APPLY: Fujikura Evo IV Fitting at Club Champion! 5 Members Wanted! Apply Here!

[Crowman]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)- Callaway Epic SZ 10.5 Diamana white board 70s

Driver Swing Speed- 100-103

What are your goals to improve your driving? I would like to see more distance and a lower launch to cheat this Oklahoma wind

Have you ever been custom fit before?-No

Indicate the Club Champion location you'd visit for the fitting- Dallas

[Bdmac79]

- Titleist 917D2 9.5 set at B1, 45 inches, with GD AD-IZ 6s

- 100-103

- Increase distance and accuracy

- No

- Woodridge, IL or Chicago

[CRider]

Current Driver: Titleist 913 D2 9.5 degrees. Set at A1. Diamana S+62 R flex shaft, 45".

Swingspeed: 90

Looking for more consistency hitting center of face and more distance.

Have been to a custom fitting once before for current driver quite a few years ago.

I'd do it at the Boston area store (Needham).

[EamoBricko]

- Ping G 10.5 (set at standard), Fuji Motore Speeder 661 S, 44"

- 96

- Increase distance and accuracy (what else?!)

- Yes, at Club Champion

- Long Island

[dave willie]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)
  
• Titleist 917D3 10.5 degree (set at 11.25), Diamana Blue Ltd. 70-S, 44.5"
  

• Driver Swing Speed
  
• 95-99 mph
  

• What are your goals to improve your driving?
  
• A bit higher launch
  

• Have you ever been custom fit before?
  
• Yes (for last several drivers and current irons)
  

• Indicate the Club Champion location you'd visit for the fitting
  
• Bellevue, WA
  

[Downtown_Brown_41]

M1 10.5 w/ Aldila Synergy Proto

 

118

 

Tighter dispersion

 

No

 

Atlanta, Ga

[Scooterboy59]

And the winners are? So I can be jealous.

[davo32683]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) - Ping G400 LST 8.5° Tour AD TP-6X @ 45"

 

Driver Swing Speed - 110-115

 

What are your goals to improve your driving? - More consistent results and taking the right side out of play

 

Have you ever been custom fit before? - No

 

Indicate the Club Champion location you'd visit for the fitting - Charlotte, NC

[endy]

Current Driver & Shaft Details: M1 440 9.5* w/ KK DC 70TX @ 45”

Driver Swing Speed: 125

What are your goals to improve your driving? More consistency/accuracy

Have you ever been custom fit before? No

Location: Minneapolis

[WeDrewStraws_CameIn3rd]

• Current Driver & Shaft Details: Callaway Epic Sub Zero, UST Attas 5 GoGo 6s, 1/2" tipped, plays at 44.75"
  
• Driver Swing Speed: 108-110 mph
  
• What are your goals to improve your driving: Overall accuracy without distance loss, higher launch without a spin increase
  
• Have you ever been custom fit before: yes
  
• Indicate the Club Champion location you'd visit for the fitting: Seattle, WA
  

[bvmagic]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) TV Sldr 9.5 with fujikura atmos blue 6S. 45 inches. square face with fade weight setting.

Driver Swing Speed 95 mph

What are your goals to improve your driving? consistent shot shape

Have you ever been custom fit before? Yes

Indicate the Club Champion location you'd visit for the fitting Orlando.

[EaglesGolf99]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)

 

A-Grind Classic 350 10.5° w/Mitsubishi Rayon Diamana Kai'li 80x5ct X Flex

 

Driver Swing Speed

 

110mph

 

What are your goals to improve your driving?

 

Take out the left side of the golf course

 

Have you ever been custom fit before?

 

Yes

 

Indicate the Club Champion location you'd visit for the fitting

 

Boston, MA

[TaderSalad]

• Ping G400 LST set to 9.5 w/ Matrix Ozik White Tie in stiff flex
  
• 102-105
  
• Shape shots, Accuracy, and little more distance.
  
• No
  
• Houston, TX
  

[cali_catalyst]

§ Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)

• M1 440 8.5 – 45” – Mamba 80tx
  
• However… was fit today at ClubChamp for a GBB Epic w/ Evo II 757x… I have some choices to consider :)
  

§ Driver Swing Speed

• 113-116
  

§ What are your goals to improve your driving?

• Tighten dispersion, little higher launch and longer carry… little less spin. Not to have a shaft that feels loose if I want to go after it.
  

§ Have you ever been custom fit before?

• Yes, today.
  

§ Indicate the

Club

Champion location you'd visit for the fitting

• Seattle (Bellevue)
  

[BILLYMALOOLY]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) callaway epic,

  hzrdus

  , siff, stock settings
  

• Driver Swing Speed---101-103
  
• What are your goals to improve your driving?----- hit further
  
• Have you ever been custom fit before?--- no sir,
  
• Indicate the Club Champion location you'd visit for the fitting ( minn.
  

[the_saint_siwa]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) Ping G400 9.5 with stock Alta CB stiff flex. 45.5 inches. Neutral setting.

Driver Swing Speed 100-105 mph

What are your goals to improve your driving? Tightening dispersion.

Have you ever been custom fit before? Yes

Indicate the Club Champion location you'd visit for the fitting: Charlotte, NC.

[jdawgttu]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) : Taylormade M1 440 9.5* w/Kuro Kage TiNi Dual Core 60x @ 44.75" or Ping G LS Tec 10.5* w/ Fujikura 6.2x Tour Spec @ 45"
  
• Driver Swing Speed: ~110mph
  
• What are your goals to improve your driving? Accuracy and consistency.
  
• Have you ever been custom fit before? No
  
• Indicate the Club Champion location you'd visit for the fitting: Dallas, TX
  

[timmy8151]

• Current Driver & Shaft Details: Taylormade M2 & Aldila Rip'd NV65 Stiff
  
• Driver Swing Speed: 95 mph
  
• What are your goals to improve your driving? Accuracy. Currently fighting a double cross and would like to be able to paly away from my misses
  
• Have you ever been custom fit before? Yes
  
• Location: San Francisco, CA
  

[ago33]

Callaway epic sub zero with fubuki j 70 x

 

Swing speed was 116-117 on course. On a monitor I could get it up to 122.

 

I’ve had a few swing changes so the shaft doesn’t flex right in my swing and it kicks a little too much.

 

Yes, I was fit for my last one by club champion. My fitter was amazing and he dialed it in.

 

Downtown chicago

[BewareTheGlowball]

HOW TO APPLY

In a post below, include the following...

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) Callaway Epic SZ 9.0, standard face and loft, Oban Tour Limited 60s playing at 45"
  
• Driver Swing Speed 115 +/-
  
• What are your goals to improve your driving? keeping the ball in play while getting the most out of my driver.
  
• Have you ever been custom fit before? Once other than just stock shaft fitting with new club purchase.
  
• Indicate the Club Champion location you'd visit for the fitting (Search here for your nearest Club Champion location) Orlando, Florida
  

[THT28]

• Current setup - Titleist 915 D3 9.5 degree with a MRC Tensei Pro White 60-TX
  
• Swing speed - usually between 105 and 110 mph
  
• Goals - mostly accuracy as I've really been struggling with this lately
  
• I have NOT ever been custom fit for a driver before as I tend to be a bit of a shaft-oid
  
• I live in Houston, TX so I would visit the location on the west side of Houston
  

[changelines]

 

Fujikura is offering the opportunity for 5 GolfWRX members to be properly fit for and review the Speeder Evolution IV shaft. They've partnered with Club Champion, a Golf Digest Top 100 fitting company, with their 26 locations throughout the US to ensure a proper fit. The winners of this contest will experience a top-notch driver fitting by one of Club Champion’s trained fitting experts. Important Note: If the Speeder Evolution IV is not a proper fit as determined by the club fitter, you will be properly fit into another one of Fujikura’s many offerings.

 

Want to be part of this amazing Fujikura Shaft and Club Champion Fitting and Review? Read how to apply below.

 

ABOUT THE FUJIKURA SPEEDER EVOLUTION IV

The newest in a long line of Speeders, the Speeder Evolution IV, is developed with the most advanced technologies in the graphite shaft industry. Building on the performance, engineering and material integrations of the Evo II and Evo III, the Evo IV sets the new standard. The IV is based on the profile of the II (low launch and low spin), but has a slightly softer mid to tip section to increase launch angle while maintaining low torque and spin with added high-strength materials.

 

The materials and engineering processes that make up the IV are more advanced than any Speeder that came before. New technologies include a new High-performance intermediate modulus 70-ton material, for lightweight stability and a new “Engineered Outer Bias Technology” that creates smoother loading feel. Technologies that carry over from previous Evolution shafts include MCT (Metal Composite Technology), 90 Ton Carbon Fiber for ultra-lightweight stability and Maximum Carbon Fiber Content (MCFC) pre-preg material.

 

The IV has a full-length 3D printed Black/Silver gradient cosmetic to compliment the gold decal. Available in weight ranges from 56 to 77 grams (569, 661, 757) and in flexes starting at SR (R2) up to X. $400 MSRP.

 

HOW TO APPLY

In a post below, include the following...

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)
  
• Driver Swing Speed
  
• What are your goals to improve your driving?
  
• Have you ever been custom fit before?
  
• Indicate the Club Champion location you'd visit for the fitting (Search here for your nearest Club Champion location)
  

Testers chosen and notified via PM within 7 days. Good luck!

 

 

WHAT WE ASK

 

If chosen, we request a full review on both the fitting experience and the Fujikura shaft you are properly fit into. You will be required to participate in an Official Review Thread on GolfWRX, including observations and photos.

 

NOTE: You are responsible for transportation to and from your nearest Club Champion location.

 

 

Fujikura is offering the opportunity for 5 GolfWRX members to be properly fit for and review the Speeder Evolution IV shaft. They've partnered with Club Champion, a Golf Digest Top 100 fitting company, with their 26 locations throughout the US to ensure a proper fit. The winners of this contest will experience a top-notch driver fitting by one of Club Champion’s trained fitting experts. Important Note: If the Speeder Evolution IV is not a proper fit as determined by the club fitter, you will be properly fit into another one of Fujikura’s many offerings.

 

Want to be part of this amazing Fujikura Shaft and Club Champion Fitting and Review? Read how to apply below.

 

ABOUT THE FUJIKURA SPEEDER EVOLUTION IV

The newest in a long line of Speeders, the Speeder Evolution IV, is developed with the most advanced technologies in the graphite shaft industry. Building on the performance, engineering and material integrations of the Evo II and Evo III, the Evo IV sets the new standard. The IV is based on the profile of the II (low launch and low spin), but has a slightly softer mid to tip section to increase launch angle while maintaining low torque and spin with added high-strength materials.

 

The materials and engineering processes that make up the IV are more advanced than any Speeder that came before. New technologies include a new High-performance intermediate modulus 70-ton material, for lightweight stability and a new “Engineered Outer Bias Technology” that creates smoother loading feel. Technologies that carry over from previous Evolution shafts include MCT (Metal Composite Technology), 90 Ton Carbon Fiber for ultra-lightweight stability and Maximum Carbon Fiber Content (MCFC) pre-preg material.

 

The IV has a full-length 3D printed Black/Silver gradient cosmetic to compliment the gold decal. Available in weight ranges from 56 to 77 grams (569, 661, 757) and in flexes starting at SR (R2) up to X. $400 MSRP.

 

HOW TO APPLY

In a post below, include the following...

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)
  
• Driver Swing Speed
  
• What are your goals to improve your driving?
  
• Have you ever been custom fit before?
  
• Indicate the Club Champion location you'd visit for the fitting (Search here for your nearest Club Champion location)
  

Testers chosen and notified via PM within 7 days. Good luck!

 

 

WHAT WE ASK

 

If chosen, we request a full review on both the fitting experience and the Fujikura shaft you are properly fit into. You will be required to participate in an Official Review Thread on GolfWRX, including observations and photos.

 

NOTE: You are responsible for transportation to and from your nearest Club Champion location.

 

Fujikura is offering the opportunity for 5 GolfWRX members to be properly fit for and review the Speeder Evolution IV shaft. They've partnered with Club Champion, a Golf Digest Top 100 fitting company, with their 26 locations throughout the US to ensure a proper fit. The winners of this contest will experience a top-notch driver fitting by one of Club Champion’s trained fitting experts. Important Note: If the Speeder Evolution IV is not a proper fit as determined by the club fitter, you will be properly fit into another one of Fujikura’s many offerings.

 

Want to be part of this amazing Fujikura Shaft and Club Champion Fitting and Review? Read how to apply below.

 

ABOUT THE FUJIKURA SPEEDER EVOLUTION IV

The newest in a long line of Speeders, the Speeder Evolution IV, is developed with the most advanced technologies in the graphite shaft industry. Building on the performance, engineering and material integrations of the Evo II and Evo III, the Evo IV sets the new standard. The IV is based on the profile of the II (low launch and low spin), but has a slightly softer mid to tip section to increase launch angle while maintaining low torque and spin with added high-strength materials.

 

The materials and engineering processes that make up the IV are more advanced than any Speeder that came before. New technologies include a new High-performance intermediate modulus 70-ton material, for lightweight stability and a new “Engineered Outer Bias Technology” that creates smoother loading feel. Technologies that carry over from previous Evolution shafts include MCT (Metal Composite Technology), 90 Ton Carbon Fiber for ultra-lightweight stability and Maximum Carbon Fiber Content (MCFC) pre-preg material.

 

The IV has a full-length 3D printed Black/Silver gradient cosmetic to compliment the gold decal. Available in weight ranges from 56 to 77 grams (569, 661, 757) and in flexes starting at SR (R2) up to X. $400 MSRP.

 

HOW TO APPLY

In a post below, include the following...

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)
  
• Driver Swing Speed
  
• What are your goals to improve your driving?
  
• Have you ever been custom fit before?
  
• Indicate the Club Champion location you'd visit for the fitting (Search here for your nearest Club Champion location)
  

Testers chosen and notified via PM within 7 days. Good luck!

 

 

WHAT WE ASK

 

If chosen, we request a full review on both the fitting experience and the Fujikura shaft you are properly fit into. You will be required to participate in an Official Review Thread on GolfWRX, including observations and photos.

 

NOTE: You are responsible for transportation to and from your nearest Club Champion location.

[changelines]

Current Driver setup——— Ping G30 44 1/2 Fubuki X60 stiff shaft loft 10.5*

Swing Speed——— 98 mph

Goals——— improved and more consistent higher ball flight

Custom fitted——— yes several times both in the USA and Canada in the US fitter was Bob VanSweden in Canada a pro working at Golftown big box store

Location ——— Orlando Florida.

[McMoo]

Current Driver & Shaft Details: Epic sub zero 9 degree - fujikura pro green 62 x stiff

Driver Swing Speed: 105-108

What are your goals to improve your driving? Hit more fairways.

Have you ever been custom fit before? Yes

Location: Creve Coeur, MO

[YoYoJumbo]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) - Callaway GBB Epic - weight straight back - Tour AD TP 6X - 45'
  
• Driver Swing Speed - 105-110
  
• What are your goals to improve your driving? More consistency, getting rid of the hook
  
• Have you ever been custom fit before? Not with the driver
  
• Indicate the Club Champion location you'd visit for the fitting Charlotte, NC
  

[azkaevolution]

• Current Driver & Shaft Details: Callaway GBB 10.5* with KK TiNi Black 50g R at 44.5"
  
• Driver Swing Speed: 90-95ish
  
• What are your goals to improve your driving? Consistency of strike and increasing distance - golf is a lot more fun when it's a 7i or less into the green, instead of a long iron or a hack out of the crap
  
• Have you ever been custom fit before? No
  
• Location: Hackensack, NJ
  

[Swoff57]

Current Driver: TM M1 ‘17 with project x evenflow black 75 xstiff

Swing speed: 115ish

What I want to fix: accuracy, I would love to eliminate the right side of the course and be more consistently in the fairway.

Ever be pro fit: No

Location: Washougal WA

 

Current Driver: TM M1 ‘17 with project x evenflow black 75 xstiff

Swing speed: 115ish

What I want to fix: accuracy, I would love to eliminate the right side of the course and be more consistently in the fairway.

Ever be pro fit: No

Location: Washougal WA

[jjr]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) Ping G LST, 9.5 Alta 55, 45" Stiff
  
• Driver Swing Speed- 100
  
• What are your goals to improve your driving? Obtain more length, loose my occasional push/cut
  
• Have you ever been custom fit before? Yes Ping Phoenix
  

Thank you

[DesertRain]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)- Ping G400 9 degree 44.75" Aldila X-torsion copper 60S

Driver Swing Speed- 100 +/-

What are your goals to improve your driving? More consistency with ball flight

Have you ever been custom fit before?-No

Indicate the Club Champion location you'd visit for the fitting- Denver

[cane700]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) - Taylormade 2017 M2 9.5 degree set to 8.75. Diamana S+ 60 S flex at 44.5in

 

Driver Swing Speed: 104ish

 

What are your goals to improve your driving? Improve dispersion with the M2

 

Have you ever been custom fit before?

 

Indicate the Club Champion location you'd visit for the fitting (Search here for your nearest Club Champion location)- Willowbrook