Continental Golf - Refinishing and More!

[Continental Golf]

[quote name='cadman88' timestamp='1422592356' post='10846555']
Can you guys do anything like carbon fiber looking or is it usually just solid colors? Great looking work you do by the way.
[/quote]

Normally we just do solid colors, nothing we can do will give it that carbon fiber effect.

Here is a Taylormade we did in a lime green

[Continental Golf]

Here is a Taylormade Ghost we went to a black finish.

[sniper]

RBZ Stage 2 refinished by Continental Golf (1 Week Turnaround Time). Shaft from Ken @ Victory Custom.
[attachment=2601551:ImageUploadedByGolfWRX Mobile1423011359.063499.jpg][attachment=2601553:ImageUploadedByGolfWRX Mobile1423011375.486975.jpg][attachment=2601555:ImageUploadedByGolfWRX Mobile1423011387.786995.jpg][attachment=2601559:ImageUploadedByGolfWRX Mobile1423011404.301813.jpg][attachment=2601561:ImageUploadedByGolfWRX Mobile1423011420.544888.jpg]

[Whiskey_fire]

Is the 15 dollar off promo still going on? Also do I just put my covert head in a box and ship it with a note saying I want it flat black? Also do I send a money order or something? If so how much?

[Russ757]

Sending my 3 913s in Thursday. Getting the blasted satin treatment w either the flat black or exotics beta finish

[Russ757]

Gotta get the order form from their website. Instructions are in the first couple posts

[bu11dog]

[quote name='Whit' timestamp='1423011683' post='10879783']
Is the 15 dollar off promo still going on? Also do I just put my covert head in a box and ship it with a note saying I want it flat black? Also do I send a money order or something? If so how much?
[/quote]
iirc it goes through Feb 27.

[Whiskey_fire]

Sweet thanks guys. I am printing off the form and sending a money order for 35 dollars. Can't wait to be done with that ugly red.

[Continental Golf]

Thanks for the clubs everyone is sending in. Make sure that you are putting Golfwrx at the top of the repair form for the discount and if you didn't feel free to message me or call us up here.

Whit I sent you a PM about the club you are sending in but if you send a money order make sure you include return shipping in the amount otherwise we just charge you the exact cost UPS spits out at us.

Thanks again so much for the support everyone!

[Puppetmaster]

[quote name='Continental Golf' timestamp='1423069991' post='10883575']
Thanks for the clubs everyone is sending in. Make sure that you are putting Golfwrx at the top of the repair form for the discount and if you didn't feel free to message me or call us up here.

Whit I sent you a PM about the club you are sending in but if you send a money order make sure you include return shipping in the amount otherwise we just charge you the exact cost UPS spits out at us.

Thanks again so much for the support everyone!
[/quote]

Thanks and keep up the great work. I really need to get my act together and have some heads shipped down.

[dagoose383]

Do you guys have any pictures of any club heads in a glossy Royal Blue? I am thinking along the lines of the Cobra heads or even the shade of blue on the new Mizuno heads. I really want to get my 910 D2 and 913F done in a nice glossy blue (or maybe even a flat blue if you guys have done it before)

[Continental Golf]

[quote name='dagoose383' timestamp='1423072214' post='10883815']
Do you guys have any pictures of any club heads in a glossy Royal Blue? I am thinking along the lines of the Cobra heads or even the shade of blue on the new Mizuno heads. I really want to get my 910 D2 and 913F done in a nice glossy blue (or maybe even a flat blue if you guys have done it before)
[/quote]
This is the closest I could find that I had a picture of. We can make it look closer to the mizuno if you want but this is a beautiful royal blue in gloss.

[dagoose383]

[quote name='Continental Golf' timestamp='1423073518' post='10883947']
[quote name='dagoose383' timestamp='1423072214' post='10883815']
Do you guys have any pictures of any club heads in a glossy Royal Blue? I am thinking along the lines of the Cobra heads or even the shade of blue on the new Mizuno heads. I really want to get my 910 D2 and 913F done in a nice glossy blue (or maybe even a flat blue if you guys have done it before)
[/quote]
This is the closest I could find that I had a picture of. We can make it look closer to the mizuno if you want but this is a beautiful royal blue in gloss.
[/quote]

PERFECT!

So on a 910/913 head, would you be able to do that color over the whole head or would only specific areas be able to be turned blue? Would it be possible for the sole to be blue as well and possible keep the face dark?

I can PM you with what I am thinking if that would be the better method

[semarlor]

Just sent in my Newport Classic for refinishing and milling a sight line on the top! I cannot wait to get it back. I've got a new stepless shaft and pistolero waiting....it's going to be a long couple of weeks...

[rcain1us]

[quote name='Continental Golf' timestamp='1423069991' post='10883575']
Thanks for the clubs everyone is sending in. Make sure that you are putting Golfwrx at the top of the repair form for the discount and if you didn't feel free to message me or call us up here.

Whit I sent you a PM about the club you are sending in but if you send a money order make sure you include return shipping in the amount otherwise we just charge you the exact cost UPS spits out at us.

Thanks again so much for the support everyone!
[/quote]

I assume I can just send the head and not the shafted club?

If I give you a Covert Tour head do you paint the cavity too or just the crown?

(Will pain even adhere to the white plastic?)

[rtraudt]

[quote name='Continental Golf' timestamp='1423073518' post='10883947'][quote name='dagoose383' timestamp='1423072214' post='10883815']
Do you guys have any pictures of any club heads in a glossy Royal Blue? I am thinking along the lines of the Cobra heads or even the shade of blue on the new Mizuno heads. I really want to get my 910 D2 and 913F done in a nice glossy blue (or maybe even a flat blue if you guys have done it before)
[/quote]
This is the closest I could find that I had a picture of. We can make it look closer to the mizuno if you want but this is a beautiful royal blue in gloss.[/quote]

Love it! Can I ask how the Greek letters are put off the head?

[Continental Golf]

[quote name='rtraudt' timestamp='1423183220' post='10894501']
[quote name='Continental Golf' timestamp='1423073518' post='10883947'][quote name='dagoose383' timestamp='1423072214' post='10883815']
Do you guys have any pictures of any club heads in a glossy Royal Blue? I am thinking along the lines of the Cobra heads or even the shade of blue on the new Mizuno heads. I really want to get my 910 D2 and 913F done in a nice glossy blue (or maybe even a flat blue if you guys have done it before)
[/quote]
This is the closest I could find that I had a picture of. We can make it look closer to the mizuno if you want but this is a beautiful royal blue in gloss.[/quote]

Love it! Can I ask how the Greek letters are put off the head?
[/quote]
Actually the customer had dropped them off with the golf club and they were thin so they worked very well putting them on before we spray the last coat on to protect it and the paint. Small decals like that that are thin show great imo. Thanks guys and we have a couple more pictures coming up tomorrow that I think you guys are going to love!!!

[Continental Golf]

[quote name='rcain1us' timestamp='1423167972' post='10892035']
[quote name='Continental Golf' timestamp='1423069991' post='10883575']
Thanks for the clubs everyone is sending in. Make sure that you are putting Golfwrx at the top of the repair form for the discount and if you didn't feel free to message me or call us up here.

Whit I sent you a PM about the club you are sending in but if you send a money order make sure you include return shipping in the amount otherwise we just charge you the exact cost UPS spits out at us.

Thanks again so much for the support everyone!
[/quote]

I assume I can just send the head and not the shafted club?

If I give you a Covert Tour head do you paint the cavity too or just the crown?

(Will pain even adhere to the white plastic?)
[/quote]
That cavity just does not spray well, we have tried it a couple times and they just are not good enough to be honest. As far as the head goes you can send it with our without a head attached, shipping is a little cheaper with just the head though!

[rcain1us]

[quote name='Continental Golf' timestamp='1423184643' post='10894721']
[quote name='rcain1us' timestamp='1423167972' post='10892035']
[quote name='Continental Golf' timestamp='1423069991' post='10883575']
Thanks for the clubs everyone is sending in. Make sure that you are putting Golfwrx at the top of the repair form for the discount and if you didn't feel free to message me or call us up here.

Whit I sent you a PM about the club you are sending in but if you send a money order make sure you include return shipping in the amount otherwise we just charge you the exact cost UPS spits out at us.

Thanks again so much for the support everyone!
[/quote]

I assume I can just send the head and not the shafted club?

If I give you a Covert Tour head do you paint the cavity too or just the crown?

(Will pain even adhere to the white plastic?)
[/quote]
That cavity just does not spray well, we have tried it a couple times and they just are not good enough to be honest. As far as the head goes you can send it with our without a head attached, shipping is a little cheaper with just the head though!
[/quote]

Thanks, I figured the cavity was a no go.

Head is boxed and will go out tomorrow

[MLeeJr]

The guys at Continental are the best. They have done a ton of work for me --- drivers, wedge grinds, putters, hand stamping, loft and lie adjustment, shafts, grips --- you name it. I would refer anyone and everyone to them. It doesn't get any better than them. Not only is their work top notch, but they are really great folks as well.

[dsipos]

If I wanted to refinish a pro platinum Cameron Mil spec, what are my options?

[SweetTeaGolfer]

[quote name='Continental Golf' timestamp='1421437201' post='10758739']
Hi everyone!

We are Continental Golf and are honored to be part of the GolfWRX community.

A little about us

We started back in 1972 as a small repair shop and have grown into the largest repair shop on the east coast. We specialize in custom fitting, repair and of course refinishing.

Our repair shop is 5,000 square feet with a 400 square foot spray booth. We can do anything from repairing or refinishing a wooden woods to reshafting, hotmelting, grinding,regooving irons and refinishing the newest custom color golf clubs

Going forward we will be putting some examples of our refinished clubs and we very much look forward to hearing from everyone and being part of this community!

If anyone has any questions you can visit our website at continentalgolf.net or our facebook page [url="https://www.facebook.com/pages/Continental-Golf/399181940140695"]https://www.facebook...399181940140695[/url] (has some pictures of our different finishes). Our number is 919-833-8887 and you can call and talk any any of us if you have further questions.
[/quote]

Just sent my Newport to be done, can't wait to get it back.

[pierso2]

[quote name='Continental Golf' timestamp='1421437201' post='10758739']
Hi everyone!

We are Continental Golf and are honored to be part of the GolfWRX community.

A little about us

We started back in 1972 as a small repair shop and have grown into the largest repair shop on the east coast. We specialize in custom fitting, repair and of course refinishing.

Our repair shop is 5,000 square feet with a 400 square foot spray booth. We can do anything from repairing or refinishing a wooden woods to reshafting, hotmelting, grinding,regooving irons and refinishing the newest custom color golf clubs

Going forward we will be putting some examples of our refinished clubs and we very much look forward to hearing from everyone and being part of this community!

If anyone has any questions you can visit our website at continentalgolf.net or our facebook page [url="https://www.facebook.com/pages/Continental-Golf/399181940140695"]https://www.facebook...399181940140695[/url] (has some pictures of our different finishes). Our number is 919-833-8887 and you can call and talk any any of us if you have further questions.
[/quote]

Do you have the TM SLDR "S" Silver paint color as an option?

[coghillcutter]

[quote name='pierso2' timestamp='1423518074' post='10919621']
[quote name='Continental Golf' timestamp='1421437201' post='10758739']
Hi everyone!

We are Continental Golf and are honored to be part of the GolfWRX community.

A little about us

We started back in 1972 as a small repair shop and have grown into the largest repair shop on the east coast. We specialize in custom fitting, repair and of course refinishing.

Our repair shop is 5,000 square feet with a 400 square foot spray booth. We can do anything from repairing or refinishing a wooden woods to reshafting, hotmelting, grinding,regooving irons and refinishing the newest custom color golf clubs

Going forward we will be putting some examples of our refinished clubs and we very much look forward to hearing from everyone and being part of this community!

If anyone has any questions you can visit our website at continentalgolf.net or our facebook page [url="https://www.facebook.com/pages/Continental-Golf/399181940140695"]https://www.facebook...399181940140695[/url] (has some pictures of our different finishes). Our number is 919-833-8887 and you can call and talk any any of us if you have further questions.
[/quote]

Do you have the TM SLDR "S" Silver paint color as an option?
[/quote]


i can vouch. they do

[coloradogolfer632]

how much wold it be to fix "dummy" marks on a 913 d2 head wit the same finish

[Russ757]

Just sent off three 913s

[Continental Golf]

[quote name='dsipos' timestamp='1423412078' post='10911151']
If I wanted to refinish a pro platinum Cameron Mil spec, what are my options?
[/quote]
With that older cameron the only finish we can do because that is a plated putter would be a black oxide, like the original cameron putters. The putter would finish would cost you 55 dollars plus the shipping back to you and you would get 15 dollars off of that with the golfwrx promotion.

This would also include paintfill unless you wanted something exotic like every other letter a certain color etc. Thanks very much

[Continental Golf]

[quote name='coloradogolfer632' timestamp='1423539860' post='10922175']
how much wold it be to fix "dummy" marks on a 913 d2 head wit the same finish
[/quote]
That driver back to original would cost you 50 dollars plus the shipping back to you, with the golfwrx promo you would save 15 dollars off of that price. Thanks very much

[Continental Golf]

Loading a couple pictures of Scotty Camerons we refinished and also a Lime G25 that we also faded the shaft with the lime green. Hope you guys like it.

[Continental Golf]

The putter pictures.