Continental Golf - Refinishing and More!

[Continental Golf]

Justin, I have the 2014 golo 3

Russ, we could paint the whole putter and do the sole plate a different color or just refinish it and paint the sole plate a cool color. Here is an example of that.

[gioguy21]

Continental, can u please post a pic of a black M1 with a matte carbon crown??

s. Here is a black gloss M1 driver. We don't have any pictures of the matte carbon but it would look very similar to the cobra driver a couple posts up.

 

what would it cost me to get matte black/matte carbon on the top (with no alignment marker); and how fast of a turn around time?

[mizunoMP14]

Continental, can u please post a pic of a black M1 with a matte carbon crown??

s. Here is a black gloss M1 driver. We don't have any pictures of the matte carbon but it would look very similar to the cobra driver a couple posts up.

 

Can you paint the carbon? So it looks like a normal all metal driver?

[BirdieBob]

Continental, can u please post a pic of a black M1 with a matte carbon crown??

s. Here is a black gloss M1 driver. We don't have any pictures of the matte carbon but it would look very similar to the cobra driver a couple posts up.

 

 

 

May have to buy a M1 just so I can have it painted.

Just amazing!

[LudaCliff]

Hi, I really love the finish on these old Honma metal woods. I looks like a brushed stainless with clearcoat type finish. Kind of looks like more shiny/brilliant version of the original Titleist PT fairway woods, which I love as well. Are you able to replicate this finish on a modern driver/fairway? Thanks!

[Continental Golf]

Continental, can u please post a pic of a black M1 with a matte carbon crown??

s. Here is a black gloss M1 driver. We don't have any pictures of the matte carbon but it would look very similar to the cobra driver a couple posts up.

 

Can you paint the carbon? So it looks like a normal all metal driver?

We can do it a solid color or keep the carbon either is no issue at all.

[Continental Golf]

Hi, I really love the finish on these old Honma metal woods. I looks like a brushed stainless with clearcoat type finish. Kind of looks like more shiny/brilliant version of the original Titleist PT fairway woods, which I love as well. Are you able to replicate this finish on a modern driver/fairway? Thanks!

Most heads we can do something very similar to this but not all are possible. We were doing some clubs for Peanutsdaddy not very long ago and 2 of them we could have done that way but another had an odd finish underneath and we couldn't match them up close enough.

[PeanutsDaddy]

Luda,

 

I sent my Wishon woods to Continental and asked if they could strip all paint, leaving a metal crown with a clear coat. Here was the end result:

 

I think it's a pretty close match.

 

 

 

Looks stunning at address. Suprisingly, little glare in the sun.

 

Edit: So funny Justin. I was posting as you are.

 

Here is the other fairway wood Justin is referencing.

 

 

 

They don't look the same in the two photos, but this is mostly lighting. When the two heads are in the address position they are a very close match.

[LudaCliff]

Luda,

 

I sent my Wishon woods to Continental and asked if they could strip all paint, leaving a metal crown with a clear coat. Here was the end result:

 

I think it's a pretty close match.

 

 

 

Looks stunning at address. Suprisingly, little glare in the sun.

 

Edit: So funny Justin. I was posting as you are.

 

Here is the other fairway wood Justin is referencing.

 

 

 

They don't look the same in the two photos, but this is mostly lighting. When the two heads are in the address position they are a very close match.

 

Thanks Justin and PeanutsDaddy. The two woods look great. So both were just stripped and clear coated? Would it be possible to give the crown more of the "brushed" look with the grain going from front to back? I really like the look of a bare, no-paint finish. Thanks.

[Volgolfer]

Hello Continental Golf,

 

I've been searching the thread to see if there were examples of Bio Cell heads (not Bio Cell +) you've refinished but haven't seen any. Can you post some photos if you have them or point me to the post on GolfWRX/your website where they are?

 

Thanks

[sean_friedrich]

hey continental was wondering if it would be possible to do something like this to the cavity and slot on the sole of my nike vapor pro driver.

thanks

 

[Continental Golf]

hey continental was wondering if it would be possible to do something like this to the cavity and slot on the sole of my nike vapor pro driver.

thanks

 

We wouldnt be able to add a swoosh but could paint the cavity of the driver in a charcoal or black finish, hard to tell from the picture. The slot would have to be painted all the way down to the screw hole because we can't tape off in that area but we could make it a pattern so to speak on the the slot and make it look uniform no problem. The sole where its anodized we can't do at all though back to original of course. Feel free to pm me and I can get you a quote once you tell me everything you are looking for. Thanks!

[semper76fi]

Hello, Continental Golf. Would you be able to finish a forged Wilson Tour Special II in matte orange, but leave the face either raw or black oxide? Thank you, James

[smellysell]

Subscribed

[Continental Golf]

Hello, Continental Golf. Would you be able to finish a forged Wilson Tour Special II in matte orange, but leave the face either raw or black oxide? Thank you, James

We could leave it raw but we couldn't black oxide it because all the oil it puts in the putter we couldn't paint it with that. Feel free to PM me if you have any other questions or want to get a price on the project. Thanks and I hope everyone has a great weekend!

[Bob Booker]

I received my new Cobra Fly-Z Driver head with the same color scheme as my 3 wood - it looks great. Matte black crown with brushed metal face and underside. Here are some pictures of the two:

 

 

 

 

 

 

 

 

 

By the way, the finish on the three wood is holding up really well. No marks whatsoever on the crown yet.

[Old_Lefty]

Hello Centennial Golf

I have not read this entire thread , don't know if theis has been covered or not. Is there any refinishing options for a polished stainless steel iron head like the callaway xr irons?

thanks gb

[Continental Golf]

Sorry we don't do a refinishing of those type of irons with a plating.

[Continental Golf]

Wanted to show you guys a Sldr Grey M1 driver.

[Russ757]

Wanted to show you guys a Sldr Grey M1 driver.

 

Wow...

[ckay]

That looks money.

[breakfree40]

That makes me want to go buy a M1.......

[freddy1682]

Can you guys do anything with an old Reuter Bullseye putter in kinda rough shape?

[Continental Golf]

Can you guys do anything with an old Reuter Bullseye putter in kinda rough shape?

Freddy those putters are pretty soft so they ding up real easy. We can clean it up but I wouldn't get all the dings out because it would take to much material off the putter. We can make it look MUCH better for you though.

[bu11dog]

Can you guys do anything with an old Reuter Bullseye putter in kinda rough shape?

Freddy those putters are pretty soft so they ding up real easy. We can clean it up but I wouldn't get all the dings out because it would take to much material off the putter. We can make it look MUCH better for you though.

 

Could you mill the face on one?

[Continental Golf]

Can you guys do anything with an old Reuter Bullseye putter in kinda rough shape?

Freddy those putters are pretty soft so they ding up real easy. We can clean it up but I wouldn't get all the dings out because it would take to much material off the putter. We can make it look MUCH better for you though.

 

Could you mill the face on one?

We can no problem at all. We use the small milling which is probably best for this putter anyways but just letting you know. Thanks

[cradd10]

Wanted to show you guys a Sldr Grey M1 driver.

 

 

that looks killer. Solid work

[eddiebigeddie]

Continental, what can you guys do with the top of the Cobra King LTD to bring out the carbon fiber? similar to the M1?

[SweetTeaGolfer]

Have you refinished any Yes putters before? Looking to get a Tracy II redone.

[Whiskey_fire]

That M1 is freaking unreal