Help! Need a Source for Whipping

[Bigarch]

I'm sure this topic has been covered many times over, but I can't find a definitive answer. I just want to hear everyone's opinion and the sources that you all use. I'm talking about whipping for wooden headed clubs 1950's up until modern clubs. I always used the common waxy, shiny looking nylon whipping that you found on most golf clubs in the 70s and 80s. Ordered it from Hornungs, Golfworks or Golfsmith back then. That's what I learned to whip clubs with and that's what I'm looking for now...or as close to it as possible.

 

If I buy "bonded nylon thread" which can be found all over ebay for pretty cheap, what weight do I need? Does it look like what I described above?

 

If I order through Ashaway, who makes tons of different stuff, exactly which of their products am I looking for? Again, what looks most like what I described?

 

Is there someone out there I am missing as a source???

 

Where and what is your best source for golf club whipping?

[ProgMetaller]

I get mine from a place called Royalwood, Ltd.(Not sure if I can post a link to them on here, but it's easy enough to find online). It's only an hour away from me and close to where my sister lives, so I just go get it myself. They should have shipping though. Irish 4-ply waxed linen thread in any color that you could possibly want. 50-gram spools, about 90-100 yards.

[Fellaheen51]

Bought waxed linen thread at the following. The finished look was coarser than what I was after, but high quality.

 

http://hickorygolfworkshop.com/thread-head-covers.html

 

Found this equal to the above for my purposes and a whole lot cheaper. Slightly thinner diameter IMO. Worth a try to see if its the look you're after.

 

http://www.michaels.com/waxed-linen-cord/10268124.html?productsource=PDPZ1

 

Rod guide whipping thread will give you a very fine look. But not waxed.

[majic]

The whipping I think you want is from Ashaway and I think its about a 3 strand coated. The waxed is typically used on hickory but its not the best for hickory it should be "pitched" linen

[dbleag]

Ask any legitimate PGA Pro over 65 years old as they would be your best source for answers to your questions or could point you to someone who knows.

 

In their day, everyone on the golf staff had to learn and know how to rewhip and refinish.

[Bigarch]

Ask any legitimate PGA Pro over 65 years old as they would be your best source for answers to your questions or could point you to someone who knows.

 

In their day, everyone on the golf staff had to learn and know how to rewhip and refinish.

 

Thanks gang. I'm a 51 year old former PGA Professional and know how to get the job done, I just can't find a source for whipping. Getting tired of picking up junk clubs for $1 at the thrift store just so I can steal the whipping and possibly save a grip or shaft to reuse :)

[sdandrea]

Slight threadjack - can someone direct me to the best internet link for hickory whipping instructions? Thanks!

[dbleag]

Ask any legitimate PGA Pro over 65 years old as they would be your best source for answers to your questions or could point you to someone who knows.

 

In their day, everyone on the golf staff had to learn and know how to rewhip and refinish.

 

Thanks gang. I'm a 51 year old former PGA Professional and know how to get the job done, I just can't find a source for whipping. Getting tired of picking up junk clubs for $1 at the thrift store just so I can steal the whipping and possibly save a grip or shaft to reuse :)

 

https://www.ebay.com/itm/Waxed-Whipping-thread-for-wood-shaft-golf-clubs-BEST-IN-INDUSTRY-over-9-000-sold/292230758796?epid=600859185&hash=item440a4f818c:m:m6B6r4lnIgH9lUP-cRkLxbw

[Bigarch]

Ask any legitimate PGA Pro over 65 years old as they would be your best source for answers to your questions or could point you to someone who knows.

 

In their day, everyone on the golf staff had to learn and know how to rewhip and refinish.

 

Thanks gang. I'm a 51 year old former PGA Professional and know how to get the job done, I just can't find a source for whipping. Getting tired of picking up junk clubs for $1 at the thrift store just so I can steal the whipping and possibly save a grip or shaft to reuse :)

 

https://www.ebay.com...IgH9lUP-cRkLxbw

 

Yeah...that would do in a pinch. But I want something a little more finished looking and not so rustic. I really want to find something where you don't see the braid as much. Am I being too picky?

[Wriggles]

Bought waxed linen thread at the following. The finished look was coarser than what I was after, but high quality.

 

http://hickorygolfwo...ead-covers.html

 

Found this equal to the above for my purposes and a whole lot cheaper. Slightly thinner diameter IMO. Worth a try to see if its the look you're after.

 

http://www.michaels....uctsource=PDPZ1

 

Rod guide whipping thread will give you a very fine look. But not waxed.

 

So, Michaels' has the same kind of stuff I bought at Jo Ann. The MIchaels' store is a couple miles away, versus the Jo Ann which is about 10.

 

Thanks for the info.

[wkuo3]

I recalled some of these guys used fine nylon line ( black) in a jam when the traditional whipping was not available. I believe one of my driver was repaired that way when the whipping came loose at the driving range that day, a friend just took it in the back a whipped it with nylon line ( or something not waxed linen ) Think it held up well.

[HoldenCornfield]

Here's a link to a post I made about a year ago which links to a source for whipping for the OP (scroll down a bit) and also some how-to videos for sdrandea:

 

http://www.golfwrx.c.../#entry15290824

 

 

Here's a pic of what they look like installed on a MacGregor project I call "St Paddy's":

 

 

 

 

 

Just another great set I bought from Teevons. Thanks again, Tim.

[JoeGruen]

Hi Bigarch,

 

I know of two solutions, please see attached picture:

 

On the left, only for those with good practice in club - whipping: a bit tough to bend, definitely not for beginners.

O the right: Easy and smooth to work with, just ask your trustworthy lady of choice for sources.

 

Hope this helps, Joe

[majic]

Slight threadjack - can someone direct me to the best internet link for hickory whipping instructions? Thanks!

for hickory Info go to www.hckorygolfers.com and you will find Info

[ChipNRun]

My info duplicates that of JoeGruen.

 

From the late 1960s onward, most of pro shops I saw used nylon fishing line to re-whip the persimmon woods.

[teevons]

Here's a link to a post I made about a year ago which links to a source for whipping for the OP (scroll down a bit) and also some how-to videos for sdrandea:

 

http://www.golfwrx.c.../#entry15290824

 

 

Here's a pic of what they look like installed on a MacGregor project I call "St Paddy's":

 

 

 

 

 

Just another great set I bought from Teevons. Thanks again, Tim.

I love the different color, a project I have yet to tackle is the Hogan womens color scheme for their woods for women in the late 60' early 70's I think there were 8 different colors for the ladies woods. I have collected I think all the women's sets I need, Just need to take the time to do the job. Would look real cool displayed. I have a colored ad/ picture somewhere

[Bob F]

Hi,

 

Original whipping thread then try "Stewarts pitched thread" from Diamond Golf, Arundel, England toll free from USA 844-552-3437,

 

Aprox $30 for 500 metres, original waxed thread used in the days of hickory clubs and persimmon. Do not use fishing whipping thread as its smaller in diameter and should be coated with a resin/varnish sealer as its not waterproof.

 

regards,

 

Bob

Bob Frost Custom Golf, UK

[Bob F]

Slight threadjack - can someone direct me to the best internet link for hickory whipping instructions? Thanks!

 

Hi,

 

Enter this link for hickory club whipping on you tube

 

 

regards,

 

Bob

 

Bob Frost Custom Golf UK

[Bigarch]

Thanks Bob!

[mubob1977]

I’ve seen several threads about whipping, but I’m hoping to get some additional advice on what type of thread the forum prefers for whipping 1950s-60s era persimmon woods.

[James the Hogan Fan]

I had emailed the Ashaway Line and Twine company on the matter, and got this from them:

Hello James,

 

Yes, Ashaway makes the 20-A- 4 black golf whipping. The minimum order is $100. This is 2 x 1500 yard spools @ $50/spool. Please call me at 800-556-7260 with a Visa or MC if you would like to place an order.

 

Sincerely Yours,

 

Steve Crandall

 

But since I did not proceed to order from them (it was only 2990 yards more than I needed) I cannot speak to the nature of the product, beyond that a string company has a specific product called golf whipping twine. I wound up using nylon fishing line...

[oldschoolrocker]

As a complete home amateur do it yourself type I have been using a waxed sewing thread available at the local Walmart with good results.

[mubob1977]

I had emailed the Ashaway Line and Twine company on the matter, and got this from them:

Hello James,

 

Yes, Ashaway makes the 20-A- 4 black golf whipping. The minimum order is $100. This is 2 x 1500 yard spools @ $50/spool. Please call me at 800-556-7260 with a Visa or MC if you would like to place an order.

 

Sincerely Yours,

 

Steve Crandall

 

But since I did not proceed to order from them (it was only 2990 yards more than I needed) I cannot speak to the nature of the product, beyond that a string company has a specific product called golf whipping twine. I wound up using nylon fishing line...

 

What weight fishing line have you used?

[deejaid]

Give The Golfworks a call. It isn’t listed on their website, but they do carry it, although I did buy all their stock last time I ordered :D

 

They did say they were getting more though.

[James the Hogan Fan]

I had emailed the Ashaway Line and Twine company on the matter, and got this from them:

Hello James,

 

Yes, Ashaway makes the 20-A- 4 black golf whipping. The minimum order is $100. This is 2 x 1500 yard spools @ $50/spool. Please call me at 800-556-7260 with a Visa or MC if you would like to place an order.

 

Sincerely Yours,

 

Steve Crandall

 

But since I did not proceed to order from them (it was only 2990 yards more than I needed) I cannot speak to the nature of the product, beyond that a string company has a specific product called golf whipping twine. I wound up using nylon fishing line...

 

What weight fishing line have you used?

 

I used this stuff at 35lb test (in black): https://www.amazon.com/SeaKnight-Monster-Monofilament-Fishing-Material/dp/B01KLW9GN8/ref=mp_s_a_1_2?ie=UTF8&qid=1547069250&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=monofilament%2Bfishing%2Bline%2Bblack&dpPl=1&dpID=516ATVOq66L&ref=plSrch&th=1&psc=1

 

I would use it only if you can’t find anything else. It’s good and tough nylon, but it’s a little green/translucent and slightly smaller diameter than some of the original stuff. I just wanted something and fast, so I ordered it.

 

Edit: and I haven’t used the club yet to know how it’ll hold up.

[JoeGruen]

Bigarch, HoldenCornfield:

 

I re-read my own post and realized that it was more than 8 years ago that I purchased the items that I depicted. From a short Google search it became apparent, that these things are no longer available on the market. I have to apologize for my misleading contribution. However, I have some whipping - cord surplus left, but not too much. If anyone of you over here in Europe is in dire need for one or two clubs short term, just p.m. me. I will help you out.

 

Best regards, Joe

[ChronicSlicer]

Just a thought..https://www.tacklewarehouse.com/Fitzgerald_Vursa_Braided_Line_Black/descpage-FFVB.html

[tlhorsh]

I'm sure someone hit this before, but later model woods seem to have a monofilament instead of a braided whipping...i just searched "black monofilament" on the old google machine and seems like there are a lot of possibilities for a suitable alternative...

[Bigarch]

Took the tip from JoeGruen last year and found vinyl bead cord at Hobby Lobby. They also have a waxed looking version Been using it ever since. Very easy to work with and it does look authentic. It can stretch or break if you get a little too aggressive with it, but I haven't found anything better that's readily available and affordable.

[BIG STU]

Give The Golfworks a call. It isn’t listed on their website, but they do carry it, although I did buy all their stock last time I ordered :D

 

They did say they were getting more though.

LOL with what you have going on you are going to need that much :taunt: