Seemore Putters - Anyone?

1356712

Comments

  • SeeMore PuttersSeeMore Putters Sponsors Posts: 609 ✭✭


    I was fitted by a certified Seemore instructor and have not looked at another putter since 2013




    buckaroo279 - fantastic! Thanks for being a part of team SeeMore!!
  • SurfDufferSurfDuffer Members Posts: 3,008 ✭✭
    I've been playing the SeeMore original FPG for a few years now and it has always been a terrific putter. A couple of weeks back I switched the grip to a SuperStroke 3.0 and added some lead tape to make the head feel a little heavier and now this thing is just plane deadly
    _____________________________________________

    Titleist 915 D2 60gX Rogue Silver
    Titleist 906F2 13* ProForce V2 90gX
    Titleist 690mb 2-P 6.0PX
    Titleist Vokey 52* and 58*
    SeeMore FPG Putter
  • TundraToadTundraToad Members Posts: 221 ✭✭
    I have a mFGP2 Limited 1st Run (204 of 250) putter I bought off someone here on GolfWRX when it was 1st released. After putting a while with it the set-up was all wrong for me. Contacted SeeMore and they were outstanding in helping me and when I got it back from them they even put on a new headcover for no charge. Great Company.





    Now for the bad news, it sits in a closest because I cannot putt with it. No idea why as it sits perfect, swings nice and has great feel, I just can't make putts. Guessing its the center shaft design. On a quiet night you can hear it crying asking for another chance. image/taunt.gif' class='bbc_emoticon' alt=':taunt:' />
  • kenstlkenstl Members Posts: 422 ✭✭
    I switched over t a seemore FGP (brass) at the beginning of last year and my putting is better than it has ever been. I picked up a used one to try it out, it had been painted black by the previous owner. After liking it, I ended up having the head stripped down and buffed out, and the inlay areas antiqued for the contrast on the alignment lines. I then sent it off to seemore and they restarted the putter to 37". Great service by seemore, they were very helpful in assisting in the set up of the putter.



    Over the last couple of years I had tried a number of different putters and putting styles, including face on putting. I have stuck with the FGP for 1.5 seasons so far and my putting numbers are drastically better. Maybe someday I'll go through a seemore fitting as I have become a believer in their alignment and stroke system
    Cobra LTD Driver
    Wishon 929 4 wood
    SL Sterling Irons 5-LW
    Evnroll Arm Lock Putter
  • kess13kess13 So I just put the ball in the hole... Members Posts: 1,278 ✭✭
    Father in law invited me to his annual member/guest this week for the first time. We started slow the first day but the seemore got hot on the second day and we were able to grind back to the middle of the pack. On the third day the greens were rolling at a 12 or so per the pros. We had a number in our head going into the final round and positioned ourselves well going into the last match of the week. On the last hole I was giving a stroke to everyone in the group and they were all looking at short bogey putts on a tough par 5. I was just off the back edge in 3 and had a foot of rough and then 12ft to a hole running away from me. Tapped it with the seemore just enough to get it out of the grass and we all watched it lazily roll down and drop in the cup to win the last hole for a point. We took our flight by a point. I was nervous about bringing the seemore out for a tournament with so little practice with it, but it has earned it's spot in my bag. Great putter.
    Bio Cell
    F6 baffler
    MP54
    T7/eye2XG Lob
    Mills Ming
  • SeeMore PuttersSeeMore Putters Sponsors Posts: 609 ✭✭
    kess13 wrote:


    Father in law invited me to his annual member/guest this week for the first time. We started slow the first day but the seemore got hot on the second day and we were able to grind back to the middle of the pack. On the third day the greens were rolling at a 12 or so per the pros. We had a number in our head going into the final round and positioned ourselves well going into the last match of the week. On the last hole I was giving a stroke to everyone in the group and they were all looking at short bogey putts on a tough par 5. I was just off the back edge in 3 and had a foot of rough and then 12ft to a hole running away from me. Tapped it with the seemore just enough to get it out of the grass and we all watched it lazily roll down and drop in the cup to win the last hole for a point. We took our flight by a point. I was nervous about bringing the seemore out for a tournament with so little practice with it, but it has earned it's spot in my bag. Great putter.




    Thought we heard you yesterday making that putt - Nashville image/smile.png' class='bbc_emoticon' alt=':)' />)!! Well done! Always happy to help.
  • edgeratedgerat ClubWRX Posts: 149 ClubWRX
    This is a bit of a silly question but, what is the difference between all the different "lines" of putters? Studio, Milled, Private Reserve, etc. Looking for a 100% milled FGP version, don't want to spend more than I "need" to and don't want to not get the best
  • SeeMore PuttersSeeMore Putters Sponsors Posts: 609 ✭✭
    edgerat wrote:


    This is a bit of a silly question but, what is the difference between all the different "lines" of putters? Studio, Milled, Private Reserve, etc. Looking for a 100% milled FGP version, don't want to spend more than I "need" to and don't want to not get the best




    Different finishes and different materials. At your convenience give us a call at 615-435-8015 and more than happy to walk you through everything. PR section are limited runs of heads that we get from time to time. Milled is 100% milled product and Studio series is our Nashville series that has a unique finish.
  • gruzgruz Members Posts: 204
    Anyone know which Seemore line of FGP would feel most like my milled Scotty Cameron GoLo S? It produces a beautiful smooth *click* at impact. I had an original brass fgp and I've never had a better stroke than with that putter, but the feel/sound was just dreadful... I recently tried the 303 milled FGP at my local Roger Dunn (used, no new Seemore's in stock), and it produced almost no sound at all, almost too smooth... Is there something in between? Maybe PTM1?
  • maxfli985maxfli985 Members Posts: 1,237
    I'm looking to move to one of the Giant series...probably M1t or FGPt...anyone able to tell me about them compared to old models? Also, let me know if you have one to sell me!
  • MedsonMedson Members Posts: 2,310 ✭✭
    I'm using a Giant FGP and had regular FGP in the past.



    Giant is ... giant. It's like putting with a brick. It's made from alumnus and has light milling. It feels very clicky. Nothing bad about clicky because milling is light. Take a little bit time to get used to.



    Hide the dot works. Mic drop.


    maxfli985 wrote:


    I'm looking to move to one of the Giant series...probably M1t or FGPt...anyone able to tell me about them compared to old models? Also, let me know if you have one to sell me!
  • maxfli985maxfli985 Members Posts: 1,237
    I played 9 w/ the old brass FGP i have 2 nights ago...made some great putts. I love the idea of the smaller giants....probably need to look at getting one.
  • SeeMore PuttersSeeMore Putters Sponsors Posts: 609 ✭✭
    maxfli985 wrote:


    I played 9 w/ the old brass FGP i have 2 nights ago...made some great putts. I love the idea of the smaller giants....probably need to look at getting one.




    Mini Giant, giant m1t and giant fgpt are awesome to look at! Give it a try when you see it.
  • kess13kess13 So I just put the ball in the hole... Members Posts: 1,278 ✭✭
    gruz wrote:


    Anyone know which Seemore line of FGP would feel most like my milled Scotty Cameron GoLo S? It produces a beautiful smooth *click* at impact. I had an original brass fgp and I've never had a better stroke than with that putter, but the feel/sound was just dreadful... I recently tried the 303 milled FGP at my local Roger Dunn (used, no new Seemore's in stock), and it produced almost no sound at all, almost too smooth... Is there something in between? Maybe PTM1?


    I own the carbon steel version of the fgp. It feels great but is definitely quiet and soft when properly struck. Having putted with many models at the store I'd say you are on the right track with the ptm1. I found it to be pleasantly firm.
    Bio Cell
    F6 baffler
    MP54
    T7/eye2XG Lob
    Mills Ming
  • kenstlkenstl Members Posts: 422 ✭✭
    kess13 wrote:
    gruz wrote:


    Anyone know which Seemore line of FGP would feel most like my milled Scotty Cameron GoLo S? It produces a beautiful smooth *click* at impact. I had an original brass fgp and I've never had a better stroke than with that putter, but the feel/sound was just dreadful... I recently tried the 303 milled FGP at my local Roger Dunn (used, no new Seemore's in stock), and it produced almost no sound at all, almost too smooth... Is there something in between? Maybe PTM1?


    I own the carbon steel version of the fgp. It feels great but is definitely quiet and soft when properly struck. Having putted with many models at the store I'd say you are on the right track with the ptm1. I found it to be pleasantly firm.




    Agree. I just added another FGP as I picked up a CS counterbalanced model and you are right, it can be quiet. I had a great first outing with it making a number of mid length putts. I love the FGP style

    Cobra LTD Driver
    Wishon 929 4 wood
    SL Sterling Irons 5-LW
    Evnroll Arm Lock Putter
  • irishrob9irishrob9 Members Posts: 45
    Gotta give SeeMore a customer service shoutout. Earlier this week I purchased a couple putters on their website. On one of them they didn't have the headcover I selected in stock. They emailed me but I didn't respond in time for them to deliver the putters before the weekend. B/c they wanted to make sure they were delivered on time, they included TWO other headcovers and said if I didn't like them they would send any other right away. Thoughtful and solid customer service if you ask me.



    Great putters and great company behind them....
  • chal0072chal0072 Members Posts: 341 ✭✭
    edited Jul 15, 2016 #78
    Didn't get fit and just bought Si5 34" now I think is too long. Is it okay to cut an inch off? Or do you recommend just putting longer grip like Super stroke 2.0XL and grip down on it.
    Post edited by Unknown User on
    Cobra King LTD Black
    Callaway Heavenwood 
    Callaway Apex CF16 3-P
    Cleveland RTX 50 56
    Taylormade Spider Black putter
  • maxfli985maxfli985 Members Posts: 1,237
    i just cut down a 37'' Giant m1t to 34'' and put a 140cc Golf Pride Tour Snsr Straight grip and it is money. I don't think cutting down is a problem unless Seemore put rear weights in the butt of the shaft....at 34 it's likely you dont have that issue.
  • GarrettFMGarrettFM Members Posts: 99
    edited Jul 16, 2016 #80
    New to this forum, don't have a huge amount to offer in terms of gear knowledge, but wanted to add my two cents about SeeMore. I recently rebuilt my set after about a decade of not playing much golf, and I struggled to find the right putter. I auditioned various mallets and blades, but I kept misjudging distance and missing four footers. Finally I tried an FGP Original at my local golf shop, and even though the alignment aids didn't exactly fit my set-up (I had always used a forward press, stood slightly open, and tilted my head to the right so that my sight line was behind the ball), I loved the feel, the weighting, the chrome polished sole, the overall look. Also, I found that my distance control was noticeably better than it was with any other putter I had tried.



    As I practiced with the FGP, I started experimenting with my set-up, just to see what would happen if I actually hid the dot. So I squared up my address, straightened out my head, and centered my sight line -- those adjustments were pretty easy. The most uncomfortable part was getting rid of my forward press; the beginning of my stroke didn't feel solid without it. But then I shifted my grip to quiet down my wrists, keeping it traditional but moving my hands a bit farther apart and using a strong extended right-hand index finger. Now I hide the dot every time, and my stroke feels square and sturdy. I'm rolling puts really, really well.



    So basically the FGP cleaned up my putting technique, which I hadn't expected but, as it turned out, definitely needed.



    A note on customer service: the golf shop where I bought the putter didn't have the right headcover, so they ordered one from SeeMore. They ended up ordering a mallet headcover by mistake. I called SeeMore, and (even though all of this was clearly the golf shop's fault) they said no problem, shipped me a new headcover, told me to keep the other one. Took two minutes. Now I feel genuinely invested in this small company. I'll probably buy a mallet to go with my extra headcover. You got me, SeeMore. Well done.
    Post edited by Unknown User on
    Twitter: @gfordgolf
  • kess13kess13 So I just put the ball in the hole... Members Posts: 1,278 ✭✭
    I put a salty grip on my seemore before playing this weekend. Had my 2 best putting rounds of the season. The light grip with the 340g head are just a wonderful combo for distance control and the larger grip keeps my hands quiet. Loving this setup!
    Bio Cell
    F6 baffler
    MP54
    T7/eye2XG Lob
    Mills Ming
  • MobMob Just Another Lefty Members Posts: 3,458 ✭✭
    Just played my first 2 rounds with the SeeMore Z3c and really putt pretty well with it. I like the center shaft, my first time playing one. I won't rave or gush about any club until it has been in my bag for a whole season. The honeymoon period has happened too many times to me.
  • OspreyCIOspreyCI Members Posts: 4,740 ✭✭
    edited Jul 19, 2016 #83
    I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.



    Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?



    Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
    Post edited by Unknown User on
    TM M6 10.5 GD AD DI Black 6
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    TM M3 4 Iron Atmos
    TM P790 5-AW Modus 105
    TM MG 54*
    TM HI TOE 60*
    TM MY Spider Tour Black
  • OspreyCIOspreyCI Members Posts: 4,740 ✭✭
    Went at lunch and demo'd the Corona Del Mar X3 and figured out the rst much better. Man I love that thing. Feels better than any SC I have owned!



    Golo 7 off to BST. A 34" Corona Del Mar X3 Rosemark 1.52 is calling my name.
    TM M6 10.5 GD AD DI Black 6
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    TM M3 4 Iron Atmos
    TM P790 5-AW Modus 105
    TM MG 54*
    TM HI TOE 60*
    TM MY Spider Tour Black
  • SeeMore PuttersSeeMore Putters Sponsors Posts: 609 ✭✭
    OspreyCI wrote:


    I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.



    Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?



    Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?




    Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.
  • OspreyCIOspreyCI Members Posts: 4,740 ✭✭

    OspreyCI wrote:


    I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.



    Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?



    Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?




    Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.


    Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?
    TM M6 10.5 GD AD DI Black 6
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    TM M3 4 Iron Atmos
    TM P790 5-AW Modus 105
    TM MG 54*
    TM HI TOE 60*
    TM MY Spider Tour Black
  • SeeMore PuttersSeeMore Putters Sponsors Posts: 609 ✭✭
    OspreyCI wrote:


    OspreyCI wrote:


    I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.



    Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?



    Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?




    Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.


    Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?


    The rosemark 1.52 is 57 grams - what was the grip that you demo'd (not a dumb question - always happy to help)
  • OspreyCIOspreyCI Members Posts: 4,740 ✭✭

    OspreyCI wrote:


    OspreyCI wrote:


    I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.



    Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?



    Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?




    Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.


    Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?


    The rosemark 1.52 is 57 grams - what was the grip that you demo'd (not a dumb question - always happy to help)


    Just a black grip that had SEEMORE on it.
    TM M6 10.5 GD AD DI Black 6
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    TM M3 4 Iron Atmos
    TM P790 5-AW Modus 105
    TM MG 54*
    TM HI TOE 60*
    TM MY Spider Tour Black
  • SeeMore PuttersSeeMore Putters Sponsors Posts: 609 ✭✭
    OspreyCI wrote:


    OspreyCI wrote:


    OspreyCI wrote:


    I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.



    Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?



    Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?




    Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.


    Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?


    The rosemark 1.52 is 57 grams - what was the grip that you demo'd (not a dumb question - always happy to help)


    Just a black grip that had SEEMORE on it.




    With a rosemark you the swing weight will increase by 2-3 swing weight points. Will make it feel a little heavier.
  • OspreyCIOspreyCI Members Posts: 4,740 ✭✭
    Thanks for the help. Appreciate that you guys are on here.
    TM M6 10.5 GD AD DI Black 6
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    TM M3 4 Iron Atmos
    TM P790 5-AW Modus 105
    TM MG 54*
    TM HI TOE 60*
    TM MY Spider Tour Black
  • mcc0819mcc0819 Members Posts: 591 ✭✭
    chuckgt3 wrote:


    Most responsive company in the business. Quality all the way!




    I had an issue and was replied to very quickly. But the reply came from Jim Grundberg, the CEO himself! What an amazing company and is run by quality guys! Thank you so much
    Ping G400 LST AD-DI 7x
    Callaway Rogue 3w HZRDUS Yellow 76 6.5
    Callaway Rogue 5w HZRDUS Yellow 76 6.5
    Ping i200 4-pw DG X100
    Ping Glide 2.0 50, 54, 58
    Odyssey O-Works 1w

Sign In or Register to comment.