SeeMore Putters - Anyone?

[SeeMore Putters]

On 11/12/2021 at 11:38 AM, tider992010 said:

I just picked up this putter unexpectedly and cannot wait to try it.  

 

Seemore M5HT Platinum RST.  

 

I'll let you know how it goes.  

Following up and seeing how this is going?

[vandyfan]

Update on the Rosemark putter grip with the seemore head, it is truly amazing!

 

 

Edited December 16, 2021 by blackbdmillsaps

[tider992010]

Very nice looking putter. Hit em stright! 

[JahSteve]

just picked up an older M3 LH. Def some getting used to. So far has not kicked the YES! Callie out of the bag but have a feeling once i get the feel for what the seemore putter is trying to do i will be done searching for putters. 

[SeeMore Putters]

On 12/17/2021 at 12:33 PM, JahSteve said:

just picked up an older M3 LH. Def some getting used to. So far has not kicked the YES! Callie out of the bag but have a feeling once i get the feel for what the seemore putter is trying to do i will be done searching for putters. 

M3 is a great looking putter with a great feel coming off the face.  Let us know how it goes.  Have any questions send us a note at [email protected].  

[SeeMore Putters]

if you haven't tried it you need to take a look at the mini Giant series.  Unbelievable feel and correct us of MOi in a putter.  Roll a few putts with it.

[Bobbyjoegrooves]

I rescued this beauty from the bay of evil. She passed the living room rug test enough to name her “argyle”. A no-offset putter is what I’ve needed, I can feel it. 2022 is the year of the disappearing golf ball.

[SeeMore Putters]

10 hours ago, Bobbyjoegrooves said:

I rescued this beauty from the bay of evil. She passed the living room rug test enough to name her “argyle”. A no-offset putter is what I’ve needed, I can feel it. 2022 is the year of the disappearing golf ball.

Beautiful gamer!  Keep us posted on how it goes.  Always happy to help. #allstate!

[Rapidcat]

Great thread, enjoyable read.

 

Can anyone tell me what the head weight of a SeeMore Corona Del Mar FGP Blade should be?

 

One of these: 

 

 

Any help appreciated!

 

Edit: this isn't the Deep Flange mid mallet which I have seen online stated as 360g.

Edited February 12, 2022 by Rapidcat

[Cactus Jack]

How does “Face Balanced at Impact” compare to Axis 1, Edel, and Directed Force putters? 

[SeeMore Putters]

On 2/12/2022 at 12:00 AM, Rapidcat said:

Great thread, enjoyable read.

 

Can anyone tell me what the head weight of a SeeMore Corona Del Mar FGP Blade should be?

 

One of these: 

 

 

Any help appreciated!

 

Edit: this isn't the Deep Flange mid mallet which I have seen online stated as 360g.

350 grams.  Great looking gamer.

[DCCarpenter]

I just bought a older golf bag with bundle of clubs in it , one of them is a SeeMore FGP putter, it is a center shafted one that look like the Payne Stewart Open winner.

 

I usually use a Ping Anser 3 , this is definitely heavier but once I figured out I needed a longer back swing I was putting better than the Anser with it on my mat at home. Looking forward to trying it out at the course, my putting has been very erratic with a really hard time lagging putts close. Hopefully this gets me on track.

 

 

[SeeMore Putters]

On 2/18/2022 at 9:15 AM, DCCarpenter said:

I just bought a older golf bag with bundle of clubs in it , one of them is a SeeMore FGP putter, it is a center shafted one that look like the Payne Stewart Open winner.

 

I usually use a Ping Anser 3 , this is definitely heavier but once I figured out I needed a longer back swing I was putting better than the Anser with it on my mat at home. Looking forward to trying it out at the course, my putting has been very erratic with a really hard time lagging putts close. Hopefully this gets me on track.

 

 

 

That is a great gamer.  Let us know how it goes.  Always happy to help.  We have some great videos as well.  Welcome to team SeeMore.

[Teehol]

On 11/12/2021 at 12:45 PM, T-MAC said:

I'm normally more of a blade guy but every once in awhile my alignment gets off and I'll reach for this and game it for awhile.  Usually gets me back on track and it has a great feel for a mid mallet.  Love the alignment lines on it.

Please pm me if you have any interest in selling! 

[DCCarpenter]

I posted earlier about the SeeMore FGP blade center shafted blade style putter I'd picked up recently. I have enjoyed using it and have holed some long putts and done pretty well lagging putts but I'm struggling with short putts, 4' and less. I'm almost more comfortable from 5' or 6' than 3'.

 

It is  heavier than the bronze Anser 3 I had and it seems difficult to tap it softly enough for those 3' downhill putts. Any suggestions?

[SeeMore Putters]

11 hours ago, DCCarpenter said:

I posted earlier about the SeeMore FGP blade center shafted blade style putter I'd picked up recently. I have enjoyed using it and have holed some long putts and done pretty well lagging putts but I'm struggling with short putts, 4' and less. I'm almost more comfortable from 5' or 6' than 3'.

 

It is  heavier than the bronze Anser 3 I had and it seems difficult to tap it softly enough for those 3' downhill putts. Any suggestions?

 

Send us a note at [email protected].  Work on a gate drill to make sure your ball is starting on line.  The SeeMore CT Mirror is a great tool to use as well.  You have the ability to see your eyes and shoulders as well as working on putter face being square (as well as putting through two tees "gate").  Always happy to help - [email protected].

[tider992010]

I am currently playing the Seemore HT mallet with RST neck.  Great Putter. 

[Fairway14]

12 hours ago, DCCarpenter said:

I posted earlier about the SeeMore FGP blade center shafted blade style putter I'd picked up recently. I have enjoyed using it and have holed some long putts and done pretty well lagging putts but I'm struggling with short putts, 4' and less. I'm almost more comfortable from 5' or 6' than 3'.

 

It is  heavier than the bronze Anser 3 I had and it seems difficult to tap it softly enough for those 3' downhill putts. Any suggestions?

 

I've tried Seemore putters but found the head weight too heavy. That said, I understand Seemore has in recent years tried offering 330 gram putter heads but learned that customers prefer to buy the heavier heads.  I think the bronze Semore which Payne Stewart played to win the US Open had a head weight of about 325 grams.

[Ty-Webb]

On 3/3/2022 at 6:40 AM, tider992010 said:

I am currently playing the Seemore HT mallet with RST neck.  Great Putter. 

 

 

Great timing on that post. I had a Seemore M5HT Platinum center shaft that I bought off BST. I wasn't a fan of the center shaft but the feel of the putter was the best I have ever felt, so back in Nov 2021 I asked a question in this thread about sending the putter in for a hosel change and was quickly given a point of contact. Long story short after a few months procrastinating I sent in the putter to Seemore and got back a new stick an inch longer, new grip, black 100g shaft and changed to the RST hosel. Got it back early last week and it's amazing. I gotta give it up to the guys I dealt with over at Seemore.. Brandon and Jason were fantastic. 

 

Edit: I'll post a picture of the new wand soon! 

Edited March 6, 2022 by Ty-Webb

[Honeybadger]

Looks like SC is ripping off Seemore’s Rifle Scope idea again…

 

[SeeMore Putters]

On 3/6/2022 at 7:07 AM, Honeybadger said:

Looks like SC is ripping off Seemore’s Rifle Scope idea again…

 

Can't remember that Oscar Wilde quote....🤔

[SeeMore Putters]

On 3/3/2022 at 8:45 AM, Fairway14 said:

 

I've tried Seemore putters but found the head weight too heavy. That said, I understand Seemore has in recent years tried offering 330 gram putter heads but learned that customers prefer to buy the heavier heads.  I think the bronze Semore which Payne Stewart played to win the US Open had a head weight of about 325 grams.

 

We have different weight options.  Feel free to send us a note at [email protected].  Payne's head was lighter than that.  Heads have gotten heavier partially due to the number of different grip offerings.  Too heavy of a putter head can be difficult to control.  Always happy to help.

[Fairway14]

4 hours ago, SeeMore Putters said:

 

We have different weight options.  Feel free to send us a note at [email protected].  Payne's head was lighter than that.  Heads have gotten heavier partially due to the number of different grip offerings.  Too heavy of a putter head can be difficult to control.  Always happy to help.

 

I telephoned Seemore company and the employee on the phone told me all the inventory was heads of 340 or heavier. He said no more 330 gram (or lighter) heads. I am interested to buy center shaft orientation (or near center shaft) with head weight in the range of 320 to 330 grams.

[SeeMore Putters]

17 hours ago, Fairway14 said:

 

I telephoned Seemore company and the employee on the phone told me all the inventory was heads of 340 or heavier. He said no more 330 gram (or lighter) heads. I am interested to buy center shaft orientation (or near center shaft) with head weight in the range of 320 to 330 grams.

 

In order to find a SeeMore head at this weight you will have to go to the secondary markets.  When you find one feel free to send us a note and pic to [email protected] and will be happy to follow up. 

[joostin]

Ran across something I forgot about.  In 2016 I designed and shared this concept with SeeMore.  Nothing came out of it, but Jim the CEO responded saying they looked at similar ideas and a thanks for sharing.

 

It's a decal you can print and tape to the shaft that, at address, frames the bottom points of the white "RST" lines with a horizontal line (might not work for double bend or plumber's neck).  It would be positioned per your own setup to help with consistent setup.  I figured the RST lines help with "X" setup, but not necessarily "Y" and "Z" setup (eyes/hands in 3D space).  Pics:

 

 

I'll find the printable PDF to post here.  Decal was made in CAD based on my own eye/hand setup measurements:  eye height, eye distance inside ball, putter length and lie angle at address.  It may be good enough for others, but the curves and variable thicknesses are meant to show as a straight horizontal line at address.  Ideally it should be customized per your measurements, but it takes a little time, so may ask for a tiny tiny donation if anyone's interested in that.  This may be of zero interest, like with SeeMore 🤷‍♂️, but PM me if so.  Or you can just try the one I will attach to this post in the next day or 2.

 

It can also be made to frame the top and bottom like a white box, or whatever colors.  You would position and affix to the shaft per CAD dimensions or adjust as needed (before fully taping regular or sticker paper).  FWIW I don't play with it anymore, but will always keep my old SeeMore FGP... with decal 🙂  Shoutout @SeeMore Puttersshaft_sightline_20160306-.pdf

Edited March 18, 2022 by joostin
Added pdf drawing to print decal

[Rapidcat]

Been looking at various SeeMore models for purchase, can anyone tell me if this one:

• is Face Balanced At Impact?
• Does it have toe-hang and if so, how much?
• Its Head weight (I think is 360 grams).

 

Haven't been able to find all the spec info on-line.

 

Thanks for any help!

[SeeMore Putters]

4 hours ago, Rapidcat said:

Been looking at various SeeMore models for purchase, can anyone tell me if this one:

• is Face Balanced At Impact?
• Does it have toe-hang and if so, how much?
• Its Head weight (I think is 360 grams).

 

Haven't been able to find all the spec info on-line.

 

Thanks for any help!

Send us a note at [email protected].  Happy to help.  It is Face Balanced at Impact.  We can get you more details.  Ask for Jim/Drew/Brandon.  Thanks. 

[SeeMore Putters]

New 2022 Classic series are available in Left Handed.  Appreciate it.

[Motoboss]

I have an old S3 and considering the new Model T.
Question is can removable weights be added to the bottom?

Can I order without flange or top site lines? (RST only)

 

Great putter just looking for a change.

Thanks

[Motoboss]