Tour Edge Exotics C723 and E723 Drivers - In Hand Photos

[GolfWRX_Official]

C723

 

E723

[ShortSticks]

Thanks for the pics. I am going to give the E723 a try. I mean with a 30 day money back guarantee and lifetime warranty, what have I got to lose. This one looks much better than the last one and with a MOI rating over 5600 plus 10 yard left and right adjustability it should be able to give my Gamer (PING G400 MAX) a run for the top spot in the bag.

 

I have had a few of their fairway woods that have all been great and still play a XCG7Beta 3 wood from time to time. Here is hoping they have a driver that is as good as their fairways.

 

[ChadL]

8* head this year in the C series.  May have to try one just to see.  I really enjoyed my C721 driver.

[jeffrey r]

1 hour ago, ShortSticks said:

Thanks for the pics. I am going to give the E723 a try. I mean with a 30 day money back guarantee and lifetime warranty, what have I got to lose. This one looks much better than the last one and with a MOI rating over 5600 plus 10 yard left and right adjustability it should be able to give my Gamer (PING G400 MAX) a run for the top spot in the bag.

 

I have had a few of their fairway woods that have all been great and still play a XCG7Beta 3 wood from time to time. Here is hoping they have a driver that is as good as their fairways.

 

 

I recently picked up a pre-owned E722 driver from Tour Edge's shop for $160, and it is darn good in limited testing thus far.  It came with the Ventus Red 6S, which works much better for me than the Ventus Blue 6S I had from an earlier TE driver. 

 

Could totally play the E722, but will need to give it some testing once the weather warms up.  It needs to beat my Ping stalwarts (G430 Max, G425 Max and G400 Max).  Would love to try out the E723 with the extra adjustability.

[hartman29]

Look great. Any pics of the fairways yet?

[golfinbrad]

I gamed the C722 last year and it has been awesome.  Super straight.  I hope to test the C723 to see if it produces a little less spin than the C722.  Really like the adjustable weight design.  Tour Edge continues to make quality wood and hybrids.

[GolfWRX_Official]

On 3/14/2023 at 12:53 PM, hartman29 said:

Look great. Any pics of the fairways yet?

 

Here you go!

 

 

[burge]

The driver looks good as a whole, but the alignment aid of 723 with the lines on top and bottom, as compared with the non-carbon portion going back, gives the illusion of being a little crooked.  I think they should have used something else or at least dropped the straight lines.

[southpaw72]

Wish they offered lower lofts for lefty’s. I have a c721 I love but I would love more in a 9

[bekgolf]

On 3/14/2023 at 9:56 AM, golfinbrad said:

I gamed the C722 last year and it has been awesome.  Super straight.  I hope to test the C723 to see if it produces a little less spin than the C722.  Really like the adjustable weight design.  Tour Edge continues to make quality wood and hybrids.

 

I purchased a C721 driver through the Tour Edge Exotics Certified Pre Owned program late last year.  It's the most forgiving driver I've ever owned.  I've since bought more clubs from them and I am amazed at how well they work.  I'm also impressed with the pricing and 30 day return policy.

 

I'm wondering how they have flown below the radar for so long?  Quality shafts combined with quality heads with up to date technology at an affordable price is something unheard of in golf equipment these days.  The 723 series is one I'm looking forward to trying but it's going to take something special to kick the C721 out. 

[golfinbrad]

3 minutes ago, bekgolf said:

 

I purchased a C721 driver through the Tour Edge Exotics Certified Pre Owned program late last year.  It's the most forgiving driver I've ever owned.  I've since bought more clubs from them and I am amazed at how well they work.  I'm also impressed with the pricing and 30 day return policy.

 

I'm wondering how they have flown below the radar for so long?  Quality shafts combined with quality heads with up to date technology at an affordable price is something unheard of in golf equipment these days.  The 723 series is one I'm looking forward to trying but it's going to take something special to kick the C721 out. 

Marketing and PGA Tour presence.  There are several other quality clubs that are similar.  I also like they are made in the USA and give back to the military.  

[MtlJeff]

4 hours ago, burge said:

The driver looks good as a whole, but the alignment aid of 723 with the lines on top and bottom, as compared with the non-carbon portion going back, gives the illusion of being a little crooked.  I think they should have used something else or at least dropped the straight lines.

 

the 722 family 100% looks crooked. It's actually a little weird. A bit reminiscent of the old Diablo 3-wood that was angled closed. 

 

That being said it's not entirely unappealing. The 723 looks very similar

 

I just ordered a C723 hybrid. They look pretty sexy in the pics, we shall see!

[Greenie]

Has anyone tried the E723 driver?

I am curious about the rear weight adjustability. Does adjusting the weight say to a draw actually give you a draw with your normal swing?

 

I am playing the C721 driver and it has been the straightest driver I have ever played. My normal shot with most drivers (always Cobra until the C721) has been straight to a slight draw. With the C721 I lost my draw shot. I can fade it if I want to but I can't seem to make it draw on any of the settings or with my swing. I'm not complaining about hitting a straight ball. 

 

I am curious about the effects of the rear weight. I have seen a few reviews on the E723 but no one has gone into changing the rear weight settings and how it affects the results. I guess what I am asking is I was able to use the settings on the adapter of my C721 to get a straight ball. If you use the shaft adapter of the E723 to get a straight ball, would turning the weight on the rear to a draw setting turn that into a draw or is it a matter of using all the adjustments to hit a straight ball which the C721 does great with only using the shaft adapter?

[ShortSticks]

1 hour ago, Greenie said:

Has anyone tried the E723 driver?

I am curious about the rear weight adjustability. Does adjusting the weight say to a draw actually give you a draw with your normal swing?

 

I am playing the C721 driver and it has been the straightest driver I have ever played. My normal shot with most drivers (always Cobra until the C721) has been straight to a slight draw. With the C721 I lost my draw shot. I can fade it if I want to but I can't seem to make it draw on any of the settings or with my swing. I'm not complaining about hitting a straight ball. 

 

I am curious about the effects of the rear weight. I have seen a few reviews on the E723 but no one has gone into changing the rear weight settings and how it affects the results. I guess what I am asking is I was able to use the settings on the adapter of my C721 to get a straight ball. If you use the shaft adapter of the E723 to get a straight ball, would turning the weight on the rear to a draw setting turn that into a draw or is it a matter of using all the adjustments to hit a straight ball which the C721 does great with only using the shaft adapter?

I tried the E723 recently. Yes the weight will help with a draw or fade. It is not too extreme maybe 5-10 yards difference. One problem I had was getting the weight to stay in place. When in the middle, it would shift a little after hitting it for a while. If you put it all the way to one side or the other it would stay in place, but anywhere in the middle or thereabout it had a tenancy to move some. Not a deal breaker for me, but something to note.

 

I had a 721 and the 723 is a definite improvement in all areas. If you like your 721 you will love the 723.

 

It was not able to dethrone the GOAT (G400 MAX) but then again, nothing has. With a better fitting shaft it may have had a better chance.

[eric61]

Resurrecting an old topic here but has anybody hit the C723 driver? Impressions/comparisons to other stuff on the market?

 

I had a chance to demo it and the C723 fairway wood at the Chicago Golf Show over the weekend and really liked the look (10.5 head cranked down and open to 8-point-something) and thought it felt good. But they didn’t have a launch monitor so I didn’t get any numbers.