Best Driver of 2019 | Full Article _HERE_ | Discussion Thread _HERE_

Diamana ZF Photos and Info

TollBrosTollBros Overseer of the Test RangeSponsors Posts: 4,980 ✭✭✭✭✭✭✭
edited Aug 30, 2019 8:28pm in WRX Club Techs #1

Some pics of the new Diamana ZF coming out soon. This thing is absolutely GORGEOUS. Silver ion plating and prism graphics. I think everyone in the facility wanted one the second they showed up for testing. Truly an A+ from Mitsubishi on this one.

I will put up some testing info soon. Overall, very positive.

And YES we have them for sale right now. DM for pricing and availability.

For the first time ever, Mitsubishi Chemical is adding a fourth profile to their popular Diamana™ Fourth Generation Series. The new Diamana™ ZF builds on the success of the Diamana™ BF and provides the perfect option for players looking to push their distance farther.

“Diamana™ ZF-Series takes the signature ‘smooth’ bend profile that makes our BF-Series the shaft of choice for so many players and pushes it in just the right places,” says Mark Gunther, Vice President of Sales and Marketing for MCA GOLF. “The result is a profile that makes ZF a little more explosive and easier to accelerate.”

Like all of their Diamana™ Fourth Generation Series predecessors, Diamana™ ZF shafts owe their carefully calibrated stiffness and stability to two unique technologies: MR70 carbon fiber material, and Boron fiber.

MR70, used in both the butt and tip sections, is 20% stronger than conventional materials, with a 10% greater modulus (a measure of stiffness). This is bolstered by Boron fiber in the tip section to create the exact EI curve desired.

When compared to Diamana™ BF-Series, the Diamana™ ZF-Series shafts are a moderately stronger and more stable in both the butt and tip ends, with a slightly softer and more active middle for better energy transfer and acceleration. This produces a shaft that is incredibly solid during transition at the top of the swing and through impact, but with smooth speed and a lively feel.

Adding to the excitement around Diamana™ ZF-Series is the inclusion of 40g version, the lightest Fourth Generation Shaft offered to date.

“We’re extremely happy to have a 40g option within Diamana™ ZF,” says Gunther. “This opens the performance benefits of these unique Mitsubishi Chemical materials to a whole new range of players who prefer to play an ultra-lightweight shaft.”

Diamana™ ZF-Series are ideal for any player looking to increase clubhead acceleration while maintaining stability and control through impact.



http://www.golfwrx.com/forums/forum/608-greengrassevaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.
Post edited by TollBros on
«1

Comments

  • RainShadowRainShadow Tucson AZ (for now)Members Posts: 3,922 ✭✭✭✭✭✭✭

    Is this to be another Blueboard profile?

    Ping G400 10.5 Hzrdus Yellow 75 6.0
    Rogue 17* Atmos Blue TS or Xhot 15* OG Blueboard 73s
    G 410 19* & 22*  Tensei Pro Blue 80s
    Apex 26 Kuro Kage S
    Cobra Forged Tec Black 6-GW Modus 105s 
    RTX4 54/10 and 58/8 2 dots
    Bettinardi BB1/ Toulon Madison H1 neck (L)
    Some kind of 3 or 4 piece urethane covered soft feeling ball
  • wellthenjakewellthenjake San DiegoMembers Posts: 23 ✭✭

    Just got to try this shaft and it is definitely going straight into my driver. Love it.

  • TollBrosTollBros Overseer of the Test Range Sponsors Posts: 4,980 ✭✭✭✭✭✭✭

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    http://www.golfwrx.com/forums/forum/608-greengrassevaluationscom/

    Please click the link above for our Sponsor area with rare and Tour only products.
  • hargraves1066hargraves1066 Orlando FLMembers Posts: 22 ✭✭

    Can’t wait for this one to show up at the door step

  • Red4282Red4282 Members Posts: 431 ✭✭✭✭

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

  • hargraves1066hargraves1066 Orlando FLMembers Posts: 22 ✭✭

    @Red4282 said:

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

    Looks like on paper it has similar EI profile to the Ventus blue, being mid lauch and low spin. I've tried the 7X in the Ventus blue and just ordered a 70TX ZF so I'm interested to compare. The smoothness of a Diamana is hard to beat

  • noodle3872noodle3872 Chilliwack B.C. CanadaMembers Posts: 2,792 ✭✭✭✭✭✭✭

    @hargraves1066 said:

    @Red4282 said:

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

    Looks like on paper it has similar EI profile to the Ventus blue, being mid lauch and low spin. I've tried the 7X in the Ventus blue and just ordered a 70TX ZF so I'm interested to compare. The smoothness of a Diamana is hard to beat

    Except the Ventus Blue has a soft butt section. Either way, the ZF should be crazy popular!

    Taylormade M6 driver MCA Tensei CK Pro Blue 60 S Flex
    Taylormade M6 fairway wood MCA Tensei CK Pro Blue 70 S Flex
    Taylormade M4 19° hybrid MCA OT Tour Hybrid 80 S Flex
    Taylormade M4 22° hybrid MCA OT Tour Hybrid 90 S Flex
    Mizuno JPX 919 Hot Metal Pro 5-PW Modus3 Tour 105 S flex
    Mizuno S18 Gunmetal Wedges 50-07, 54-12, 58-12 and 62-08 Modus3 115 Wedge
    Scotty Cameron Futura 5.5M
    Scotty Cameron Futura 7M
    Titleist Yellow Pro V1
  • hargraves1066hargraves1066 Orlando FLMembers Posts: 22 ✭✭

    @noodle3872 said:

    @hargraves1066 said:

    @Red4282 said:

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

    Looks like on paper it has similar EI profile to the Ventus blue, being mid lauch and low spin. I've tried the 7X in the Ventus blue and just ordered a 70TX ZF so I'm interested to compare. The smoothness of a Diamana is hard to beat

    Except the Ventus Blue has a soft butt section. Either way, the ZF should be crazy popular!

    Yup, was a little too soft for my liking. Agreed on ZF, expect to see it in many bags come September.

  • TollBrosTollBros Overseer of the Test Range Sponsors Posts: 4,980 ✭✭✭✭✭✭✭

    @hargraves1066 said:

    @noodle3872 said:

    @hargraves1066 said:

    @Red4282 said:

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

    Looks like on paper it has similar EI profile to the Ventus blue, being mid lauch and low spin. I've tried the 7X in the Ventus blue and just ordered a 70TX ZF so I'm interested to compare. The smoothness of a Diamana is hard to beat

    Except the Ventus Blue has a soft butt section. Either way, the ZF should be crazy popular!

    Yup, was a little too soft for my liking. Agreed on ZF, expect to see it in many bags come September.

    We've had 16 orders just since Tuesday morning for these. By far the hottest Diamana release in awhile for us.

    http://www.golfwrx.com/forums/forum/608-greengrassevaluationscom/

    Please click the link above for our Sponsor area with rare and Tour only products.
  • gioguy21gioguy21 NJMembers Posts: 8,053 ✭✭✭✭✭✭✭

    Toll - hows this compare to my current fuji pro 2.0 TS?

    Epic Flash SZ / 9* (set D/S) / Fujikura Pro 2.0 TS 6X tipped 1.50"
    Epic Flash SZ / 3+ (set -1/N) / HZRDUS Smoke Black 75g 6.5 tipped 2"
    Epic CF17 3i / Tensei PW Hybrid 100TX
    Apex MB Chrome / 4-PW / Modus 130 X
    MD4 Chrome / 52, 56, 60 / DG 115 S200 (for now)
    Piretti Tour 801R / 35.5"

  • huckitchuckithuckitchuckit California Members Posts: 85 ✭✭✭

    My new favorite shaft by a long shot.

  • TollBrosTollBros Overseer of the Test Range Sponsors Posts: 4,980 ✭✭✭✭✭✭✭

    @gioguy21 said:
    Toll - hows this compare to my current fuji pro 2.0 TS?

    Your 2.0 is really more like a Tensei Pro White in that the handle is soft and the tip is quite stiff, with the mid section also being pretty tight. ZF is stiff tip, stiff handle, but with a mid section that is softer and loads up more. What it reminds me of when I hit it is sort of a blueboard/whiteboard type combo. Low spin, mid launch, smoother feeling. It's unique in a very positive way.

    http://www.golfwrx.com/forums/forum/608-greengrassevaluationscom/

    Please click the link above for our Sponsor area with rare and Tour only products.
  • gioguy21gioguy21 NJMembers Posts: 8,053 ✭✭✭✭✭✭✭

    @TollBros said:

    @gioguy21 said:
    Toll - hows this compare to my current fuji pro 2.0 TS?

    Your 2.0 is really more like a Tensei Pro White in that the handle is soft and the tip is quite stiff, with the mid section also being pretty tight. ZF is stiff tip, stiff handle, but with a mid section that is softer and loads up more. What it reminds me of when I hit it is sort of a blueboard/whiteboard type combo. Low spin, mid launch, smoother feeling. It's unique in a very positive way.

    intrigued - i liked the DF a lot - but in order to get the feel i was looking for i had to tip it quite a bit. is the ZF similar in that aspect? how stiff is the tip section?

    Epic Flash SZ / 9* (set D/S) / Fujikura Pro 2.0 TS 6X tipped 1.50"
    Epic Flash SZ / 3+ (set -1/N) / HZRDUS Smoke Black 75g 6.5 tipped 2"
    Epic CF17 3i / Tensei PW Hybrid 100TX
    Apex MB Chrome / 4-PW / Modus 130 X
    MD4 Chrome / 52, 56, 60 / DG 115 S200 (for now)
    Piretti Tour 801R / 35.5"

  • TollBrosTollBros Overseer of the Test Range Sponsors Posts: 4,980 ✭✭✭✭✭✭✭

    @gioguy21 said:

    @TollBros said:

    @gioguy21 said:
    Toll - hows this compare to my current fuji pro 2.0 TS?

    Your 2.0 is really more like a Tensei Pro White in that the handle is soft and the tip is quite stiff, with the mid section also being pretty tight. ZF is stiff tip, stiff handle, but with a mid section that is softer and loads up more. What it reminds me of when I hit it is sort of a blueboard/whiteboard type combo. Low spin, mid launch, smoother feeling. It's unique in a very positive way.

    intrigued - i liked the DF a lot - but in order to get the feel i was looking for i had to tip it quite a bit. is the ZF similar in that aspect? how stiff is the tip section?

    Tip stiffness is close to the DF. However the butt is much stiffer. I think you'll find it feels more stable overall just because of the stiffness in the handle.

    http://www.golfwrx.com/forums/forum/608-greengrassevaluationscom/

    Please click the link above for our Sponsor area with rare and Tour only products.
  • gioguy21gioguy21 NJMembers Posts: 8,053 ✭✭✭✭✭✭✭

    @TollBros said:

    @gioguy21 said:

    @TollBros said:

    @gioguy21 said:
    Toll - hows this compare to my current fuji pro 2.0 TS?

    Your 2.0 is really more like a Tensei Pro White in that the handle is soft and the tip is quite stiff, with the mid section also being pretty tight. ZF is stiff tip, stiff handle, but with a mid section that is softer and loads up more. What it reminds me of when I hit it is sort of a blueboard/whiteboard type combo. Low spin, mid launch, smoother feeling. It's unique in a very positive way.

    intrigued - i liked the DF a lot - but in order to get the feel i was looking for i had to tip it quite a bit. is the ZF similar in that aspect? how stiff is the tip section?

    Tip stiffness is close to the DF. However the butt is much stiffer. I think you'll find it feels more stable overall just because of the stiffness in the handle.

    that wouldn't be a bad thing to be honest...hmm. so it would feel like a more stable yet, a bit more load-feel, with similar spin? (ie a bit of launch with more stable feel and similar spin)...could be good.

    Epic Flash SZ / 9* (set D/S) / Fujikura Pro 2.0 TS 6X tipped 1.50"
    Epic Flash SZ / 3+ (set -1/N) / HZRDUS Smoke Black 75g 6.5 tipped 2"
    Epic CF17 3i / Tensei PW Hybrid 100TX
    Apex MB Chrome / 4-PW / Modus 130 X
    MD4 Chrome / 52, 56, 60 / DG 115 S200 (for now)
    Piretti Tour 801R / 35.5"

  • TollBrosTollBros Overseer of the Test Range Sponsors Posts: 4,980 ✭✭✭✭✭✭✭

    @gioguy21 said:

    @TollBros said:

    @gioguy21 said:

    @TollBros said:

    @gioguy21 said:
    Toll - hows this compare to my current fuji pro 2.0 TS?

    Your 2.0 is really more like a Tensei Pro White in that the handle is soft and the tip is quite stiff, with the mid section also being pretty tight. ZF is stiff tip, stiff handle, but with a mid section that is softer and loads up more. What it reminds me of when I hit it is sort of a blueboard/whiteboard type combo. Low spin, mid launch, smoother feeling. It's unique in a very positive way.

    intrigued - i liked the DF a lot - but in order to get the feel i was looking for i had to tip it quite a bit. is the ZF similar in that aspect? how stiff is the tip section?

    Tip stiffness is close to the DF. However the butt is much stiffer. I think you'll find it feels more stable overall just because of the stiffness in the handle.

    that wouldn't be a bad thing to be honest...hmm. so it would feel like a more stable yet, a bit more load-feel, with similar spin? (ie a bit of launch with more stable feel and similar spin)...could be good.

    Let me know if you'd like to give one a roll.

    http://www.golfwrx.com/forums/forum/608-greengrassevaluationscom/

    Please click the link above for our Sponsor area with rare and Tour only products.
  • Krt22Krt22 East BayMembers Posts: 7,496 ✭✭✭✭✭✭✭

    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

  • BCABCA Houston, TXMembers Posts: 53 ✭✭

    @TollBros said:

    @hargraves1066 said:

    @noodle3872 said:

    @hargraves1066 said:

    @Red4282 said:

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

    Looks like on paper it has similar EI profile to the Ventus blue, being mid lauch and low spin. I've tried the 7X in the Ventus blue and just ordered a 70TX ZF so I'm interested to compare. The smoothness of a Diamana is hard to beat

    Except the Ventus Blue has a soft butt section. Either way, the ZF should be crazy popular!

    Yup, was a little too soft for my liking. Agreed on ZF, expect to see it in many bags come September.

    We've had 16 orders just since Tuesday morning for these. By far the hottest Diamana release in awhile for us.

    Pardon my ignorance but how do I view your products/inventory and place an order? I've clicked the link in your post, which appears to just take me to your area of the forum, but I still can't see anything other than your posts about certain products. I also tried Google to no avail. Thanks for your help.

    Ping G410 10.5* Tour 65
    Callaway XR 16 17* Kai'li 70
    Titleist 816 H1 19* Motore Speeder 8.8
    Titleist 818 H1 22* Fujikura Atmos TS Blue 8
    Mizuno JPX 919 Hot Metal Pro 5-PW Modus 105
    Ping Glide 3.0 50* Modus 105
    Vokey SM6 56*-14 & Wedgeworks K 60*-06
    Cameron T22 Newport II 34" or Studio Style Newport 2 34"
  • hargraves1066hargraves1066 Orlando FLMembers Posts: 22 ✭✭

    @BCA said:

    @TollBros said:

    @hargraves1066 said:

    @noodle3872 said:

    @hargraves1066 said:

    @Red4282 said:

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

    Looks like on paper it has similar EI profile to the Ventus blue, being mid lauch and low spin. I've tried the 7X in the Ventus blue and just ordered a 70TX ZF so I'm interested to compare. The smoothness of a Diamana is hard to beat

    Except the Ventus Blue has a soft butt section. Either way, the ZF should be crazy popular!

    Yup, was a little too soft for my liking. Agreed on ZF, expect to see it in many bags come September.

    We've had 16 orders just since Tuesday morning for these. By far the hottest Diamana release in awhile for us.

    Pardon my ignorance but how do I view your products/inventory and place an order? I've clicked the link in your post, which appears to just take me to your area of the forum, but I still can't see anything other than your posts about certain products. I also tried Google to no avail. Thanks for your help.

    Just PM JT (Toll) and he’ll send you pricing , inventory, etc. That’s how I ordered mine 👌

  • jgard320jgard320 ClubWRX Posts: 429 ClubWRX

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Opposite type of profile. ZF: stiff butt softer mid, PO: soft butt stiff mid. Not sure just how each section frequencies though.

  • hargraves1066hargraves1066 Orlando FLMembers Posts: 22 ✭✭

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Not counterbalanced on ZF - it’s built off the BF profile, sounds like they moved around the MR70 carbon and boron to make tip and butt a stiffer profile with softer mid for smooth loading. I personally found that I had to exert a lot of energy to load the Tensei PO - I’m expecting the ZF to be the opposite. Diamana profiles I’ve found to be more a balance between smooth and stable.

  • ValtielValtiel Konica-Minolta Bizhub Members Posts: 2,401 ✭✭✭✭✭✭

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    I wouldn't be surprised if it was, stiffer butt sections usually require more material which = more weight.

    It is interesting, although not surprising, that the stiff/soft/stiff design is getting even more attention. It basically put Fujikura, Graphite Design, and Oban on the map and I imagine this is calculated given that Project X seems to have thrown a lot of their weight into the stiff mid designs with most of the HZRDUS line.

    Mizuno ST190 9.5* Diamana X'17 70xx || Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX
    Callaway XHot 3Deep Pro 14.5* FujikuraMotore VC 8.3 Tour Spec X || Nike SQ2 13* DiamanaBlueboard 83x
    Nike Tour Issue SQ2 17* Diamana Blueboard 103x || SQ2 15* Diamana Blueboard 93x
    PING Anser 20* Aldila Rogue Black 110MSI 105h Tour-X || Taylormade V-Steel 21* Project X Rifle Satin 6.5
    Mizuno MP-H4 3i 21* Project X PXi 7.0
    Mizuno MP-H4 4i 24* Project X PXi 7.0
    Mizuno MP-59 4i-PW 24*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey  SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision FCM 7.3 SSx1
    Vokey Special 62* Black Oxide V-Grind Brunswick Precision FCM 7.3 SSx2
    Scotty Cameron Santa Fe Bullseye shaft

    WITB Thread
  • Red4282Red4282 Members Posts: 431 ✭✭✭✭
    edited Sep 6, 2019 11:17am #24

    @jgard320 said:

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Opposite type of profile. ZF: stiff butt softer mid, PO: soft butt stiff mid. Not sure just how each section frequencies though.

    Im curious on what the differences in the zf and mcas blue profile are as they both sound very similar,soft mids. zf maybe stiffer in the tip?

  • hargraves1066hargraves1066 Orlando FLMembers Posts: 22 ✭✭

    @Red4282 said:

    @jgard320 said:

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Opposite type of profile. ZF: stiff butt softer mid, PO: soft butt stiff mid. Not sure just how each section frequencies though.

    Im curious on what the differences in the zf and mcas blue profile are as they both sound very similar,soft mids. zf maybe stiffer in the tip?

    Slightly different profile on Pro Blue, higher spin compared to ZF. Different materials and technology in these 2 as well - I believe one of big differences in the tip is the use of MR70 in the ZF which is a much stronger than the carbon used in Pro Blue and with lower modulus. To my knowledge Diamana is MCA’s flagship product so more selective in materials, etc - I even think Diamana is completely made in Japan where Tensei is China.

  • Red4282Red4282 Members Posts: 431 ✭✭✭✭
    edited Sep 6, 2019 12:45pm #26

    @hargraves1066 said:

    @Red4282 said:

    @jgard320 said:

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Opposite type of profile. ZF: stiff butt softer mid, PO: soft butt stiff mid. Not sure just how each section frequencies though.

    Im curious on what the differences in the zf and mcas blue profile are as they both sound very similar,soft mids. zf maybe stiffer in the tip?

    Slightly different profile on Pro Blue, higher spin compared to ZF. Different materials and technology in these 2 as well - I believe one of big differences in the tip is the use of MR70 in the ZF which is a much stronger than the carbon used in Pro Blue and with lower modulus. To my knowledge Diamana is MCA’s flagship product so more selective in materials, etc - I even think Diamana is completely made in Japan where Tensei is China.

    What about the bf? And from what i understood, the tensei non pro is china, but pro is japan

  • hargraves1066hargraves1066 Orlando FLMembers Posts: 22 ✭✭

    @Red4282 said:

    @hargraves1066 said:

    @Red4282 said:

    @jgard320 said:

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Opposite type of profile. ZF: stiff butt softer mid, PO: soft butt stiff mid. Not sure just how each section frequencies though.

    Im curious on what the differences in the zf and mcas blue profile are as they both sound very similar,soft mids. zf maybe stiffer in the tip?

    Slightly different profile on Pro Blue, higher spin compared to ZF. Different materials and technology in these 2 as well - I believe one of big differences in the tip is the use of MR70 in the ZF which is a much stronger than the carbon used in Pro Blue and with lower modulus. To my knowledge Diamana is MCA’s flagship product so more selective in materials, etc - I even think Diamana is completely made in Japan where Tensei is China.

    What about the bf? And from what i understood, the tensei non pro is china, but pro is japan

    From what I’m gathering, ZF was built off the BF’s smoothness so I expect it have the overall similar feel but lower spin. JT said it feels catapult like but with stability. Itching for mine to arrive.

  • gioguy21gioguy21 NJMembers Posts: 8,053 ✭✭✭✭✭✭✭

    @hargraves1066 said:

    @Red4282 said:

    @hargraves1066 said:

    @Red4282 said:

    @jgard320 said:

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Opposite type of profile. ZF: stiff butt softer mid, PO: soft butt stiff mid. Not sure just how each section frequencies though.

    Im curious on what the differences in the zf and mcas blue profile are as they both sound very similar,soft mids. zf maybe stiffer in the tip?

    Slightly different profile on Pro Blue, higher spin compared to ZF. Different materials and technology in these 2 as well - I believe one of big differences in the tip is the use of MR70 in the ZF which is a much stronger than the carbon used in Pro Blue and with lower modulus. To my knowledge Diamana is MCA’s flagship product so more selective in materials, etc - I even think Diamana is completely made in Japan where Tensei is China.

    What about the bf? And from what i understood, the tensei non pro is china, but pro is japan

    From what I’m gathering, ZF was built off the BF’s smoothness so I expect it have the overall similar feel but lower spin. JT said it feels catapult like but with stability. Itching for mine to arrive.

    i won't lie i'm contemplating one as well.

    Epic Flash SZ / 9* (set D/S) / Fujikura Pro 2.0 TS 6X tipped 1.50"
    Epic Flash SZ / 3+ (set -1/N) / HZRDUS Smoke Black 75g 6.5 tipped 2"
    Epic CF17 3i / Tensei PW Hybrid 100TX
    Apex MB Chrome / 4-PW / Modus 130 X
    MD4 Chrome / 52, 56, 60 / DG 115 S200 (for now)
    Piretti Tour 801R / 35.5"

  • BCABCA Houston, TXMembers Posts: 53 ✭✭

    @hargraves1066 said:

    @BCA said:

    @TollBros said:

    @hargraves1066 said:

    @noodle3872 said:

    @hargraves1066 said:

    @Red4282 said:

    @TollBros said:

    @RainShadow said:
    Is this to be another Blueboard profile?

    No. It's stiffer in tip and butt with a softer mid section. It has a great sensation to it. Almost like a catepult. Launch is similar to a blueboard but the spin is lower. Very unique profile but something very satisfying in terms of feel.

    Sounds like mca’s competition to the ventus..?

    Looks like on paper it has similar EI profile to the Ventus blue, being mid lauch and low spin. I've tried the 7X in the Ventus blue and just ordered a 70TX ZF so I'm interested to compare. The smoothness of a Diamana is hard to beat

    Except the Ventus Blue has a soft butt section. Either way, the ZF should be crazy popular!

    Yup, was a little too soft for my liking. Agreed on ZF, expect to see it in many bags come September.

    We've had 16 orders just since Tuesday morning for these. By far the hottest Diamana release in awhile for us.

    Pardon my ignorance but how do I view your products/inventory and place an order? I've clicked the link in your post, which appears to just take me to your area of the forum, but I still can't see anything other than your posts about certain products. I also tried Google to no avail. Thanks for your help.

    Just PM JT (Toll) and he’ll send you pricing , inventory, etc. That’s how I ordered mine 👌

    Thanks for the info. I just figured there was a website but perhaps not.

    Ping G410 10.5* Tour 65
    Callaway XR 16 17* Kai'li 70
    Titleist 816 H1 19* Motore Speeder 8.8
    Titleist 818 H1 22* Fujikura Atmos TS Blue 8
    Mizuno JPX 919 Hot Metal Pro 5-PW Modus 105
    Ping Glide 3.0 50* Modus 105
    Vokey SM6 56*-14 & Wedgeworks K 60*-06
    Cameron T22 Newport II 34" or Studio Style Newport 2 34"
  • jgard320jgard320 ClubWRX Posts: 429 ClubWRX

    It's looking like the ultimate fairway profile for me. I actually really enjoyed the stock hzrdus yellow that came in a lot of last year's models. This seems like a similar concept with less on the extreme ends and better quality materials.

  • TollBrosTollBros Overseer of the Test Range Sponsors Posts: 4,980 ✭✭✭✭✭✭✭

    @Red4282 said:

    @jgard320 said:

    @Krt22 said:
    Counter balanced at all? Seems like a tensei PO with a stiffer handle?

    Opposite type of profile. ZF: stiff butt softer mid, PO: soft butt stiff mid. Not sure just how each section frequencies though.

    Im curious on what the differences in the zf and mcas blue profile are as they both sound very similar,soft mids. zf maybe stiffer in the tip?

    It's stiffer in the tip, with Mr70 fiber. More like the tip of Pro Orange.

    http://www.golfwrx.com/forums/forum/608-greengrassevaluationscom/

    Please click the link above for our Sponsor area with rare and Tour only products.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file