MACHINE Putters Picture Thread

[choeppner]

Hey Guys,

Sorry for the delay in posting pics. Let me make it up for yall

Here is a Custom MACHINE that is being built for a member on here This is the 1st Billet Copper MACHINE M10 Adjuster. The head is milled from a solid block of Billet Copper

The hosel on this MACHINE will be a 1018 Carbon Copper Plated Modular Center Shaft Over Hosel

Still more work to go, but she is coming along nicely

Enjoy

-Chris

[attachment=1152514:MP_M10_B_Abel_WIP_9c.jpg]

[attachment=1152520:MP_M10_B_Abel_WIP_9ch.jpg]

[attachment=1152522:MP_M10_B_Abel_WIP_9f.jpg]

[attachment=1152524:MP_M10_B_Abel_WIP_9s.jpg]

[choeppner]

Hey Guys,

I hope everyone is having a great day I wanted to share one more MACHINE Work-In-Progress with yall

This MACHINE features a 303 Stainless M10 Adjuster Head with as 303 Stainless Fluted Hand Bent Hosel. This pic was taken right after the bending of the hosel

Our next step is to clean up the head and then Dave will apply a Custom Torch Finish to the head and the neck

Enjoy

-Chris

[attachment=1152874:MP_M10_M_Bryan_WIP_7c.jpg]

[RightHandRough]

My copper beastie is looking great. Can't wait to get it and hit the green!

Then I'll be kicking booty and I'll be able to tell my partners

Thanks Chris and Dave for the

[choeppner]

Thought you would like that one Brian LOL

Thanks for the great comments

-Chris

[weaver93]

[quote name='choeppner' timestamp='1336399743' post='4864720']
Hey Guys,

Sorry for the delay in posting pics. Let me make it up for yall

Here is a Custom MACHINE that is being built for a member on here This is the 1st Billet Copper MACHINE M10 Adjuster. The head is milled from a solid block of Billet Copper

The hosel on this MACHINE will be a 1018 Carbon Copper Plated Modular Center Shaft Over Hosel

Still more work to go, but she is coming along nicely

Enjoy

-Chris

[attachment=1152514:MP_M10_B_Abel_WIP_9c.jpg]

[attachment=1152520:MP_M10_B_Abel_WIP_9ch.jpg]

[attachment=1152522:MP_M10_B_Abel_WIP_9f.jpg]

[attachment=1152524:MP_M10_B_Abel_WIP_9s.jpg]
[/quote]

[size="5"]

REALLY??????

[/size][size="3"]This is too much!!!![/size]

[choeppner]

Thought you would like that one Mark Should I sign you up for 10 of them LOL

Thanks

-Chris

[blade_man]

[quote name='choeppner' timestamp='1336436019' post='4868526']
Thought you would like that one Mark Should I sign you up for 10 of them LOL

Thanks

-Chris
[/quote]


When I saw it the first name that came to mind was weaver!
Sorry Mark, maybe they will let you have the next one!! LOL!

[choeppner]

Mark,

Wait till you see the updated pics The Copper Modular Center Shaft really match's this head well.... LOL LOL LOL

-Chris

[choeppner]

Hey Guys :)

 

I hope everyone is having a great week :) I wanted to share some completed pics of this Custom MACHINE that Dave took right before she was shipped :)

 

As you can see, the Copper Plated Modular Center Shaft Hosel really match's this head well and the simple black paint fill was the perfect choice :)

 

Can't wait to hear this members thoughts once he receives it for his rounds this weekend :)

 

Enjoy

 

-Chris

 

 

 

 

[weaver93]

Hey Guys :)

 

I hope everyone is having a great week :) I wanted to share some completed pics of this Custom MACHINE that Dave took right before she was shipped :)

 

As you can see, the Copper Plated Modular Center Shaft Hosel really match's this head well and the simple black paint fill was the perfect choice :)

 

Can't wait to hear this members thoughts once he receives it for his rounds this weekend :)

 

Enjoy

 

-Chris

 

 

 

 

 

WHATEVER MAN!!!!!

 

BRIAN, I HOPE YOU ARE HAPPY......YOU'R KILLIKG ME!!!!

 

BEAUTIFUL!!!!

[RightHandRough]

I can't wait til I get it tomorrow. I'll have a hard time sleeping, like a kid on Christmas. Dave, Chris, and Liby are simply awesome folks. I hope to get a few rounds in and post a review Tuesday next week.

[ucdan5]

Just got my Machine M2A in Antique Charcoal finish with a Beefy Back flange, deep vertical milling and it's even better than than the pics. Reverse Arch grip bent 2* flat. Some tungsten powder in the shaft for some extra weight. Put it all together and you get an amazing feeling flat stick.

[choeppner]

[quote name='RightHandRough ' timestamp='1336702978' post='4892684']
I can't wait til I get it tomorrow. I'll have a hard time sleeping, like a kid on Christmas. Dave, Chris, and Liby are simply awesome folks. I hope to get a few rounds in and post a review Tuesday next week.
[/quote]

Glad you like it Brian I can't wait to hear your thoughts once you get to open the box in see it in hand

I hope she makes a ton of birdies for you

If there is anything you need in the future, please don't hesitate to ask

Thanks

-Chris

[choeppner]

[quote name='ucdan5' timestamp='1336704998' post='4892928']
Just got my Machine M2A in Antique Charcoal finish with a Beefy Back flange, deep vertical milling and it's even better than than the pics. Reverse Arch grip bent 2* flat. Some tungsten powder in the shaft for some extra weight. Put it all together and you get an amazing feeling flat stick.
[/quote]
Thanks for Sharing and the great Post Can't wait to hear your thoughts once you get to use her on the course

-Chris

[ucdan5]

[quote name='choeppner' timestamp='1336757327' post='4896236']
[quote name='ucdan5' timestamp='1336704998' post='4892928']
Just got my Machine M2A in Antique Charcoal finish with a Beefy Back flange, deep vertical milling and it's even better than than the pics. Reverse Arch grip bent 2* flat. Some tungsten powder in the shaft for some extra weight. Put it all together and you get an amazing feeling flat stick.
[/quote]
Thanks for Sharing and the great Post Can't wait to hear your thoughts once you get to use her on the course

-Chris
[/quote]

I've hit about 1,800 putts on my carpet at home since I've gotten it 2-3 days ago. My wife probably wants to kill me, but if I have to sit through the Real Housewives of Crazytown, USA, she can endure me hitting putts.

Played yesterday with it and didn't get a chance to putt too much on the practice green with it before the round. Just a couple of quick putts, but it felt great on the course. The Reverse Arch grip is extremely easy to get square and the ball is so soft coming off the face.

Chris, let me know if you got my last email or two about getting some quotes on the pieces I mentioned, I wanted to get them ordered ASAP.

[choeppner]

Hey Guys,

 

I hope everyone is having a great week :) I wanted to share some pics of a Custom MACHINE that was just completed and shipped to it' new owner :)

 

This MACHINE Features a 303 Stainless M10 Fixer with Heavy Melted Bumpers and our new Thread Milled Groove face milling. The neck is our Square Cut Plumber Neck :)

 

This MACHINE has been finished in our Morning Dew Satin Finish :)

 

Enjoy :)

 

-Chris

 

 

 

 

 

[DB MACHINE]

Thanks for all the positive comments everyone! It is great to hear positive reviews, and I know the whole team appreciates hearing your comments.

I'm back in the shop putting the finishing touches of some new Tour putters for the Byron Nelson, but thought I would take a moment to post some photos of another Custom MACHINE putter that recently went out to it's new home!

Please see attached photos of another Custom M10, this being an Adjuster model, in 303 stainless, with a custom Blue Torch finish. The neck is a fluted Hand Bent hosel, and the medallion is a custom Damascus with the Dog & Ball trademark engraved through the torched acid etched polished finish.


[attachment=1166408:MP_M10_M_Bryan_12c.jpg]

[attachment=1166410:MP_M10_M_Bryan_12ch.jpg]

[attachment=1166412:MP_M10_M_Bryan_12f.jpg]

[attachment=1166414:MP_M10_M_Bryan_WIP_10s.jpg]


I hope you enjoy.

More updates to come on more custom work, and from the introduction of our new TMG grooves out on the PGA Tour at the Byron Nelson and the Colonial.

Thanks again for everyone's interest and support!

-Dave

[whatshannenin]

[quote name='DB MACHINE' timestamp='1337183535' post='4925148']
Thanks for all the positive comments everyone! It is great to hear positive reviews, and I know the whole team appreciates hearing your comments.

I'm back in the shop putting the finishing touches of some new Tour putters for the Byron Nelson, but thought I would take a moment to post some photos of another Custom MACHINE putter that recently went out to it's new home!

Please see attached photos of another Custom M10, this being an Adjuster model, in 303 stainless, with a custom Blue Torch finish. The neck is a fluted Hand Bent hosel, and the medallion is a custom Damascus with the Dog & Ball trademark engraved through the torched acid etched polished finish.


[attachment=1166408:MP_M10_M_Bryan_12c.jpg]

[attachment=1166410:MP_M10_M_Bryan_12ch.jpg]

[attachment=1166412:MP_M10_M_Bryan_12f.jpg]

[attachment=1166414:MP_M10_M_Bryan_WIP_10s.jpg]


I hope you enjoy.

More updates to come on more custom work, and from the introduction of our new TMG grooves out on the PGA Tour at the Byron Nelson and the Colonial.

Thanks again for everyone's interest and support!

-Dave
[/quote]



Sweet putter Dave! Love the Dog on the medallion. I'm bummed I'm not there this week or next to partake in the scenery and food at Cool River or Bob's!!!!

[blade_man]

[quote name='choeppner' timestamp='1335550466' post='4801488']
Hey Guys,

I hope everyone is had a great week this week We've almost made it to the weekend!!

I wanted to share some pics of another Custom MACHINE that was just completed and is now enroute to it's new owner

This is a Custom 5.0 MACHINE M1A Adjuster with a 1018 Carbon Head and a 1018 Carbon Shaft Over Modular Center Shaft Hosel. The Head and Neck were finished in our Hot Salts Gun Metal Blue Finish The Medallion is an Alloy Medallion.

Enjoy!!

-Chris

[attachment=1138584:MP_M1AF_M_Lonsdorf_12c.jpg]

[attachment=1138588:MP_M1AF_M_Lonsdorf_12f.jpg]

[attachment=1138590:MP_M1AF_M_Lonsdorf_12s.jpg]

[attachment=1138586:MP_M1AF_M_Lonsdorf_12ch.jpg

[attachment=1138592:MP_M1AF_M_Lonsdorf_12ad.jpg]
[/quote]

This is on the way to my front door and my bag!! Can't wait.................................I'm still waiting..........................still here.....

[w8liftr]

Beautiful putter.

[B-Man]

What's the new grip you guys have out there on Tour recently?

[attachment=1167902:2012-05-14 14.58.11.jpg]

[choeppner]

That's our new M Logo Lamkin Grip Offering

Here is another view of it

Thanks

-Chris

[attachment=1168130:MP_M_Logo_Lamkin_3GEN_Blu_Wht_Red_Slvr_F.jpg]

[choeppner]

Hey Guys,

 

I hope everyone is having a great day :) I wanted to share some pics of a Custom MACHINE that was just completed and heading to it's new owner :)

 

This is a 5.0 M2A Converter with a 303 Stainless Head and a 303 Stainless Fat Back Flange. The bumpers have been rounded for a smoother look :) The Medallion is a Black Anodized Alloy Medallion :) The Head Weight as pictured is 352 Grams :)

 

The weights on this Flange were hidden inside the flange and only visible when the flange is removed :)

 

Enjoy :)

 

-Chris

 

 

[whatshannenin]

Hey Guys,

 

I hope everyone is having a great day :) I wanted to share some pics of a Custom MACHINE that was just completed and heading to it's new owner :)

 

This is a 5.0 M2A Converter with a 303 Stainless Head and a 303 Stainless Fat Back Flange. The bumpers have been rounded for a smoother look :) The Medallion is a Black Anodized Alloy Medallion :) The Head Weight as pictured is 352 Grams :)

 

The weights on this Flange were hidden inside the flange and only visible when the flange is removed :)

 

Enjoy :)

 

-Chris

 

 

 

 

Is this a new Fatback flange? I didn't realize there were some without weights and only attachment screws? I know there are Double Fatbacks like that....I'm putting with the same head, but no rounding. Making everything. Like the anodized Medallions too!

[choeppner]

[quote name='whatshannenin' timestamp='1337985032' post='4978576']
Is this a new Fatback flange? I didn't realize there were some without weights and only attachment screws? I know there are Double Fatbacks like that....I'm putting with the same head, but no rounding. Making everything. Like the anodized Medallions too!
[/quote]

Hey Alex,

This was a 1-Off I'm putting with the same head too but with a HBH

Thanks

-Chris

[choeppner]

Hey Guys,

 

I hope everyone is having a great day and have a fun and safe Memorial Day weekend :) I wanted to share some pics of a Custom MACHINE that was just completed for a customer. This MACHINE was sent in for a Refinish and the customer wanted to change the neck to a 1018 Carbon Hand Bent Hosel and changed the flange to a 1018 Carbon Tongue Back Flange with Reverse Wave Cut Milling :) The Head, Neck and Flange have all been finished in our Hot Salts Gun Metal Blue Finish :)

 

Enjoy!

 

-Chris

 

 

 

 

 

[w8liftr]

Someone has good taste! Nice putter.

[choeppner]

Thanks Tommy Thought one with that flange might catch your eye. LOL

Hope you had a great Memorial Day Weekend

Thanks

-Chris

[choeppner]

Hey Guys,

 

I hope everyone had a GREAT Wednesday!

 

I wanted to share some Work in Progress Photo's with you of a Custom MACHINE M1A Garage Putter :)

 

This MACHINE features a 303 Stainless 5.0 M1A Adjuster Head with Custom Hand Hammered Stars and Hand Hammered Peening.

 

The Neck on this MACHINE is a 303 Stainless Disco Ball Hand Bent Hosel.

 

The Bumpers on the head have been melted for a smoother, more flowing look.

 

This MACHINE also features a Custom Mokume Gane Medallion :)

 

I look forward to hearing your thoughts :)

 

Thanks in advance

 

-Chris

 

[choeppner]

Hey Guys :)

 

I hope everyone is having a great day :) I wanted to share with you some Work In Progress Pics of a Custom MACHINE Damascus Putter :)

 

This MACHINE Features a Custom Left Handed Damascus Steel M1A Adjuster Head with a Custom Damascus Steel Disco Ball Hand Bent Hosel. The Bumpers on this MACHINE have been melted for a Smoother, more Rounded look :)

 

This MACHINE also features a custom Triangle Sight Dot.

 

Still alot of work to go on this MACHINE, but she is coming along nicely :)

 

I look forward to hearing your thoughts :)

 

Thanks in advance

 

-Chris