GolfWRX Giveaway! Custom $2,000+ Damascus Steel MACHINE Putter! Enter Here!

[ckkone]

Machine M2a Converter
-Hand bent hosel
- Deep bite bongo back
- Logo Extension and ATM Microphone
- Right handed
- True Temper Stepped
- 35"
- Super Stroke Slim 3.0 - Black
- Standard loft/lie

[dudegolong]

Wow what a giveaway!


M9 Converter in 1018 Carbon Steel with Torched Oil Can Finish, 303 stainless No. 9 flange with Three Lines and Gooseneck Hosel. 35 inch with Superstroke slim lite!

[ZAP]

[color=#282828]M9 Converter in 1018 Carbon Steel with Torched Oil Can Finish, 303 stainless No. 9 flange with Three Lines and Gooseneck Hosel [/color]

[color=#282828]Lefty of course. 33 inches.[/color]

[color=#282828]This might be the best giveaway I have seen.[/color]

[TWshoot67]

Before I start with my putter choice I want to thank Golfwrx and Machine putters for the opportunity to win something so beautiful as the putter I chose. I couldn't find it in the custom options but I can show the picture and write my custom options.

I want this baby:

 

Specs :

Head weight: 355 grams w/ Site Dot if possible in Damascus ( If not available I'd go with finish above lol) Super sharp looking putter

Length: 34.5"

Loft: 3.5

Lie: 70*

Shaft: Aerotech Steel Fiber

Grip: Machine Logo Lamkin 3gen

 

Hand Stamping: TW on left bumper

Shoot67 on Right bumper

[pickerjohn]

Damascus Steel 35" 3 degrees loft, 71 degree lie angle MRH
M1A Fixed 1/2 offset goose neck, Acid Etched, Std Machine grip.
And Thank You for the opportunity

[madjsp]

M9 convert
hand bent hosel short.
damascus steel logo medallion
blue paintfill
Dog and bal logo
aerotech steel fiber
33 inches,
73* lie angle,
3.5 loft.
JJP snow stamped on the bottom
beautiful damascus steel finish.

I think it would be so pretty, i'd be afraid to use it!

[tackotis]

[b]
MACHINE PUTTER M20 CONVERTER WITH LONG PLUMBER HOSEL, Logo medallion material choice: Mokume Gane, logo medallion engraving: machine logo, handed: Right, Paint Fill: White paint in line, shaft type: ust ff, shaft length: 34, grips: machine logo lamkin 3gen, loft: 3 degrees, lie: 71 degrees[/b]

[J13]

Wow this is great. I'll do an m20 with a regular plumbers neck with half shaft offset and oil quenched flame job. 35" 1 degree of loft.

[Mitchell]

M10 fixer with rolled topline, 1/2 offset gooseneck hosel, VMG original face, 72* lie angle, 3* loft, single thin sight line, hot salts finish, copper medallion with antique patina, Birdie and ball stamp on sole, 34" length with UST FF shaft and Lamkin 3g Machine grip.
Thanks for the wonderful opportunity DB and Golfwrx!

Mitchell

[Raytor]

I'd try a style I have never played - like this:

MACHINE Putter M9 Converter with Stubby Square Cut Plumber Neck
Damascus Steel, with a Dog and Ball logo.
Lime green paint fill, with a TT stepped shaft - 34"
Reverse arch grip, standard loft, 1 degree flat.

The ball has to go in with that...

[yoder9339]

M9 with short hand bent hosel - 36" and 70 degree lie - would leave finish up to the MACHINE experts - very cool putters!

[Stinger82]

I would love an M2A fatback 34" 3* loft 69* lie with the hot salts finish, ust ff shaft, reverse arch grip, sight line, copper medallion, one daughters initials on one bumper and the other daughters initials on the other bumper,and vmg milling! Man that's a dream putter right there!

[Jamboy72]

[b]
[url="http://machineputters.gostorego.com/products/machine-putter-m2a-4pt0-plumber-neck-blade-back-301.html"]MACHINE PUTTER M1A ADJUSTER WITH HALF OFFSET GOOSE NECK[/url]...hand torched and Oil Quenched....initials of all my daughters in cavity and bumpers...sweet![/b]

[simple36]

M2A Fat back with hand bent hosel at 35" 70* lie angle 3* of loft with the acid etch finish 375g with a sight line on the top line and in the back flange. Deep Milled face maybe my initials on one of the bumpers.

[BFDStang]

[b] [size=4]M9 CONVERTER 1ST RUN IN ALUMINUM BRONZE[/size][/b]

[size=4]UST FF Shaft, 35", Machine logo grip, 3 degrees loft, 71 degrees lie[/size]

[size=4]Thank you GolfWrx and Machine Putters![/size]

[squishyy]

M20 Converter
Right Handed
34" w/ Dog & Ball Logo
Damascus Steel

My gosh I just drooled. Sorry.

[sbuds87]

Square cut plumbers neck, M2A blade back, Right Handed, Aerotech Steelfiber 33", 2.5 degrees loft,, 72.5 degrees lie, Black iomic absolute x grip, and satin finish with white and black paint fill. and an SB TOUR READY stamp on the heel. NASTYYYYYYYYYYY!!!!!!!

[sbangerter1969]

M10 Fixer with welded long neck and VMG with MACHINE copper medallion.
Dollar sign stamped or laser engraved on the toe
Aerotech steel fiber shaft
Measuring 34"
Weighing 360 grams
4* loft
71* lie
Machine Reverse Arch Grip

[jhuh]

[b]
[size=3]MACHINE PUTTER M20 CONVERTER WITH MEDIUM SHORT HALF OFFSET PLUMBERS NECK, 34.5", Right Hand, [color=#282828]hand torched oil quench finish, Aerotech Steel Fiber , Lamkin Grip, standard lie and loft.[/color][/size][/b]

[SatelliteGuy]

M6.... Double bend... Heel shafted instead of center... Super wide body... Oil quenched... As heavy as they make it..

" Nicklas " in dancing letters on the bottom.


Super awesome giveaway guys... Thanks a bunch!

[Drive4Show68]

Great giveaway. M2A Art Putter in Damascus Steel with Deep Bite Bongo Back and Double Bend Shaft Over Stud Hosel 34.5 Right Hand Deep Milled. White paint fill. Super Stroke 5.0 Black/White. Thanks Golf WRX

[Hakko]

[left]

[color=#333333][b][b]MACHINE PUTTER M4 MERITAGE WITH DOUBLE BEND SHAFT OVER STUD, 35"[/b][/b][/color]
Aerotech Steel Fiber Shaft[/left]
[left]Paint fill is white[/left]
[left]Finish is Hot Salt Gun Metal Blue[/left]
[left]Standard Loft, Standard Lie[/left]
Custom Grip is SuperStroke 3.0
Custom Engraving is "I can make this!"

[MinnesotaGolfer]

Have an even better idea...a lefty damascus. But I want you to honestly make a one of a kind putter, go all out on it. Do something you've never tried before. Awesome giveaway BTW

[garcia51694]

MACHINE PUTTER M2A - HAND BENT HOSEL - FAT BACK
UST Shaft
33" 1* Flat
Custom paint fill with oil quench finish.

[Riogolfer]

M9 converter w/half offset long plumbers neck
35"
Standard LL
UST FF shaft
Dog and ball logo
Right handed
Torched and oil quenched

[amateur pro]

M20A with a heavy fat back flange. Damascus custom long neck mid slant with pill mill work. TMG milling, 20 lines. Custom acid etched finish with protective coating...and probably change up a few things WHEN I win

[sompin2do]

M10 Adjuster
Right hand
34"
370gm
Loft = 3*
Lie = 70*
Super Stroke 3.0
Shaft TBD
Hand bent disco ball plumbers neck
Damascus logo medallion
TMG (maybe)
Alphabet stamping on sole
Sight line (maybe)
Torched finish

Thanks Machine and GolfWRX!

[Awalkspoiled]

Basically M9 but with the neck inserting slightly off the heel. Half offset hand-bent neck, Damascus acid etched, 365gm, 34.25, Superstroke Mid

[Mob]

M9 converter, Left handed, damascus steel putter with Hand torched rainbow flame finish, one black line alignment aid, Gooseneck hosel

[philsRHman]

Love that M2A Converter Deep Bite Bongo Back, short hand bent hosel (or whatever you advise for a gated stroke). Antique charcoal finish. If the Deep Bite Bongo Back isn't available, then I'd love an M9.

Specs: Left Hand; length 32.5"; UST FF shaft; MG-2 Grip in red; loft 1* weak; lie 3* flat.