SeeMore Putters - Anyone?

[SeeMore Putters]

17 hours ago, Motoboss said:

I have an old S3 and considering the new Model T.
Question is can removable weights be added to the bottom?

Can I order without flange or top site lines? (RST only)

 

Great putter just looking for a change.

Thanks

Removable weights can not be added to the bottom.  However we can add more weight with an internal hosel.  You can request for the white lines to be removed.  You will still see the indention of the lines.  Send us a note at [email protected] and ask for Brandon/Drew.  Thanks.  

[Motoboss]

2 minutes ago, SeeMore Putters said:

Removable weights can not be added to the bottom.  However we can add more weight with an internal hosel.  You can request for the white lines to be removed.  You will still see the indention of the lines.  Send us a note at [email protected] and ask for Brandon/Drew.  Thanks.  

Thank you. I figured a conversation would be in order.

[SeeMore Putters]

7 hours ago, Motoboss said:

Thank you. I figured a conversation would be in order.

Always happy to help - email or call.  Thanks again!

[jls667]

Anyone have experience with the Platinum M7 Tour? Specifically this one:

 

https://store.seemore.com/catalog/product/view/id/3716/s/platinum-m7-tour-p1411/category/41/

 

I played the PTM1 for years and last year switched to the Cleveland HB Soft Premier 3. I could easily game both but I just sink more with the HB and the heel shaft feels more natural to me with the extra weight towards the toe. The PM7 Tour seems like a blend between the two that would combine RST with the release of a heavier toe hang, heel shafted putter.

 

I wish I could test one out but I don't know any shop nearby that sells SeeMore let alone that exact one so any insight would be appreciated. 

Edited May 12, 2022 by jls667

[SeeMore Putters]

13 hours ago, jls667 said:

Anyone have experience with the Platinum M7 Tour? Specifically this one:

 

https://store.seemore.com/catalog/product/view/id/3716/s/platinum-m7-tour-p1411/category/41/

 

I played the PTM1 for years and last year switched to the Cleveland HB Soft Premier 3. I could easily game both but I just sink more with the HB and the heel shaft feels more natural to me with the extra weight towards the toe. The PM7 Tour seems like a blend between the two that would combine RST with the release of a heavier toe hang, heel shafted putter.

 

I wish I could test one out but I don't know any shop nearby that sells SeeMore let alone that exact one so any insight would be appreciated. 

Send us a note at [email protected] and we would be happy to try to help as much as we can with questions and thoughts that you might have.  Thanks.

[Sixthreesix]

Have played Ansers, Rossas, Scotty, 2 ball, and a spider. Got a PCB 4 years ago and it has never left the bag. The consistency it brings to setup, stroke, and finish helps eliminate the dreadful knee buckling 6ft putter thoughts.

 

From St. Louis, not near Nashville ever, but absolutely need to go through the custom fitting. Keep making the midwests best putters!

[joshrad_golf]

I've used an SB20 for a couple of years now! SeeMore makes great products with great personalization. The guys in Tennessee will take great care of you if you ever go in to see them for a fitting!

[Misc1600]

Rare SeeMore 1.699

[SeeMore Putters]

On 5/21/2022 at 2:57 PM, Sixthreesix said:

Have played Ansers, Rossas, Scotty, 2 ball, and a spider. Got a PCB 4 years ago and it has never left the bag. The consistency it brings to setup, stroke, and finish helps eliminate the dreadful knee buckling 6ft putter thoughts.

 

From St. Louis, not near Nashville ever, but absolutely need to go through the custom fitting. Keep making the midwests best putters!

Thanks for being a part of Team SeeMore.  That is a great gamer.  Reach out to us when you are heading to Nashvegas!  Go Cards!!!

[SeeMore Putters]

On 5/21/2022 at 4:15 PM, joshrad_golf said:

I've used an SB20 for a couple of years now! SeeMore makes great products with great personalization. The guys in Tennessee will take great care of you if you ever go in to see them for a fitting!

 

Thanks for the kind words.  Always happy to help. Always family.

[SeeMore Putters]

12 hours ago, Misc1600 said:

Rare SeeMore 1.699

oldie but goodie! 

[joekelli]

I have always been intrigued by the SeeMore putters but for some reason just never tried one.  That is until a couple months ago. So after trying an original FGP I just had to get one, I ended up find a good deal on a mint SB-2. I loved it!!!  Then I found a mFGPss Deep Flange that I just had to have. Love it!!   Then I saw a Mini Giant on FB marketplace and traded my Spider putter for it. So now I am up to 3 Seemore putters in my collection of center shaft putters. LOL

 

here is my small putter collection...

Edited September 2, 2022 by joekelli

[PixlPutterman]

Can one simply order an offset shaft and swap it or is it more complicated?

 

I keep circling back to Seemore, nothing feels like it....but saw a few offset set up and I'm wondering if that's the ticket to it staying in the bag...

[SeeMore Putters]

On 9/9/2022 at 11:23 PM, PixlPutterman said:

Can one simply order an offset shaft and swap it or is it more complicated?

 

I keep circling back to Seemore, nothing feels like it....but saw a few offset set up and I'm wondering if that's the ticket to it staying in the bag...

The images above that are shown - we will not be able to change into an offset shaft due to the size of the RST on the MFGP2 and Z3c putter.  We do have the Z3 in a heel shaft that has the ability to come in an offset option.  Here are some options for offset and RST hosel from SeeMore.com.  Feel free to send us a note at [email protected] and happy to help with any follow up questions.  Thanks.

[PixlPutterman]

Just ordered a Garsen Quad to try out since I see a lot of Seemore nerds using them 🙂

[5hort5tuff]

I truly think more people would play these if they modernized their anesthetics. I'll admit, they have been doing a much better job over the last few years. 

 

If they replaced the meat and potatoes "SeeMore" font with a smaller, more modern logo, maybe a little more dead space in the cavity, they would look much better. 

[SeeMore Putters]

16 hours ago, PixlPutterman said:

Just ordered a Garsen Quad to try out since I see a lot of Seemore nerds using them 🙂

Very nice putter grip.

[SeeMore Putters]

10 hours ago, 5hort5tuff said:

I truly think more people would play these if they modernized their anesthetics. I'll admit, they have been doing a much better job over the last few years. 

 

If they replaced the meat and potatoes "SeeMore" font with a smaller, more modern logo, maybe a little more dead space in the cavity, they would look much better. 

Appreciate the input.  Will pass it along.  Thanks.

[MMB1500]

New addition to the bag...

 

 

 

 

[SeeMore Putters]

On 3/17/2023 at 2:05 PM, MMB1500 said:

New addition to the bag...

 

 

 

 

Looks awesome.  Great gamer!  Always happy to help.  Reach out anytime at [email protected] or here.  Have a great week and welcome to Team SeeMore!

[Liveonce]

@SeeMore PuttersHow would a garsen Max work on these?

Edited May 5, 2023 by Liveonce

[AzRoger]

Picked up a new SeeMore putter last weekend, the putter head popped off the second time I used it. Looked like there was very little if any epoxy on the shaft tip, have a feeling most of the epoxy probably went up inside the shaft tip. Not a huge problem, should be easy enough to fix.

 

[5hort5tuff]

I dont see any epoxy residue either. Easy fix is right.

[SeeMore Putters]

On 5/5/2023 at 2:24 PM, AzRoger said:

Picked up a new SeeMore putter last weekend, the putter head popped off the second time I used it. Looked like there was very little if any epoxy on the shaft tip, have a feeling most of the epoxy probably went up inside the shaft tip. Not a huge problem, should be easy enough to fix.

 

Send us a note at [email protected].  Happy to help.  Sorry for the inconvenience.  

[SeeMore Putters]

On 5/5/2023 at 1:38 PM, Liveonce said:

@SeeMore PuttersHow would a garsen Max work on these?

Fantastic.  We offer Garsen grips as one of our custom grip options.  Garsen max will work great.  Thanks.  Need more info send us a note at [email protected].  Happy tp help. 

[Phebus]

SeeMore Putters, I love good customer service. I just found a good reason to go roll some of your putters and maybe pick one up. I actually had one many many years ago that I picked up from Dave Cook at San Clemente golf course. 

[AzRoger]

6 hours ago, SeeMore Putters said:

Send us a note at [email protected].  Happy to help.  Sorry for the inconvenience.  

I cleaned it up and reapplied some epoxy this past weekend, used it today, looks good to go. Dallasgolf was willing to send out a replacement but I didn't see a need for it.

Edited May 8, 2023 by AzRoger

[SeeMore Putters]

42 minutes ago, AzRoger said:

I cleaned it up and reapplied some epoxy this past weekend, used it today, looks good to go. Dallasgolf was willing to send out a replacement but I didn't see a need for it.

Ok, if something else happens let us know - [email protected].  Welcome to Team SeeMore.  Always happy to help.

[dmeeksDC]

On 9/10/2022 at 12:23 AM, PixlPutterman said:

Can one simply order an offset shaft and swap it or is it more complicated?

 

I keep circling back to Seemore, nothing feels like it....but saw a few offset set up and I'm wondering if that's the ticket to it staying in the bag...

Always thought the Z3C was a sweet putter. I like the shape and sole. 

[Redpro]

SeeMore Si5 mallet here, with the BGT Stability Pro shaft.

 

Money club.