20 converter - half offset goose neck - hot salts gun metal blue. Engraved with 'Go Ball' with the dog logo somewhere! Standard loft and Lie. 33.5 inches. Superstroke 1.0.

Boom!

[MHLY01]

Anser style, 33", 69" lie, 3' loft, red iomic grip, half gooseneck, hand torched oil, no paintfill/site dot, etc., 350g.

[is76550]

Well this has to be one of the coolest giveaways ever! thanks to Dave and Chris and the entire Machine team for making this happen and to GolfWRX for having a place to do this.

If I were to lay one out there I would go with a M2A Converter in Damascus Steel acid etched finish, with Nibble Cut Fat Back and a modular shaft over center shaft Hosel. I would have a sight line and a Damascus medallion.

[Elman1211]

MACHINE PUTTER M2A - LONG PLUMBER NECK - FAT BACK. Sight line. 34.25". Stingray grip master grip. "1211" stamped diagonally on the heel corner of the sole.

Acid etch.

Can the plumbers neck be twisted or made from a braided cable? I think that might look cool. Or the neck be slotted? Would be cool if the sole could be riveted? Lol. Maybe? Getting a little too crazy with this one.

Hope I win!

[ScottyMCN]

[b]
[url="http://machineputters.gostorego.com/products/machine-putter-m2a-4pt0-plumber-neck-blade-back-321.html"]MACHINE Putter M2A with Half Offset Plumbers Neck[/url] Acid Etch! 33"[/b]

[Z3R013]

Custom M10 Adjuster with hand grounded toe and heel (so it isn't quite a mini but shorter than the M10 head). Site dot. Vertical mill grooves. Machine cavity with hand stamped "PROTO" with DLR dog on sole. Short plumber neck. 357g head. Antique charcoal rainbow finish. 34". Smoke shaft.

Ahhh perfect!

[HIRO.G]

[b]
MACHINE PUTTER 4.0 M2A - PLUMBER NECK - BLADE BACK - DAMASCUS STEEL 33" std loft and lie any grip any shaft. awesome![/b]

[Goldenhawk]

M2a blade back with plumbers neck, 33.5" long.

[Keen]

M2A Beefy back, hand bent hosel medium (twisted?), skull sight alignment. Acid etched. 34'' shaft.

[MMB1500]

Wow, what a giveaway. Thanks guys.

OK here goes...

M1A Adjuster
1/2 Offset Dot Pill Cut Plumber Neck
Hand Torch Oil Quench Finish
VMG Face milling
Pill Cut Cavity with 'Machine' engraved in rear (no medallion).
Sight Dot
Iomic Midsize Black
Black Machine Tour Headcover

[MRT6893]

[size="4"]Hand Torched Oil Quenched[/size]



[b] Machine Putter M2A - Plumber Neck - Beefy Back right hand 35 inches with aero tech steel fiber shaft lamkin3 gen grip standard loft and angle[/b]

[Bob Cat]

[b][color="#000000"]head style[/color][/b]
[color="#000000"]M4 Meritage w/ Deep Bongo Back Pill Cut Tongue, Melted (Right Hand)[/color]

[b][color="#000000"]neck[/color][/b]
[color="#000000"]Double Bend Shaft Over Stud[/color]

[b][color="#000000"]finish[/color][/b]
[color="#000000"]Acid Etch[/color]

[b][color="#000000"]custom work[/color][/b]
[color="#000000"][color="#000000"]Copper MACHINE Logo Medallion[/color][/color]

[b][color="#000000"]specifications[/color][/b]
[color="#000000"]Stock MACHINE Lamkin Grip[/color]
[color="#000000"]3 Deg Loft[/color]
[color="#000000"]Std Lie[/color]
[color="#000000"]34" Length[/color]
[color="#000000"]Heavier Weight (can adjust later)[/color]

[color="#000000"]GREAT gesture, guys... THANKS![/color]

[jones137]

M9 with full offset gooseneck, Hand torch oil quench finish, Mokume Gane Medallion with Dog & Ball Logo, White Paintfill with a Sight Dot, Aerotech Steel Fiber Shaft, Gripmaster Chocolate Deer Grip, 35", 3* Loft, 70* Lie, VMG Face milling.

Man that would be awesome.

[OzzDOA]

M2A with half offset goose neck, TMG-16 grooves, 33", standard lie and loft 380 grams. SuperStroke Mid-Slim grip with taper shaft. Bronze insert, white paintfill, hand torched and oil quenched finish.

[Titleistman1010]

M2A Plummer Neck Blade Back in acid finish. I hit this putter at the Haggin Oaks Demo Day with the Bone finish and it was amazing! Would love to game one of these!
Thanks

[bigmoneyp]

This is my absolute dream putter.... EXACTLY LIKE THIS! PICK ME!

 

[Darth_Blader]

M2A Converter
Modular Center Over Shaft over
Fat Back Flange
Acid etched finish
33.5" Length, Aerotech shaft, Machine Grip
69* lie
3* loft

[gr8blueheronbird]

M20 Converter with Modular center over shaft-over. Hand Torched oil quenched. 34 inches with salty putter grip

[1iron]

M2A Converter Heavy back
Right Hand
short plumbers neck
Oil quenched
33.25"
4* loft
69* lie
Dog and Ball engraved on Black anodized aluminum
white paint fill
Old school "HOG" cover!

[RonSwanson]

M20 converter.

Not sure of the name here as I didn't see it on the Machine site. But this flange

[attachment=1883359:post-8942-0-47384200-1379534552_thumb.jpg]

Square cut plumbers hosel.

High contrast finish shown here:

[attachment=1883361:post-14457-0-81112900-1379634433_thumb.jpg]

34.5". 360g head weight.

[Haymaker]

MACHINE PUTTER M20 CONVERTER WITH SINGLE BEND SHAFT OVER STUD

35"
67°/4°

[teaitup]

Wow I hope I win this giveaway! I would like to take the machine putter in a m2a shaft over stud beefy back. In a hot salts gun metal bluefinish that I do care about..The grip would be a lampkin 3gen with the machine logo on it.It will have a standard loft and lie.I would put a 35 inch shaft in it.

[Gamble Gamble]

[b] [url="http://machineputters.gostorego.com/products/machine-putter-m2a-modular-center-shaft-over-heavy-fat-back.html"]MACHINE PUTTER M2A - MODULAR CENTER SHAFT OVER - HEAVY FAT BACK[/url] - Right handed - 71* lie 3* loft - machine logo[/b]


Hand torched oil quenched finish with white or powder blue paintfill - Machine Lamkin grip